Land Pride Comprehensive Guide for All Purpose Seeder Models: APS1548, APS1572 & APS1586

Page 18

Table of Contents

Section 3: Adjustments

Land Pride

Speed Change Sprocket

The All Purpose Seeder is designed with two drive speeds to accommodate different seed sizes and seed dispersal rates. The two drive speeds are high range (fast speed) and low range (slow speed).

High Range Set-up

Refer to Figure 3-4:

1.Loosen 3/8" flange lock nut(#1) and drive tension sprocket (#2). Remove drive chain (#3) from speed change sprocket (#6).

2.Remove 5/8” nut (#4) and 5/8” flat washer (#5).

3.Pull idler sprocket (#8) away from driven chain (#7) and remove driven chain.

4.Rearrange speed change sprocket (#6) so that the larger 35 tooth sprocket is behind the smaller 19 tooth sprocket as shown.

5.Secure sprocket with 5/8" flat washer (#5) and 5/8" - 11 nut (#4). Tighten nut to correct torque.

6.Drive chain (#3) should be 65 pitches long and driven chain (#7) 101 pitches long. If drive chain has 73 pitches, remove 8 pitches from it and add those 8 pitches to the driven chain.

7.Replace 101 pitch driven chain (#7) first and then the 65 pitch drive chain (#3).

8.Make sure idler sprocket (#8) is pressing against the driven chain.

9.Retention drive chain (#3) by pressing down on idler sprocket (#2). When tensioned properly, tighten 3/8" flange lock nut (#1) to maintain that tension.

Low Range Set-up

Refer to Figure 3-5:

1.Loosen 3/8" flange lock nut(#1) and drive tension sprocket (#2). Remove drive chain (#3) from speed change sprocket (#6).

2.Remove 5/8” nut (#4) and 5/8” flat washer (#5).

3.Pull idler sprocket (#8) away from driven chain (#7) and remove driven chain.

4.Rearrange speed change sprocket (#6) so that the larger 35 tooth sprocket is in front of the smaller 19 tooth sprocket as shown.

5.Secure sprocket with 5/8" flat washer (#5) and 5/8" - 11 nut (#4). Tighten nut to correct torque.

6.Drive chain (#3) should be 73 pitches long and driven chain (#7) 92 pitches long. If driven chain has 101 pitches, remove 8 pitches from it and add those 8 pitches to the drive chain.

7.Replace 93 pitch driven chain (#7) first and then the 73 pitch drive chain (#3).

8.Make sure idler sprocket (#8) is pressing against the driven chain.

9.Retention drive chain (#3) by pressing down on idler sprocket (#2). When tensioned properly, tighten 3/8" flange lock nut (#1) to maintain that tension.

No. 40 Chain

 

 

 

 

92 + 8 + Offset Link

 

 

 

 

= 101 Chain Pitches

 

 

 

 

7

 

35T Sprocket

 

 

Located Behind

 

 

19T Sprocket

8

 

6

 

 

 

 

 

 

2

 

 

 

 

 

 

4

5

 

1

3

No. 40 Chain

 

 

64 + Offset Link

 

 

 

 

= 65 Chain Pitches

24936

 

 

 

 

High Range Sprocket Arrangement & Chain Pitches

 

Figure 3-4

 

 

No. 40 Chain

7

 

 

 

92 + Offset Link

 

 

 

 

 

 

 

= 93 Chain Pitches

 

35T Sprocket

 

 

 

 

In Front Of

 

 

 

19T Sprocket

8

 

 

6

 

 

 

 

 

2

 

 

 

 

 

 

4

5

 

 

3

No. 40 Chain

 

 

1

 

64 + 8 + Offset Link

 

 

 

