Basic Camera Setup: The Setup Menu

dBlink Warning

Press the dbutton Mz (Setup menu) (A135) MBlink warning

Set whether or not to detect human subjects with eyes closed when shooting pictures using face priority (A123) in any mode other than asmile timer/yblink proof (A54).

On (default setting)

When the camera detects that one or more human subjects have closed their eyes shortly after recognizing the faces and shooting them, the Did someone blink? screen will appear on the monitor.

The face of the human subject that may have closed his/her eyes is framed by a yellow border. You can check the picture taken and determine if you need to take the picture again.

See “Operating the Did someone blink? Screen” (A150) for more information.

Off

Blink warning doesn’t take effect.

Shooting, Playback and Setup Menus

BNotes on Blink Warning

The camera does not perform blink warning in the following cases.

-When a (smile timer) (A54) is used

-When Continuous, BSS, Multi-shot 16 or Intvl timer shooting is selected for Continuous

-When focus mode is set to p (macro close-up)

When y(blink proof) is used for shooting, the setting for Blink warning is ignored and whenever smiling faces are detected, the camera takes two pictures and chooses an image in which the subjects’ eyes are open.

149

Page 161
Image 161
Optima Batteries P90 manual Blink Warning, 149, Press the dbutton Mz Setup menu A135 MBlink warning