Unigreen P400, P600, P500, P300 manual Hydraulics, OIL Feed from Tractor for hydraulic systems

Page 19

5.4HYDRAULICS

The RV, VL, VLX, FXF and FXL model distributor accessories have hydraulics that can be controlled by the operator directly from the seat in the cab.

Check that no one and nothing is in the area where the booms will open; particular attention should be paid to the presence of any electric power lines.

The hydraulic plant can be fed from the hydraulic pump of the tractor.

The hydraulics can be controlled using the lever of the tractor (RV and VL) or a hydraulic distributor with mechanical or electro-hydraulic command with switches in the cabin (VLX, FXF and FXL).

-All of the controls on both versions are sustained action controls and each lever or switch has a pictogram of the relevant operation it controls.

WARNING: with hydraulic booms, don’t stand in the range of action of the machine.

Pay attention to the integrity and efficiency of the hydraulic components and in particular to the pipes to prevent the risk of bursting.

Do a full check on the pipes and components at least once a year, we recommend replacing hydraulic pipes every 3-4 years.

5.4.1OIL FEED FROM TRACTOR (for hydraulic systems)

Connect the delivery and discharge quick-fit coupling to the respective connections, respecting the direction of flow.

The distributor inlet pipe is connected to the aluminium flow separator valve next to the distributor.

The flow separator must be adjusted correctly so it sends less than 4-5 L/1° to the distributor.

To prevent the cylinders moving at a dangerous speed, adjust the relevant chokes near the cylinders. If the registration ringnuts aren’t visible then fixed chokes are fitted. The chokes are fitted on the discharge line of the movement to slow.

Any impurities in the oil could block the chokes and as a consequence block the cylinder; remove the dirt if necessary. The maximum pressure valves of the distributors are regulated to a pressure of around 150 bar.

To prevent the excessive heating of the oil we recommend supplying the distributor of the sprayer only when the cylinders are being used.

We recommend having qualified personnel do any adjustments.

Pay attention to the integrity and efficiency of the hydraulic components and in particular to the pipes to prevent the risk of bursting.

Do a full check on the pipes and components at least once a year, we recommend replacing hydraulic pipes every 3-4 years.

unigreen 19

Image 19
Contents 09/2006 USE and Maintenance ManualSummary Hand Lances Maintenance Composition of the Manual GuaranteeProduct Responsibility Unigreen spa is not responsible if Key to the symbols Recommendations Using Chemical ProductsIntended USE Prohibited USETables of Fittings Allowed Characteristics and SpecificationsWeather Conditions Driving on the RoadDescription of the Machine Noise Level of the MachineStandards of Reference InstructionsTransporting and Moving the Machine Preliminary ChecksMounted Atomisers Parking Hydraulic Connection to the Distributors Tractor CouplingTHREE-POINT Coupling For verification use the formula shown herePump Cardan ShaftSuction Filter General Instructions Pressure RegulatorComponents of the Pressure Regulator Control box for GCP Elettrico electrical regulatorsAuxiliaries Taps Block Delivery Filters only Equipped ModelsTank rinsing Ejector Agitator Filling the Tank Test with Clean Water12.4COVER Washer for Chemical Containersoptional MixingManual Premixing 12.2PREMIXER on Cover Optional13.1CIRCUIT Washer and Tank Washer Washing the AtomiserMultiplier FAN Unit Blower GroupClutch Super Spalliera for Espalier Distributor AccessoriesPolipo Spalliera Super Spalliera Polipo for EspalierOIL Feed from Tractor for hydraulic systems HydraulicsDescription of Type of Nozzles LOW Volume Conical Nozzles 150-500L/HASpraying Description of the Diffusers Description of Type of JetsSpeed 6 Km. / h Calibrating Turbo TeutonCleaning the Nozzles MaintenanceProgrammed Maintenance Routine MaintenanceRepairs Extraordinary MaintenancePutting Back Into Service After Winter Layup Multiplier LubricationMaterials for Demolition Demolition and DisposalElectrical and Electronic Apparatus Waste Eeaw Commonly used spare parts Tables for Calibrating Polipo 4+4 16 Nozzles Narrow Rows Tables for Calibrating Polipo 4+4 8 Nozzles Narrow RowsISO 16 Getti Tables for Calibrating Polipo 5+5 20 Nozzles Narrow Rows Tables for Calibrating Polipo 5+5 10 Nozzles Narrow RowsISO Arancio -Orange ISO Giallo -Yellow Tables for Calibrating Super Spalliera 4+4 16 Nozzles Tables for Calibrating Super Spalliera 4+4 8 NozzlesTables for Calibrating RV-GDC 5+5 20 Nozzles Tables for Calibrating RV-GDC 5+5 10 NozzlesTables of Delivery of Nozzles for Hand Lances Pressure50 h 300 h Table of Programmed Maintenance OperationTAB.17B Allowed Fittings Unigreen Member of the group

P400, P300, P500, P600 specifications

Unigreen is a leading manufacturer in the agricultural machinery sector, known for its innovative solutions that meet the growing demands of modern farming. Among its impressive lineup, the Unigreen P400, P300, P600, and P500 series have garnered attention for their advanced features, cutting-edge technologies, and exceptional performance.

The Unigreen P400 is a versatile sprayer suitable for medium to large-sized farms. One of its key features is the high-capacity tank that minimizes the need for frequent refills, allowing farmers to cover substantial areas in a single pass. The sprayer is equipped with advanced precision technology that ensures uniform application of chemicals, which is crucial for maximizing crop yield while minimizing waste.

On the other hand, the Unigreen P300 is designed for smaller operations but does not compromise on performance. It boasts a compact design that makes it easy to maneuver in tight spaces. Its lightweight construction facilitates transport, and it incorporates user-friendly controls that enhance the operational experience for farmers. The P300's efficient spraying system reduces drift, ensuring that chemicals are applied exactly where needed, thus protecting the surrounding environment.

Moving onto the P600 model, this sprayer is engineered for large-scale agricultural operations. It features an extensive range of customizable options that cater to specific farming needs. The P600's robust build is complemented by powerful engines that ensure reliability even in demanding conditions. Additionally, it incorporates state-of-the-art GPS and automated guidance systems, allowing for precise inter-row spraying and reducing overlap—this significantly improves efficiency and decreases operational costs.

Lastly, the Unigreen P500 bridges the gap between the P400 and P600, offering advanced technology in a slightly smaller package. One of its standout characteristics is the innovative boom design that provides exceptional stability in various terrains. The sprayer includes advanced monitoring systems that track performance metrics in real-time, enabling farmers to make informed decisions while in the field.

Overall, the Unigreen P series sprayers are distinguished by their user-centric designs, technological advancements, and high-performance capabilities. Their commitment to sustainability and efficiency makes them an excellent investment for progressive farming operations looking to enhance productivity and optimize resource use. Unigreen continues to innovate, ensuring that their products remain at the forefront of agricultural technology.