Optima Batteries P90 manual Error Messages, 162, Display Description Solution

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

	Display	Description	Solution	A
	O	Clock not set.	Set clock.	138
	(blinks)
	B	Battery is running low.	Prepare to charge or change battery.	16, 18
	N	Battery exhausted.	Charge or change battery.	16, 18
	Battery exhausted.
			Turn off camera, and allow battery to
			cool down before resuming use. After
			five seconds, this message will
			disappear, the monitor will turn off,
	P	Battery temperature is	and the power-on lamp will blink	19
	Battery temperature high	high.	rapidly. After the lamp blinks for three
			minutes, the camera will turn off
			automatically, but you can also press
			the power switch to turn it off
			manually.
	N	Write-protect switch is	Slide the write-protect switch to
	Memory card is write			23
		in “lock” position.	“write” position.
	protected.
	P		• Use an approved card.	155
	This card cannot be used.	Error accessing	• Check that connectors are clean.	22
	P	memory card.	• Confirm that memory card is	22
	This card cannot be read.		correctly inserted.
	P
	Card is not formatted.	Memory card has not	Choose Yes and press the kbutton
	Format card?	been formatted for use		23
			to format memory card.
	No	in this camera.
	Yes
			• Choose lower image quality or	107, 108
			smaller image size.
Technical	N	Memory card is full.	• Delete pictures or sound files.	30, 86,
			• Remove memory card and use	22
	Out of memory.		• Replace memory card.	90, 132
				22
Notes			internal memory.

162