Land Pride OS1548 Use Safety Lights and Devices, Transport Machinery Safely, Use a Safety Chain

Page 4

Table of Contents

Important Safety Information

Land Pride

These are common practices that may or may not be applicable to the products described in this manual.

Use Safety

Lights and Devices

Slow moving tractors, self- propelled equipment, and towed implements can create a hazard when driven on public roads. They are difficult to see, especially at night.

Flashing warning lights and turn signals are recommended whenever driving on public roads.

Transport

Machinery Safely

Comply with state and local laws.

Maximum transport speed for implement is 20 mph. DO NOT EXCEED. Never travel at a speed which does not allow adequate control of steering and stopping. Some rough terrain require a slower speed.

Sudden braking can cause a towed load to swerve and upset. Reduce speed if towed load is not equipped with brakes.

Use the following maximum speed - tow load weight ratios as a guideline:

20 mph when weight is less than or equal to the weight of tractor.

10 mph when weight is double the weight of tractor.

IMPORTANT: Do not tow a load that is more than double the weight of tractor.

Use A Safety Chain

A safety chain will help control drawn machinery should it separate from the tractor drawbar.

Use a chain with the strength rating equal to or greater than the gross weight of the towed machinery.

Attach the chain to the tractor drawbar support or other specified anchor location. Allow only enough slack in the chain to permit turning.

Do not use safety chain for towing.

Practice Safe Maintenance

Understand procedure before doing work. Use proper tools and equipment, refer to Operator’s Manual for additional information.

Work in a clean dry area.

Lower the implement to the ground, put tractor in park, turn off engine, and remove key before performing maintenance.

Allow implement to cool completely.

Do not grease or oil implement while it is in operation.

Inspect all parts. Make sure parts are in good condition & installed properly.

Remove buildup of grease, oil or debris.

Remove all tools and unused parts from implement before operation.

2

OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M

2-16/09

Image 4
Contents Overseeder S/N 166724+ Table of Contents Safety at All Times Use Safety Lights and Devices Use a Safety ChainPractice Safe Maintenance Transport Machinery SafelyPrepare for Emergencies Wear Protective EquipmentKeep Riders Off Machinery Avoid High Pressure Fluids Hazard818-552C 818-055C818-540C 818-129C 818-130C 818-132C 818-543C 818-858C838-111C Application Using This ManualOwner Assistance Land Pride Service Department East North Street Further AssistancePre-Assembly Checklist Tractor RequirementsSling Brackets Torque RequirementsGauge Wheel Drive Disassembly Bearing Mount Plate & Rotor Assembly RH SideRotor to Overseeder Assembly RH Side Rotor to Overseeder Installation-Left Hand SideGauge Wheel Drive Rear Roller AssemblyRear Roller Drive Driveline Installation Check Driveline Minimum LengthLong Arm Chain Guard Location Maximum PTO driveline Movement During OperationCheck Driveline Maximum Length PTO Driveline ShorteningOperating Checklist Operating Check ListTractor Hook-Up CheckTransporting Filling the Seed Box General Notes for Field Operations How the Seeder WorksParking General Operating Instructions Seeding Adjustments Number of Gauge Wheel & Rear Roller RotationsGauge wheel drive units Raise and support Coverage= 1000 Sq. Ft Acre Model No Wheel RollerGauge Wheel Drive Rear Roller DriveDrive Sprocket Alignments Drive Sprocket ArrangementsFescue Fine Blade, Turf Type Pounds per Acre Seed Rate Charts EnglishFescue Fine Blade, Turf Type Pounds per 1000 Square Feet Small Seeds Attachment Seed Rate Chart Seed Rate Charts Metric Fescue Fine Blade, Turf Type Kilograms per HectareLovegrass Sand Kilograms per 1000 Square Meters Gauge Wheel Drive Rotary Cutting Depth AdjustmentRear Roller Drive Floating Top Link Adjustment Front Roller TurnbuckleRear Roller Drive w/Front Roller Floating Top LinkRear Arm Length Adjustment To adjust height of tinesTo adjust angle of tines Tine Attachment OptionalFeed Cup Drive System Adjustment Rotor Drive Chain AdjustmentSlit Seeder Adjustment Rotor Drive Chain AdjustmentSmall Seeds Drive Adjustment Small Seeds Attachment OptionalOS1548 228 OS1572 16111667 Cup Setting Small Seeds Seed Rate Chart EnglishPounds per 1000 square foot and Pounds per acre Maintenance Individual Knife ReplacementRotor Maintenance StorageRight Hand Rotor Disassembly Left Hand Rotor DisassemblyOverseeders With Rear Roller Drive Refer to Figure Rear Roller Drive DisconnectRear Roller Maintenance Rear Roller DisassemblyRear Roller Assembly Rear Roller InspectionClutch Disassembly, Inspection & Assembly Driveline Slip ClutchesType a Clutches Clutch Run-In Type C Clutch Run-InOS1548 2-Plate Disassembly Step OS1548 2-Plate Assembly StepOS1572 4-Plate Disassembly Step OS1572 4-Plate Assembly StepDisassembly and Assembly Type B Clutch AssemblyType B Clutch Clutch Run-In Hex Head Socket BoltsHours Lubrication PointsSeasonally Rear Roller Bearings Feed Cup Drive SprocketFeed Cup Drive Chains Agitator Drive ChainRequired GearboxDriveline Chaincase Drive Sprocket Hanger BearingSlit Seeder Attachment Rear Tine AttachmentSlit Seeder Attachment Rear Tine AttachmentFront Roller Attachment Adjustments, onFront Roller Attachment Small Seeds Attachment Adjustments, on Lubrication, on Troubleshooting, onLand Pride Overseeder Size Drive System OS1548 OS1572 OS1548 & OS1572 SeriesOptional Add-on Equipment 26728 Features Benefits OS15 Series OverseedersTroubleshooting Chart Problem SolutionTire Inflation Chart Torque Values ChartAdditional Torque Values Warranty Overall Unit and Driveline One year Parts and LaborCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

