Land Pride OS1548, OS1572 Rotary Cutting Depth Adjustment, Gauge Wheel Drive, Rear Roller Drive

Page 26

Table of Contents

Section 3: Adjustments

Land Pride

Rotary Cutting Depth Adjustment

There are three options for setting your cutting depth. They are gauge wheel drive, rear roller drive and rear roller drive with front roller. The option you use is determined by your Overseeder drive type.

Gauge Wheel Drive

!WARNING

Before making adjustments on the Overseeder, shut off tractor, disengage PTO, wait for all moving parts to stop and lock brakes before dismounting tractor. Be sure Overseeder is securely supported on safe supporting stands.

NOTE: The cutting depth of the knives is set by adjusting the height of the gauge wheels.

Refer to Figure 3-4:

1.Start by adjusting the left hand gauge wheel first. Loosen the jam nut (#1) and back it off.

10517

Left Hand Gauge Wheel

Figure 3-4

2.Rotate turnbuckle (#2) to shorten or lengthen it to achieve proper depth, dimension (A).

3.Retighten jam nut (#1) to lock turnbuckle in place.

Refer to Figure 3-5:

4.Adjust right hand gauge wheel next. Lower Overseeder to the ground and support the right gauge wheel tire with a block beneath it, thus causing the spring loaded gauge wheel link to bottom out.

5.Loosen jam nut (#3) and back it off.

6.Turn adjuster nut (#4) to shorten or lengthen spring loaded link (#5).

7.Dimension (B) should be the same on both right and left hand gauge wheels to achieve the same cutting depth (A) at both ends of the Overseeder.

8.Adjust 3-point top center link at the tractor to re-level the Overseeder.

NOTE: Dimension (B) on the right hand gauge wheel can only be checked when the stop washer (#6) is bottomed on the spring tube (#7) as shown.

Rear Roller Drive

Refer to Figure 3-6:

NOTE: The cutting depth of the knives is set by raising or lowering the tractor’s lower 3-point arms.

1.Raise or lower the lower arms on the tractor 3-point hitch until the desired cutting depth is obtained.

2.Adjust rigid links as necessary by loosening jam nuts (#1) and turning the turnbuckles (#2) to get a firm pressing action on the packer wheels.

3.Retighten jam nuts making sure that dimension (A) is equal in both sides.

