Land Pride 322-215M manual Safety at All Times

Page 3

Land Pride

Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Make sure all guards and shields

are in place and secured before

operating the implement.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not stand between the tractor

and implement during hitching.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

working area.

▲ Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

For Your Protection

Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

Lower machine to ground, put tractor in park, turn off engine, and remove the key.

Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

2/23/09

Model SBR48, SBR60 & SBR72 Seed Bed Roller 322-215M

1

Image 3
Contents With Pull Hitch Option Without Pull Hitch OptionTable of Contents Safety at All Times Use a Safety Chain Practice Safe MaintenanceTransport Machinery Safely Keep Riders Off Machinery Tire SafetyWear Protective Equipment Avoid High Pressure Fluids Hazard848-148C Safety LabelsUsing This Manual ApplicationOwner Assistance Further Assistance Land Pride Service Department East North StreetPull Type Hook-Up Three Point Hitch AssemblyTractor Requirements Three-Point Hook-upRoller Scraper Assembly Pull Type Hitch Assembly OptionalRefer to -5 & Figure Point Hook-UpPull-type Hook-up Clevis Hook-upBall Hook-up Ball Hitch Swivel Adjustment Scraper Bar AdjustmentOperating Checklist Operating Check ListTransporting Field Position to Transport Position Hitch weight when unhookingOperating Instructions Point TypePull Type Unhooking the Seed Bed RollerStorage Instructions Point TypeGeneral Operating Instructions Roller Flange Bearings MaintenanceLubrication HoursElectric Spin Spreader Additional Seeding EquipmentDrag Harrow Disc HarrowComplete One Pass Seeding Application Description Three-Point Pull-Type SBR SeriesFeatures Benefits Features and Benefits· m Ft-lb Mm x pitch Torque Values Chart For Common Bolt SizeAdditional Torque Values In-tpiTable of Contents Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA