Caring for the Camera

Cleaning

 

Avoid touching glass parts with your fingers. Remove dust or lint with a

Lens/

blower (typically a small device with a rubber bulb attached to one end that

is pumped to produce a stream of air out the other end). To remove

electronic

fingerprints or other stains that cannot be removed with a blower, wipe the

viewfinder

lens with a soft cloth, using a spiral motion that starts at the center of the

 

lens and working toward the edges. If this fails, clean the lens using a cloth

 

lightly dampened with commercial lens cleaner.

Monitor

Remove dust or lint with a blower. To remove fingerprints and other stains,

clean the monitor with a soft, dry cloth, being careful not to apply pressure.

 

 

Use a blower to remove dust, dirt or sand, then wipe gently with a soft, dry

Body

cloth. After using the camera at the beach or seaside, wipe off any sand or

salt with a dry cloth lightly dampened with fresh water, then dry

 

thoroughly. Note that foreign matter inside the camera could cause

 

damage not covered by the warranty.

 

 

Do not use alcohol, thinner, or other volatile chemicals.

Technical Notes

160

Page 172
Image 172
Optima Batteries P90 manual Cleaning, 160, Do not use alcohol, thinner, or other volatile chemicals