Land Pride OS1572, OS1548 manual Rear Roller Assembly, Gauge Wheel Drive, Rear Roller Drive

Page 13

Land Pride

Table of Contents

Section 1: Assembly & Set-up

15.Torque all bolts to the proper specifications, see Torque Values Chart in the “Appendix” starting on Page 48. Tighten bolts in the following order:

a.Rotor to rotor drive hub.

b.Bearing mount plate to Overseeder main frame.

c.Bearing cover thru bearing mount plate to bearing mount.

16.Position hub inside bearing mount against bearing seal and tighten set screws.

17.Add grease to right hand bearing by using grease zerk located on the right hand bearing cover.

18.Reassemble gauge wheel & drive chains. Reattach chain guard.

Rear Roller Assembly

Refer to Figure 1-6:

1.Attach packer wheel assembly (#1) to back of Overseeder frame using 1” x 3 11/16” long clevis pins (#2), 1” flat washers (#3) and 3/16” x 1 3/4” long cotter pins (#4). If your Overseeder has a rear roller drive, see Rear Roller Drive below and skip step 2.

2.Attach support chains (#5) to back of frame and to packer wheel arms using 5/16” utility clevises (#6).

Gauge Wheel Drive

Refer to Figure 1-7:

1.Bolt drive spindle and hub assembly (#1) to the right hand gauge wheel arm (#2) using 5/16” x 1 1/2” long bolts (#3) and 5/16” lock nuts (#4).

2.Install wheel assembly (#5) to right hand wheel hub with 1/2” x 1 3/8” long lug bolts (#6) and 1/2” lug nuts (#7). Follow the same steps for the left hand side, except use non-drive spindle and hub assembly (#8) and bolts (#6).

IMPORTANT: Roller chains must be installed on the seeder at the correct gear ratio. Refer to Seeding Adjustments in the “Adjustments” section starting on Page 18 to determine correct chain installation.

3.Bolt chain guard (#9) to the right hand frame end plate using 1/4” x 1/2” long bolts (#10).

Rear Roller Drive

Refer to Figure 1-8:

1.Attach solid links (#1) to back of frame with 5/8” x 2 3/4” long bolts (#2) on top and 5/8” x 1 3/4” bolts (#4) on the bottom.

IMPORTANT: Roller chains must be installed on the seeder at the correct gear ratio. Refer to Seeding Adjustments in the “Adjustments” section starting on Page 18 to determine correct chain installation.

2.Bolt chain guard (#9) to end plate using 5/16” x 6” bolt (#10), 5/16” lock washer (#11) and 1/4” x 1/2” bolts (#12).

3.If rear roller (#13) is in the short arm position as shown, attach front chain guard (#7) and rear chain guard (#6) with 5/16” x 2 1/2” bolts (#8) in the locations shown.

