Unigreen P300, P600, P500 Intended USE, Prohibited USE, Using Chemical Products, Recommendations

Page 6

2.1INTENDED USE

The sprayer in this series is built for agricultural use. The materials used are resistant to normal chemical products used in agricultural spraying (or herbicides) at the time of construction.

Any other use is not allowed and the manufacturer is not responsible for any damage caused by aggressive, dense or sticky chemicals.

THE USE OF THE MACHINE BY PERSONS UNDER 18 YEARS OF AGE IS STRICTLY FORBIDDEN

The use of liquid fertilizers in suspension is not allowed, while the use of the same in a solution is possible if requested when the machine is ordered from Unigreen and in any case changing some of the parts described in the handbooks of the regulator, such as the manometer (stainless steel), the nozzles (large diameter ceramic) and eliminating the fine mesh filters to prevent blockages.

2.2PROHIBITED USE

Using the machine with the following products is strictly forbidden:

=Paints of any kind and type

=Solvents or thinners for paints of any kind and type

=Combustibles or lubricants of any kind and type

=LPG or gas of any kind and type

=Flammable liquids of any kind and type

=Liquid foodstuffs, whether for animals or humans

=Liquids containing granules or consistent solids

=Mixtures of various incompatible chemical products

=Liquid fertilizer or manure in suspension with lumps and/or that is particularly dense

=Liquids with a temperature of over 40°C

=Any products that aren’t suitable for the specific use of the machine.

2.3USING CHEMICAL PRODUCTS

All pesticides or herbicides can be dangerous to humans and the environment if used erroneously or inadvertently.

Therefore we recommend that only suitably trained persons should use these products (license) and in any case only after having carefully read the instructions on the container.

2.3.1REGULATIONS FOR THE USE OF CHEMICAL PRODUCTS Some recommendations for avoiding damage and accidents:

=Keep the machine in a suitable, protected place with no access for children or strangers

=Handle the products with care, wearing rubber acid-proof gloves, goggles- face masks or filtering helmets, overalls made of water-repellent fabrics or TIVEK and boots made of rubber or similar materials.

=If chemical products or mixtures of product come into contact with the eyes or are swallowed consult a doctor immediately, taking the label of the product with you.

=Wash all clothes that come into contact with the chemical, whether diluted or undiluted, thoroughly before using them again.

=Don’t smoke, drink or eat when preparing or spraying the mix or near or in the fields treated.

=DON’T ENTER THE TANK: the residues of a chemical product can cause poisoning and suffocation.

=When spraying, respect safe distances from residential areas, water courses, roads, sports centres and public parks or paths.

=Thoroughly wash the containers of plant protection products using the relevant accessories, rinsing several times with clean water. The liquids used for washing can be used for treatment.

=Collect the washed containers and send them to the relevant collection centres. Never dispose of them in the environment and don’t use them again for any other purpose. It is good practice to knock a hole in the bottom of the tins so they can’t be used again.

=When you have finished spraying, wash the sprayer thoroughly, diluting the residues with a quantity of water at least 10 times that of the residues, spraying the resulting mix over the treated field.

 

2.4 RECOMMENDATIONS

 

a) Refer to the present handbook for the use and maintenance of the frame,

 

tank, auto-levelling systems, elevators, mechanical and hydraulic herbicide

6 unigreen

booms, spray booms and hose reels.

