Optima Batteries P90 manual Sound Settings, Auto Off, 146, Adjust the following sound settings

Basic Camera Setup: The Setup Menu

iSound Settings

Press the dbutton Mz (Setup menu) (A135) MSound settings

Adjust the following sound settings.

Button sound

Turn button sound On (default setting) or Off. A beep will sound once when operations are completed successfully, twice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on.

Shutter sound

Choose shutter sound from On (default setting) or Off.

Shooting, Playback and Setup Menus

kAuto Off

Press the dbutton Mz (Setup menu) (A135) MAuto off

If no operations are performed for the selected length of time, the monitor will turn off and the camera enters standby mode (A19) to reduce drain on the batteries. The power-on lamp blinks in standby mode. If no operations are performed for another three minutes, the camera will turn off automatically.

Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.

CCanceling Standby Mode

Cancel standby mode and reactivate the monitor by pressing the power switch, shutter-release button or the cbutton, or by rotating the mode dial.

BNotes on Auto Off

The time taken for the monitor to enter standby mode is as follows.

•When menus are displayed: three minutes

•During slideshow playback: maximum of 30 minutes

•When the AC adapter is connected: 30 minutes

146