14599

Rear Roller Installation

Figure 1-6

14598

Gauge Wheel Drive Assembly

Figure 1-7

14601

Rear Roller Drive Assembly with Short Arm

Figure 1-8

2-16/09

OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M

11

Image 13
Contents Overseeder S/N 166724+ Table of Contents Safety at All Times Use a Safety Chain Use Safety Lights and DevicesPractice Safe Maintenance Transport Machinery SafelyWear Protective Equipment Prepare for EmergenciesKeep Riders Off Machinery Avoid High Pressure Fluids Hazard818-552C 818-055C818-540C 818-129C 818-130C 818-132C 818-543C 818-858C838-111C Application Using This ManualOwner Assistance Further Assistance Land Pride Service Department East North StreetTractor Requirements Pre-Assembly ChecklistSling Brackets Torque RequirementsBearing Mount Plate & Rotor Assembly RH Side Gauge Wheel Drive DisassemblyRotor to Overseeder Assembly RH Side Rotor to Overseeder Installation-Left Hand SideGauge Wheel Drive Rear Roller AssemblyRear Roller Drive Check Driveline Minimum Length Driveline InstallationLong Arm Chain Guard Location Maximum PTO driveline Movement During OperationPTO Driveline Shortening Check Driveline Maximum LengthOperating Check List Operating ChecklistTractor Hook-Up CheckTransporting Filling the Seed Box General Notes for Field Operations How the Seeder WorksParking General Operating Instructions Number of Gauge Wheel & Rear Roller Rotations Seeding AdjustmentsGauge wheel drive units Raise and support Coverage= 1000 Sq. Ft Acre Model No Wheel RollerRear Roller Drive Gauge Wheel DriveDrive Sprocket Alignments Drive Sprocket ArrangementsFescue Fine Blade, Turf Type Pounds per Acre Seed Rate Charts EnglishFescue Fine Blade, Turf Type Pounds per 1000 Square Feet Small Seeds Attachment Seed Rate Chart Fescue Fine Blade, Turf Type Kilograms per Hectare Seed Rate Charts MetricLovegrass Sand Kilograms per 1000 Square Meters Gauge Wheel Drive Rotary Cutting Depth AdjustmentRear Roller Drive Front Roller Turnbuckle Floating Top Link AdjustmentRear Roller Drive w/Front Roller Floating Top LinkTo adjust height of tines Rear Arm Length AdjustmentTo adjust angle of tines Tine Attachment OptionalRotor Drive Chain Adjustment Feed Cup Drive System AdjustmentSlit Seeder Adjustment Rotor Drive Chain AdjustmentSmall Seeds Attachment Optional Small Seeds Drive AdjustmentOS1548 228 OS1572 16111667 Cup Setting Small Seeds Seed Rate Chart EnglishPounds per 1000 square foot and Pounds per acre Individual Knife Replacement MaintenanceRotor Maintenance StorageLeft Hand Rotor Disassembly Right Hand Rotor DisassemblyOverseeders With Rear Roller Drive Refer to Figure Rear Roller Drive DisconnectRear Roller Disassembly Rear Roller MaintenanceRear Roller Assembly Rear Roller InspectionDriveline Slip Clutches Clutch Disassembly, Inspection & AssemblyType a Clutches Clutch Run-In Type C Clutch Run-InOS1548 2-Plate Assembly Step OS1548 2-Plate Disassembly StepOS1572 4-Plate Assembly Step OS1572 4-Plate Disassembly StepType B Clutch Assembly Disassembly and AssemblyType B Clutch Clutch Run-In Hex Head Socket BoltsHours Lubrication PointsSeasonally Feed Cup Drive Sprocket Rear Roller BearingsFeed Cup Drive Chains Agitator Drive ChainGearbox RequiredDriveline Chaincase Drive Sprocket Hanger BearingRear Tine Attachment Slit Seeder AttachmentSlit Seeder Attachment Rear Tine AttachmentFront Roller Attachment Adjustments, onFront Roller Attachment Small Seeds Attachment Adjustments, on Lubrication, on Troubleshooting, onLand Pride Overseeder Size Drive System OS1548 OS1572 OS1548 & OS1572 SeriesOptional Add-on Equipment 26728 OS15 Series Overseeders Features BenefitsProblem Solution Troubleshooting ChartTire Inflation Chart Torque Values ChartAdditional Torque Values Overall Unit and Driveline One year Parts and Labor WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

OS1572, OS1548 specifications

The Land Pride OS1548 and OS1572 are outstanding implements designed to enhance the efficiency and productivity of landscape and turf maintenance. These models are part of Land Pride's lineup of high-quality equipment, built for durability and performance.

One of the main features of the OS1548 and OS1572 is their robust construction. Each model is meticulously crafted using high-strength steel, which gives them a solid framework that can withstand rigorous daily use. This durability is complemented by high-quality welds and a corrosion-resistant finish, ensuring that these implements will serve users well over the years, even in challenging environments.

Both models are equipped with a high-capacity hopper that makes them suitable for all types of seed and fertilizer applications. The OS1548 has a 48-inch working width, while the OS1572 boasts a larger 72-inch width. This variety allows operators to choose a model that best fits their specific needs, whether for residential or commercial use. The ample hopper capacity allows for extended work periods without constant refilling, maximizing efficiency and minimizing downtime.

The OS1548 and OS1572 come with a unique broadcasting system that ensures even distribution of seeds and fertilizers across the treated area. This is crucial for achieving uniform growth and maximizing the effectiveness of inputs. The finely tuned spread pattern also reduces waste and ensures that materials are used economically.

Another innovative feature of these models is their user-friendly design. They come equipped with adjustable settings that allow operators to easily control the flow rate of the materials being spread. This feature is particularly beneficial for tasks that require precision, such as overseeding or applying specific fertilizers.

Both models are designed for versatility, capable of tackling various landscaping tasks. Whether you're preparing a new lawn, refreshing a garden bed, or maintaining a sports field, the OS1548 and OS1572 deliver exceptional results.

In conclusion, the Land Pride OS1548 and OS1572 are exceptional implements that combine strength, efficiency, and user-friendly features. With their robust construction, high capacity, and precise broadcasting system, they are ideal for anyone looking to enhance their landscaping capabilities. These models exemplify Land Pride's commitment to quality and innovation in turf management equipment.