11662

Right Hand Gauge Wheel

Figure 3-5

10472

Rear Roller Drive Without Front Roller

Figure 3-6

24 OS1548 and OS1572 Overseeder (S/N 166724+) 308-303M

2-16/09

Image 26
Contents Overseeder S/N 166724+ Table of Contents Safety at All Times Practice Safe Maintenance Use Safety Lights and DevicesUse a Safety Chain Transport Machinery SafelyKeep Riders Off Machinery Prepare for EmergenciesWear Protective Equipment Avoid High Pressure Fluids Hazard818-540C 818-055C818-552C 818-129C 818-130C 818-132C 838-111C 818-858C818-543C Owner Assistance Using This ManualApplication Land Pride Service Department East North Street Further AssistanceSling Brackets Pre-Assembly ChecklistTractor Requirements Torque RequirementsRotor to Overseeder Assembly RH Side Gauge Wheel Drive DisassemblyBearing Mount Plate & Rotor Assembly RH Side Rotor to Overseeder Installation-Left Hand SideRear Roller Drive Rear Roller AssemblyGauge Wheel Drive Long Arm Chain Guard Location Driveline InstallationCheck Driveline Minimum Length Maximum PTO driveline Movement During OperationCheck Driveline Maximum Length PTO Driveline ShorteningTractor Hook-Up Operating ChecklistOperating Check List CheckTransporting Filling the Seed Box Parking How the Seeder WorksGeneral Notes for Field Operations General Operating Instructions Gauge wheel drive units Raise and support Seeding AdjustmentsNumber of Gauge Wheel & Rear Roller Rotations Coverage= 1000 Sq. Ft Acre Model No Wheel RollerDrive Sprocket Alignments Gauge Wheel DriveRear Roller Drive Drive Sprocket ArrangementsFescue Fine Blade, Turf Type Pounds per 1000 Square Feet Seed Rate Charts EnglishFescue Fine Blade, Turf Type Pounds per Acre Small Seeds Attachment Seed Rate Chart Seed Rate Charts Metric Fescue Fine Blade, Turf Type Kilograms per HectareLovegrass Sand Kilograms per 1000 Square Meters Rear Roller Drive Rotary Cutting Depth AdjustmentGauge Wheel Drive Rear Roller Drive w/Front Roller Floating Top Link AdjustmentFront Roller Turnbuckle Floating Top LinkTo adjust angle of tines Rear Arm Length AdjustmentTo adjust height of tines Tine Attachment OptionalSlit Seeder Adjustment Feed Cup Drive System AdjustmentRotor Drive Chain Adjustment Rotor Drive Chain AdjustmentOS1548 228 Small Seeds Drive AdjustmentSmall Seeds Attachment Optional OS1572 16111667 Pounds per 1000 square foot and Pounds per acre Small Seeds Seed Rate Chart EnglishCup Setting Rotor Maintenance MaintenanceIndividual Knife Replacement StorageOverseeders With Rear Roller Drive Refer to Figure Right Hand Rotor DisassemblyLeft Hand Rotor Disassembly Rear Roller Drive DisconnectRear Roller Assembly Rear Roller MaintenanceRear Roller Disassembly Rear Roller InspectionType a Clutches Clutch Run-In Clutch Disassembly, Inspection & AssemblyDriveline Slip Clutches Type C Clutch Run-InOS1548 2-Plate Disassembly Step OS1548 2-Plate Assembly StepOS1572 4-Plate Disassembly Step OS1572 4-Plate Assembly StepType B Clutch Clutch Run-In Disassembly and AssemblyType B Clutch Assembly Hex Head Socket BoltsSeasonally Lubrication PointsHours Feed Cup Drive Chains Rear Roller BearingsFeed Cup Drive Sprocket Agitator Drive ChainDriveline Chaincase RequiredGearbox Drive Sprocket Hanger BearingSlit Seeder Attachment Slit Seeder AttachmentRear Tine Attachment Rear Tine AttachmentFront Roller Attachment Adjustments, onFront Roller Attachment Land Pride Overseeder Size Drive System Adjustments, on Lubrication, on Troubleshooting, onSmall Seeds Attachment Optional Add-on Equipment OS1548 & OS1572 SeriesOS1548 OS1572 26728 Features Benefits OS15 Series OverseedersTroubleshooting Chart Problem SolutionAdditional Torque Values Torque Values ChartTire Inflation Chart Warranty Overall Unit and Driveline One year Parts and LaborCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

OS1572, OS1548 specifications

The Land Pride OS1548 and OS1572 are outstanding implements designed to enhance the efficiency and productivity of landscape and turf maintenance. These models are part of Land Pride's lineup of high-quality equipment, built for durability and performance.

One of the main features of the OS1548 and OS1572 is their robust construction. Each model is meticulously crafted using high-strength steel, which gives them a solid framework that can withstand rigorous daily use. This durability is complemented by high-quality welds and a corrosion-resistant finish, ensuring that these implements will serve users well over the years, even in challenging environments.

Both models are equipped with a high-capacity hopper that makes them suitable for all types of seed and fertilizer applications. The OS1548 has a 48-inch working width, while the OS1572 boasts a larger 72-inch width. This variety allows operators to choose a model that best fits their specific needs, whether for residential or commercial use. The ample hopper capacity allows for extended work periods without constant refilling, maximizing efficiency and minimizing downtime.

The OS1548 and OS1572 come with a unique broadcasting system that ensures even distribution of seeds and fertilizers across the treated area. This is crucial for achieving uniform growth and maximizing the effectiveness of inputs. The finely tuned spread pattern also reduces waste and ensures that materials are used economically.

Another innovative feature of these models is their user-friendly design. They come equipped with adjustable settings that allow operators to easily control the flow rate of the materials being spread. This feature is particularly beneficial for tasks that require precision, such as overseeding or applying specific fertilizers.

Both models are designed for versatility, capable of tackling various landscaping tasks. Whether you're preparing a new lawn, refreshing a garden bed, or maintaining a sports field, the OS1548 and OS1572 deliver exceptional results.

In conclusion, the Land Pride OS1548 and OS1572 are exceptional implements that combine strength, efficiency, and user-friendly features. With their robust construction, high capacity, and precise broadcasting system, they are ideal for anyone looking to enhance their landscaping capabilities. These models exemplify Land Pride's commitment to quality and innovation in turf management equipment.