Land Pride APS1586 Mud Scraper Installation Optional, Land Pride Mud Scrapers, Front Mud Scrapers

Page 10

Table of Contents

Section 1: Assembly & Set-up

Land Pride

Mud Scraper Installation (Optional)

Optional mud scrapers are available from your local Land Pride dealer. A scraper bundle consists of one rear roller scraper and two front roller scrapers and are identified by the rear roller type and seeder planting width.

 

Land Pride Mud Scrapers

Part No.

Part Description

 

 

APS1548

 

313-431A

SPIKE SCRAPER BUNDLE . . . S/N 567003+

313-432A

PACKER SCRAPER BUNDLE . S/N 567003+

APS1560

 

313-458A

SPIKE SCRAPER BUNDLE

313-459A

PACKER SCRAPER BUNDLE

APS1572

 

313-429A

SPIKE SCRAPER BUNDLE. . . . S/N 547969+

313-430A

PACKER SCRAPER BUNDLE . . S/N 547969+

APS1586

 

313-449A

SPIKE SCRAPER BUNDLE

313-453A

PACKER SCRAPER BUNDLE

 

 

Refer to “Torque Values Chart For Common Bolt Size” on page 28 when tightening hardware.

Front Mud Scrapers

Refer to Figure 1-4:

IMPORTANT: Some units will not accept a Mud Scraper attachment. Please be sure of your serial number to verify.

NOTE: Do not tighten bolts (#4 & #5) until after adjustments have been made. See “Mud Scraper Adjustment (Optional)” on page 14 for instructions.

1.Attach spike scrapers (#3) to scraper hangers (#2) with 3/8"-16 x 1 1/4" GR5 round head square neck bolts (#5) and hex flange lock nuts (#6). Draw nuts up snug, do not tighten until after completing adjustments in Section 3.

2.Attach scraper hangers (#2) to the front rollers with four 3/8"-16 x 1" GR5 hex head cap screws (#4), 3/8" lock washers (#8) and 3/8" flat washers (#7). Draw nuts up snug, do not tighten until after completing adjustments in Section 3.

Rear Mud Scraper

Refer to Figure 1-5 on page 9:

The instructions below apply to both the rear packer roller and rear spike roller.

1.Lower rear roller to ground level to compress spring (#6). Adjust 3-point lift height to make sure roller arm (#1) is positioned so that there is space between the arm and stop blocks located above and below the arm.

2.Support seeder frame at this height to keep seeder frame from creeping lower during assembly.

3.Shut tractor engine off and engage parking brake.

4.Attach vice grips tightly to the spring rod and tight against the spring rod guide bar to retain spring compression.

5.Loosen bearing set collar screw (#2) and remove lock nut (#3), cap screws (#4) and lock washers (#5). Keep hardware for reuse.

 

vel

 

ra

 

DirectionT

 

of

Left Hand Roller

Right hand Roller

 

25607

Front Mud Scraper Installation

Figure 1-4

8

APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder 313-354M

5/13/08

Page 9 Page 11
Image 10
Page 9 Page 11
Contents APS1586 24932 APS1548Table of Contents Safety at All Times Practice Safe Maintenance Use a Safety ChainTransport Machinery Safely Avoid High Pressure Fluids Hazard Tire SafetyWear Protective Equipment Keep Riders Off MachinerySafety Labels 838-111C 818-543C 818-254COwner Assistance Using This ManualApplication IntroductionTractor Requirements Pre-Assembly ChecklistAssembly & Set-up Sling BracketFront Mud Scrapers Mud Scraper Installation OptionalLand Pride Mud Scrapers Rear Mud ScraperRear Mud Scraper Installation to Packer Roller Roller Arm Disassembly PositionSpecial Instructions For Packer Roller Rear Mud Scraper Installation to Spike Roller Special Instructions For Spike RollerTractor Hook-up Operating Check ListTransporting Filling the Seed BoxOperating the Seeder How the Seeder WorksSeed Box With Lid Open Parking the Seeder General Operating InstructionsAdjustments Front Roller Angle AdjustmentMud Scraper Adjustment Optional Rear Mud ScrapersDrive Chain Engagement Disengage Drive ChainLow Range Set-up Speed Change SprocketHigh Range Set-up 35T SprocketSeeding Adjustments Model Rear Roller Rotations to Cover 1000 Sq. Ft AcreFescue Fine Blade, Turf Type Pounds per Acre Seed Rate Charts EnglishFescue Fine Blade, Turf Type Pounds per 1000 Square Feet Rye Grass Perennial Pounds per Acre Lovegrass Sand Pounds per AcreRye Grass Annual Pounds per Acre Wheatgrass Crested Pounds per AcreSeed Rate Charts Metric Fescue Fine Blade, Turf Type Kilograms per HectareLovegrass Weeping Kilograms per 1000 Square Meters Maintenance & Lubrication MaintenanceCleaning and Storing Roller ChainsLand PrideTable of Contents Rear Roller Bearings RequiredRoller Chains APS1548 & APS1572 All Purpose Seeder Specifications & CapacitiesDescription APS1548 APS1560 APS1572 APS1586 Features Benefits Features and BenefitsAPS1548, APS1560, APS1572 & APS1586 Models Troubleshooting Chart TroubleshootingProblem Cause Additional Torque Values Torque Values Chart For Common Bolt SizeAppendix In-tpiWarranty Front & Rear Rollers Considered wear itemsCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

APS1548, APS1586, APS1572, APS1560 specifications

Land Pride, a well-known name in agricultural and landscape equipment, offers a range of premium tillers designed to enhance productivity and performance in various farming and landscaping applications. Among their impressive lineup, the APS1548, APS1586, APS1560, and APS1572 models stand out due to their robust features and user-friendly technologies.

The APS1548, with a width of 48 inches, is an ideal choice for smaller gardens or compact tractors. It provides exceptional performance in tilling and soil preparation, helping to create a fertile foundation for planting. Equipped with heavy-duty tines, the APS1548 ensures efficient soil penetration, breaking up tough ground and turning it over with ease.

Moving up in size, the APS1560 boasts a working width of 60 inches, making it suitable for medium-sized tractors and larger areas. It offers similar heavy-duty construction, with reinforced tines capable of handling various soil types. The APS1560 is designed for precision and reliability, ensuring that your planting beds are thoroughly prepared for optimal crop growth.

The APS1572 takes it a step further with its 72-inch wide working area, ideal for larger fields and more intensive farming operations. Its increased coverage means less time spent tilling and more efficient operation. This model excels in durability, featuring a robust frame and high-quality components that ensure longevity, even under tough working conditions.

The APS1586, at 86 inches wide, is targeted towards large-scale farmers and landscapers who demand high efficiency. This model can cover extensive areas quickly and effectively, making it a perfect choice for commercial operations. It integrates advanced technologies, such as quick-hitch compatibility, allowing for easy attachment and detachment to maximize productivity.

All models feature adjustable tilling depths, enabling users to tailor their operation to specific soil conditions. Additionally, the tines can be easily replaced, providing extended service life and reducing maintenance costs. Land Pride’s commitment to quality is evident in the construction of these tillers, ensuring they withstand the rigors of daily use while providing consistent performance.

In summary, the Land Pride APS series—comprising the APS1548, APS1586, APS1560, and APS1572—represents a strong lineup of tillers that cater to a variety of agricultural needs. Their robust construction, user-friendly design, and thoughtful features make them a valuable investment for farmers and landscapers seeking to improve their productivity and soil health.
Top Page Image Contents