= 73 Chain Pitches

24935

Low Range Speed Change & Chain Pitches

Figure 3-5

16 APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder 313-354M

5/13/08

Image 18
Contents APS1586 24932 APS1548Table of Contents Safety at All Times Use a Safety Chain Practice Safe MaintenanceTransport Machinery Safely Avoid High Pressure Fluids Hazard Tire SafetyWear Protective Equipment Keep Riders Off MachinerySafety Labels 838-111C 818-543C 818-254COwner Assistance Using This ManualApplication IntroductionTractor Requirements Pre-Assembly ChecklistAssembly & Set-up Sling BracketFront Mud Scrapers Mud Scraper Installation OptionalLand Pride Mud Scrapers Rear Mud ScraperRoller Arm Disassembly Position Rear Mud Scraper Installation to Packer RollerSpecial Instructions For Packer Roller Rear Mud Scraper Installation to Spike Roller Special Instructions For Spike RollerTractor Hook-up Operating Check ListTransporting Filling the Seed BoxHow the Seeder Works Operating the SeederSeed Box With Lid Open Parking the Seeder General Operating InstructionsAdjustments Front Roller Angle AdjustmentMud Scraper Adjustment Optional Rear Mud ScrapersDrive Chain Engagement Disengage Drive ChainLow Range Set-up Speed Change SprocketHigh Range Set-up 35T SprocketSeeding Adjustments Model Rear Roller Rotations to Cover 1000 Sq. Ft AcreSeed Rate Charts English Fescue Fine Blade, Turf Type Pounds per AcreFescue Fine Blade, Turf Type Pounds per 1000 Square Feet Rye Grass Perennial Pounds per Acre Lovegrass Sand Pounds per AcreRye Grass Annual Pounds per Acre Wheatgrass Crested Pounds per AcreSeed Rate Charts Metric Fescue Fine Blade, Turf Type Kilograms per HectareLovegrass Weeping Kilograms per 1000 Square Meters Maintenance & Lubrication MaintenanceCleaning and Storing Roller ChainsLand PrideTable of Contents Required Rear Roller BearingsRoller Chains Specifications & Capacities APS1548 & APS1572 All Purpose SeederDescription APS1548 APS1560 APS1572 APS1586 Features and Benefits Features BenefitsAPS1548, APS1560, APS1572 & APS1586 Models Troubleshooting Troubleshooting ChartProblem Cause Additional Torque Values Torque Values Chart For Common Bolt SizeAppendix In-tpiWarranty Front & Rear Rollers Considered wear itemsCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

APS1548, APS1586, APS1572, APS1560 specifications

Land Pride, a well-known name in agricultural and landscape equipment, offers a range of premium tillers designed to enhance productivity and performance in various farming and landscaping applications. Among their impressive lineup, the APS1548, APS1586, APS1560, and APS1572 models stand out due to their robust features and user-friendly technologies.

The APS1548, with a width of 48 inches, is an ideal choice for smaller gardens or compact tractors. It provides exceptional performance in tilling and soil preparation, helping to create a fertile foundation for planting. Equipped with heavy-duty tines, the APS1548 ensures efficient soil penetration, breaking up tough ground and turning it over with ease.

Moving up in size, the APS1560 boasts a working width of 60 inches, making it suitable for medium-sized tractors and larger areas. It offers similar heavy-duty construction, with reinforced tines capable of handling various soil types. The APS1560 is designed for precision and reliability, ensuring that your planting beds are thoroughly prepared for optimal crop growth.

The APS1572 takes it a step further with its 72-inch wide working area, ideal for larger fields and more intensive farming operations. Its increased coverage means less time spent tilling and more efficient operation. This model excels in durability, featuring a robust frame and high-quality components that ensure longevity, even under tough working conditions.

The APS1586, at 86 inches wide, is targeted towards large-scale farmers and landscapers who demand high efficiency. This model can cover extensive areas quickly and effectively, making it a perfect choice for commercial operations. It integrates advanced technologies, such as quick-hitch compatibility, allowing for easy attachment and detachment to maximize productivity.

All models feature adjustable tilling depths, enabling users to tailor their operation to specific soil conditions. Additionally, the tines can be easily replaced, providing extended service life and reducing maintenance costs. Land Pride’s commitment to quality is evident in the construction of these tillers, ensuring they withstand the rigors of daily use while providing consistent performance.

In summary, the Land Pride APS series—comprising the APS1548, APS1586, APS1560, and APS1572—represents a strong lineup of tillers that cater to a variety of agricultural needs. Their robust construction, user-friendly design, and thoughtful features make them a valuable investment for farmers and landscapers seeking to improve their productivity and soil health.