Image 6
Contents USE and Maintenance Manual 09/2006Summary Hand Lances Maintenance Guarantee Composition of the ManualProduct Responsibility Unigreen spa is not responsible if Key to the symbols Prohibited USE Using Chemical ProductsIntended USE RecommendationsDriving on the Road Characteristics and SpecificationsWeather Conditions Tables of Fittings AllowedInstructions Noise Level of the MachineStandards of Reference Description of the MachinePreliminary Checks Transporting and Moving the MachineMounted Atomisers Parking For verification use the formula shown here Tractor CouplingTHREE-POINT Coupling Hydraulic Connection to the DistributorsCardan Shaft PumpSuction Filter Control box for GCP Elettrico electrical regulators Pressure RegulatorComponents of the Pressure Regulator General InstructionsDelivery Filters only Equipped Models Auxiliaries Taps BlockTank rinsing Ejector Agitator Test with Clean Water Filling the Tank12.2PREMIXER on Cover Optional MixingManual Premixing 12.4COVER Washer for Chemical ContainersoptionalWashing the Atomiser 13.1CIRCUIT Washer and Tank WasherBlower Group Multiplier FAN UnitClutch Polipo for Espalier Distributor AccessoriesPolipo Spalliera Super Spalliera Super Spalliera for EspalierHydraulics OIL Feed from Tractor for hydraulic systemsDescription of Type of Jets LOW Volume Conical Nozzles 150-500L/HASpraying Description of the Diffusers Description of Type of NozzlesCalibrating Turbo Teuton Speed 6 Km. / hRoutine Maintenance MaintenanceProgrammed Maintenance Cleaning the NozzlesMultiplier Lubrication Extraordinary MaintenancePutting Back Into Service After Winter Layup RepairsDemolition and Disposal Materials for DemolitionElectrical and Electronic Apparatus Waste Eeaw Commonly used spare parts Tables for Calibrating Polipo 4+4 8 Nozzles Narrow Rows Tables for Calibrating Polipo 4+4 16 Nozzles Narrow RowsISO 16 Getti Tables for Calibrating Polipo 5+5 10 Nozzles Narrow Rows Tables for Calibrating Polipo 5+5 20 Nozzles Narrow RowsISO Arancio -Orange ISO Giallo -Yellow Tables for Calibrating Super Spalliera 4+4 8 Nozzles Tables for Calibrating Super Spalliera 4+4 16 NozzlesTables for Calibrating RV-GDC 5+5 10 Nozzles Tables for Calibrating RV-GDC 5+5 20 NozzlesPressure Tables of Delivery of Nozzles for Hand LancesTable of Programmed Maintenance Operation 50 h 300 hTAB.17B Allowed Fittings Unigreen Member of the group

P400, P300, P500, P600 specifications

Unigreen is a leading manufacturer in the agricultural machinery sector, known for its innovative solutions that meet the growing demands of modern farming. Among its impressive lineup, the Unigreen P400, P300, P600, and P500 series have garnered attention for their advanced features, cutting-edge technologies, and exceptional performance.

The Unigreen P400 is a versatile sprayer suitable for medium to large-sized farms. One of its key features is the high-capacity tank that minimizes the need for frequent refills, allowing farmers to cover substantial areas in a single pass. The sprayer is equipped with advanced precision technology that ensures uniform application of chemicals, which is crucial for maximizing crop yield while minimizing waste.

On the other hand, the Unigreen P300 is designed for smaller operations but does not compromise on performance. It boasts a compact design that makes it easy to maneuver in tight spaces. Its lightweight construction facilitates transport, and it incorporates user-friendly controls that enhance the operational experience for farmers. The P300's efficient spraying system reduces drift, ensuring that chemicals are applied exactly where needed, thus protecting the surrounding environment.

Moving onto the P600 model, this sprayer is engineered for large-scale agricultural operations. It features an extensive range of customizable options that cater to specific farming needs. The P600's robust build is complemented by powerful engines that ensure reliability even in demanding conditions. Additionally, it incorporates state-of-the-art GPS and automated guidance systems, allowing for precise inter-row spraying and reducing overlap—this significantly improves efficiency and decreases operational costs.

Lastly, the Unigreen P500 bridges the gap between the P400 and P600, offering advanced technology in a slightly smaller package. One of its standout characteristics is the innovative boom design that provides exceptional stability in various terrains. The sprayer includes advanced monitoring systems that track performance metrics in real-time, enabling farmers to make informed decisions while in the field.

Overall, the Unigreen P series sprayers are distinguished by their user-centric designs, technological advancements, and high-performance capabilities. Their commitment to sustainability and efficiency makes them an excellent investment for progressive farming operations looking to enhance productivity and optimize resource use. Unigreen continues to innovate, ensuring that their products remain at the forefront of agricultural technology.