Land Pride APS1548 manual Special Instructions For Packer Roller, Roller Arm Disassembly Position

Page 11

Land Pride

Table of Contents

Section 1: Assembly & Set-up

24977

Attach a vice grip tightly to

Spring Rod

 

the spring rod at this location.

 

5

Spring Rod

Guide Bar

 

6

 

1

3

2

 

4

Important: Make sure there is space between the roller arm (#1) and stop blocks above and below the arm and that the arm is not tight against a stop block before attaching a vice grip to the spring rod.

Roller Arm Disassembly Position

Figure 1-5

Refer to Figure 1-6 below & Figure 1-7 on page 10:

6.Pull roller arm assembly (#1) away from rear roller end plate and insert two 1/2"-13 x 1 1/2" GR5 hex cap screws (#12) from the inside as shown.

7.Reinstall roller arm assembly (#1) to the seeder side plate with existing 3/4"-10 hex flange lock

nut (#3), 5/8"-11 GR5 hex head cap screws (#4) and lock washers (#5). Torque all hardware including bearing set collar screw (#2).

8.Remove vice grip from spring rod.

9.Attach left hand scraper mount (#10) to the left side roller arm (#1) with hex flange lock nuts (#14). Tighten lock nuts (#14) to the correct torque.

Special Instructions For Packer Roller

Refer to Figure 1-6:

NOTE: Do not tighten bolts (#16) until after adjustments have been made. See “Mud Scraper Adjustment (Optional)” on page 14 for instructions.

1.Attach rear roller scraper (#9) to chain guard mount (#7) with two 3/8"-16 x 1 1/4" GR5 hex head cap screws (#11), 3/8" flat washers (#15), 3/8" lock washers (#16) and hex nuts (#13). Draw nuts up snug, do not tighten until after completing adjustments in Section 3.

2.Attach opposite end to scraper mount (#10) with two 3/8"-16 x 1 1/4" GR5 hex head cap screws (#11), 3/8" flat washers (#15), 3/8" lock washers (#16) and hex nuts (#13). Draw nuts up snug, do not tighten until after completing adjustments in Section 3.

25605

Rear Mud Scraper Installation to Packer Roller

Figure 1-6

5/13/08

APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder 313-354M

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 24932 APS1548 APS1586Table of Contents Safety at All Times Transport Machinery Safely Use a Safety ChainPractice Safe Maintenance Keep Riders Off Machinery Tire SafetyWear Protective Equipment Avoid High Pressure Fluids HazardSafety Labels 818-254C 838-111C 818-543CIntroduction Using This ManualApplication Owner AssistanceSling Bracket Pre-Assembly ChecklistAssembly & Set-up Tractor RequirementsRear Mud Scraper Mud Scraper Installation OptionalLand Pride Mud Scrapers Front Mud ScrapersSpecial Instructions For Packer Roller Roller Arm Disassembly PositionRear Mud Scraper Installation to Packer Roller Special Instructions For Spike Roller Rear Mud Scraper Installation to Spike RollerFilling the Seed Box Operating Check ListTransporting Tractor Hook-upSeed Box With Lid Open How the Seeder WorksOperating the Seeder General Operating Instructions Parking the SeederRear Mud Scrapers Front Roller Angle AdjustmentMud Scraper Adjustment Optional AdjustmentsDisengage Drive Chain Drive Chain Engagement35T Sprocket Speed Change SprocketHigh Range Set-up Low Range Set-upModel Rear Roller Rotations to Cover 1000 Sq. Ft Acre Seeding AdjustmentsFescue Fine Blade, Turf Type Pounds per 1000 Square Feet Seed Rate Charts EnglishFescue Fine Blade, Turf Type Pounds per Acre Wheatgrass Crested Pounds per Acre Lovegrass Sand Pounds per AcreRye Grass Annual Pounds per Acre Rye Grass Perennial Pounds per AcreFescue Fine Blade, Turf Type Kilograms per Hectare Seed Rate Charts MetricLovegrass Weeping Kilograms per 1000 Square Meters Roller Chains MaintenanceCleaning and Storing Maintenance & LubricationLand PrideTable of Contents Roller Chains RequiredRear Roller Bearings Description APS1548 APS1560 APS1572 APS1586 Specifications & CapacitiesAPS1548 & APS1572 All Purpose Seeder APS1548, APS1560, APS1572 & APS1586 Models Features and BenefitsFeatures Benefits Problem Cause TroubleshootingTroubleshooting Chart In-tpi Torque Values Chart For Common Bolt SizeAppendix Additional Torque ValuesFront & Rear Rollers Considered wear items WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

APS1548, APS1586, APS1572, APS1560 specifications

Land Pride, a well-known name in agricultural and landscape equipment, offers a range of premium tillers designed to enhance productivity and performance in various farming and landscaping applications. Among their impressive lineup, the APS1548, APS1586, APS1560, and APS1572 models stand out due to their robust features and user-friendly technologies.

The APS1548, with a width of 48 inches, is an ideal choice for smaller gardens or compact tractors. It provides exceptional performance in tilling and soil preparation, helping to create a fertile foundation for planting. Equipped with heavy-duty tines, the APS1548 ensures efficient soil penetration, breaking up tough ground and turning it over with ease.

Moving up in size, the APS1560 boasts a working width of 60 inches, making it suitable for medium-sized tractors and larger areas. It offers similar heavy-duty construction, with reinforced tines capable of handling various soil types. The APS1560 is designed for precision and reliability, ensuring that your planting beds are thoroughly prepared for optimal crop growth.

The APS1572 takes it a step further with its 72-inch wide working area, ideal for larger fields and more intensive farming operations. Its increased coverage means less time spent tilling and more efficient operation. This model excels in durability, featuring a robust frame and high-quality components that ensure longevity, even under tough working conditions.

The APS1586, at 86 inches wide, is targeted towards large-scale farmers and landscapers who demand high efficiency. This model can cover extensive areas quickly and effectively, making it a perfect choice for commercial operations. It integrates advanced technologies, such as quick-hitch compatibility, allowing for easy attachment and detachment to maximize productivity.

All models feature adjustable tilling depths, enabling users to tailor their operation to specific soil conditions. Additionally, the tines can be easily replaced, providing extended service life and reducing maintenance costs. Land Pride’s commitment to quality is evident in the construction of these tillers, ensuring they withstand the rigors of daily use while providing consistent performance.

In summary, the Land Pride APS series—comprising the APS1548, APS1586, APS1560, and APS1572—represents a strong lineup of tillers that cater to a variety of agricultural needs. Their robust construction, user-friendly design, and thoughtful features make them a valuable investment for farmers and landscapers seeking to improve their productivity and soil health.
Top Page Image Contents