OS1572, OS1548 specifications

The Land Pride OS1548 and OS1572 are outstanding implements designed to enhance the efficiency and productivity of landscape and turf maintenance. These models are part of Land Pride's lineup of high-quality equipment, built for durability and performance.

One of the main features of the OS1548 and OS1572 is their robust construction. Each model is meticulously crafted using high-strength steel, which gives them a solid framework that can withstand rigorous daily use. This durability is complemented by high-quality welds and a corrosion-resistant finish, ensuring that these implements will serve users well over the years, even in challenging environments.

Both models are equipped with a high-capacity hopper that makes them suitable for all types of seed and fertilizer applications. The OS1548 has a 48-inch working width, while the OS1572 boasts a larger 72-inch width. This variety allows operators to choose a model that best fits their specific needs, whether for residential or commercial use. The ample hopper capacity allows for extended work periods without constant refilling, maximizing efficiency and minimizing downtime.

The OS1548 and OS1572 come with a unique broadcasting system that ensures even distribution of seeds and fertilizers across the treated area. This is crucial for achieving uniform growth and maximizing the effectiveness of inputs. The finely tuned spread pattern also reduces waste and ensures that materials are used economically.

Another innovative feature of these models is their user-friendly design. They come equipped with adjustable settings that allow operators to easily control the flow rate of the materials being spread. This feature is particularly beneficial for tasks that require precision, such as overseeding or applying specific fertilizers.

Both models are designed for versatility, capable of tackling various landscaping tasks. Whether you're preparing a new lawn, refreshing a garden bed, or maintaining a sports field, the OS1548 and OS1572 deliver exceptional results.

In conclusion, the Land Pride OS1548 and OS1572 are exceptional implements that combine strength, efficiency, and user-friendly features. With their robust construction, high capacity, and precise broadcasting system, they are ideal for anyone looking to enhance their landscaping capabilities. These models exemplify Land Pride's commitment to quality and innovation in turf management equipment.