Unigreen P400, P600, P500, P300 manual Mixing, Manual Premixing, 12.2PREMIXER on Cover Optional

Page 15

4.12 MIXING

The active principle can be mixed using the relevant stirrers before and during the treatment. Correct mixing and stirring is the basis of the correct distribution on the crops. We recommend some useful accessories such as the premixer for powders and liquids (see the following paragraph).

The machines in the Airdrop-MFC range can be equipped with 2 hydro- pneumatic agitators, supplied by the relevant taps in the auxiliaries taps block (paragraph 4.9).

o mix the product in the tank run the stirrer (or ejector) for roughly 10-15 minutes at the maximum pressure available

4.12.1 MANUAL PREMIXING

Dilute the active principle by hand before introducing it into the tank, (you must wear suitable protective clothing such as rubber gloves, a mask or goggles, overalls, etc.).

WARNING: the indications to follow for using chemical products are indicated in paragraph 2.2.1.

4.12.2PREMIXER ON COVER (OPTIONAL):

Open the cover and pour all of the chemical powder into the filter, close the cover and open the supply tap until all of the powder has dissolved.

4.12.2PREMIXER ON COVER (OPTIONAL):

Open the cover and pour all of the chemical powder into the filter, close the cover and open the supply tap until all of the powder has dissolved.

4.12.4COVER WASHER FOR CHEMICAL CONTAINERS(OPTIONAL)

The washer for chemical containers (FIG.15) is installed as standard in the hatch on the entire Airdrop-MFC range.

To wash the container, proceed as follows: -Lift the cover of the tank

-Open auxiliary tap (D) of the pressure regulator (see paragraph 4.8.1) supplying it with a pressure of under 8 bar

-Introduce the tin into the hopper, inserting the washing pipe into the tin. -Press the tin onto the pipe until it has been washed clean.

-At the end of the operations close the tap (D) of the pressure regulator again.

FIG. 13

FIG. 15

Box washing device on cover

unigreen 15

Image 15
Contents 09/2006 USE and Maintenance ManualSummary Hand Lances Maintenance Guarantee Composition of the ManualProduct Responsibility Unigreen spa is not responsible if Key to the symbols Recommendations Using Chemical ProductsIntended USE Prohibited USETables of Fittings Allowed Characteristics and SpecificationsWeather Conditions Driving on the RoadDescription of the Machine Noise Level of the MachineStandards of Reference InstructionsPreliminary Checks Transporting and Moving the MachineMounted Atomisers Parking Hydraulic Connection to the Distributors Tractor CouplingTHREE-POINT Coupling For verification use the formula shown hereCardan Shaft PumpSuction Filter General Instructions Pressure RegulatorComponents of the Pressure Regulator Control box for GCP Elettrico electrical regulatorsDelivery Filters only Equipped Models Auxiliaries Taps BlockTank rinsing Ejector Agitator Filling the Tank Test with Clean Water12.4COVER Washer for Chemical Containersoptional MixingManual Premixing 12.2PREMIXER on Cover Optional13.1CIRCUIT Washer and Tank Washer Washing the AtomiserBlower Group Multiplier FAN UnitClutch Super Spalliera for Espalier Distributor AccessoriesPolipo Spalliera Super Spalliera Polipo for EspalierOIL Feed from Tractor for hydraulic systems HydraulicsDescription of Type of Nozzles LOW Volume Conical Nozzles 150-500L/HASpraying Description of the Diffusers Description of Type of JetsSpeed 6 Km. / h Calibrating Turbo TeutonCleaning the Nozzles MaintenanceProgrammed Maintenance Routine MaintenanceRepairs Extraordinary MaintenancePutting Back Into Service After Winter Layup Multiplier LubricationDemolition and Disposal Materials for DemolitionElectrical and Electronic Apparatus Waste Eeaw Commonly used spare parts Tables for Calibrating Polipo 4+4 16 Nozzles Narrow Rows Tables for Calibrating Polipo 4+4 8 Nozzles Narrow RowsISO 16 Getti Tables for Calibrating Polipo 5+5 20 Nozzles Narrow Rows Tables for Calibrating Polipo 5+5 10 Nozzles Narrow RowsISO Arancio -Orange ISO Giallo -Yellow Tables for Calibrating Super Spalliera 4+4 16 Nozzles Tables for Calibrating Super Spalliera 4+4 8 NozzlesTables for Calibrating RV-GDC 5+5 20 Nozzles Tables for Calibrating RV-GDC 5+5 10 NozzlesTables of Delivery of Nozzles for Hand Lances Pressure50 h 300 h Table of Programmed Maintenance OperationTAB.17B Allowed Fittings Unigreen Member of the group

P400, P300, P500, P600 specifications

Unigreen is a leading manufacturer in the agricultural machinery sector, known for its innovative solutions that meet the growing demands of modern farming. Among its impressive lineup, the Unigreen P400, P300, P600, and P500 series have garnered attention for their advanced features, cutting-edge technologies, and exceptional performance.

The Unigreen P400 is a versatile sprayer suitable for medium to large-sized farms. One of its key features is the high-capacity tank that minimizes the need for frequent refills, allowing farmers to cover substantial areas in a single pass. The sprayer is equipped with advanced precision technology that ensures uniform application of chemicals, which is crucial for maximizing crop yield while minimizing waste.

On the other hand, the Unigreen P300 is designed for smaller operations but does not compromise on performance. It boasts a compact design that makes it easy to maneuver in tight spaces. Its lightweight construction facilitates transport, and it incorporates user-friendly controls that enhance the operational experience for farmers. The P300's efficient spraying system reduces drift, ensuring that chemicals are applied exactly where needed, thus protecting the surrounding environment.

Moving onto the P600 model, this sprayer is engineered for large-scale agricultural operations. It features an extensive range of customizable options that cater to specific farming needs. The P600's robust build is complemented by powerful engines that ensure reliability even in demanding conditions. Additionally, it incorporates state-of-the-art GPS and automated guidance systems, allowing for precise inter-row spraying and reducing overlap—this significantly improves efficiency and decreases operational costs.

Lastly, the Unigreen P500 bridges the gap between the P400 and P600, offering advanced technology in a slightly smaller package. One of its standout characteristics is the innovative boom design that provides exceptional stability in various terrains. The sprayer includes advanced monitoring systems that track performance metrics in real-time, enabling farmers to make informed decisions while in the field.

Overall, the Unigreen P series sprayers are distinguished by their user-centric designs, technological advancements, and high-performance capabilities. Their commitment to sustainability and efficiency makes them an excellent investment for progressive farming operations looking to enhance productivity and optimize resource use. Unigreen continues to innovate, ensuring that their products remain at the forefront of agricultural technology.