Boston Acoustics SoundWare Sub Operation, Control Adjustments, Initial Control Settings

Page 7

Operation

After you have made all the system connections, turn on the power switch of the SoundWare Sub. Note the Status LED to the left of the Crossover control. When the Sub is connected to a power outlet it will light red to indicate Standby status, or green to indicate the amplifier is on.

The SoundWare Sub amplifier has a “signal sensing” circuit. When the Line In(put) receives an audio signal the amplifier turns itself on. If there is no audio signal input the amplifier goes into Standby mode after a few minutes. So all you need to do is provide power and an audio signal. The Sub takes care of the rest.

Control Adjustments

The subwoofer crossover frequency and volume level, need to be set to achieve a smooth and balanced main speaker-to- subwoofer transition. The crossover frequency and subwoofer volume adjustments may be done by the system electronics (in systems that have home theatre receivers or sound processors) or by using the SoundWare Sub controls. The SoundWare Sub Polarity control also affects the acoustical transition, but often in a more subtle way. After the basic controls settings are done, the final adjustments should be made while listening carefully to the system. The controls are somewhat interactive. After making the first set of adjustments, use the system for while with a variety of audio sources. Then go through the adjustment sequence again to see if further improvements can be made.

Initial Control Settings

Using either the system electronics or the SoundWare Sub Crossover control, set the subwoofer crossover frequency about 10 Hz higher than the low frequency limit of the main speakers in the system. If the crossover frequency is set by the system electronics, turn the Sub’s Crossover control all the way up to the 180 Hz position.

Turn the SoundWare Sub Volume control up about half way, around the 12 o’clock position. If the system electronics also has a subwoofer volume control, set it at about the middle of its control range.

Final Adjustments

The best final settings of the subwoofer crossover frequency and volume level controls depends on many factors. The system electronics, speakers locations, your listening location, and the room acoustics all affect which control settings produce the best results. Careful listening and control adjustments are needed.

Choose several sound sources that have a balanced, broad range of sounds – a steady but not predominant bass line, some vocal content, a variety of instruments, some percussion. Listen to the selections and adjust the SoundWare Sub volume control until the bass sound is in balance with the rest of the sound range. Do not set the bass volume too high to achieve “impressive” sound. That will make instruments and voices sound “muddy” or “thick” and over time will become tiresome.

Once you have good main speaker-to-subwoofer balance, listen to the transition range to fine tune the crossover frequency. Low male voices are often good for this evaluation. Listen for certain parts of the lower sound that may seem to stand out. This indicates there is too much overlap between the main speakers and the Sub. Try adjusting the crossover frequency about 10 Hz lower and reevaluate the sound. Conversely, if a part of the lower sound range seems “weak” or “hollow”, try setting the crossover frequency about 10 Hz higher.

While adjusting the crossover frequency also try changing the Polarity switch position. That can make the transition better, or worse, or make relatively little difference. Listen carefully and set this switch to provide the fullest, most dynamic bass. The effect of the Polarity switch will be most audible on low-frequency percussion instruments or music with a continuously repeating bass line.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents SoundWare Sub Important Safety Instructions Boston Acoustics SoundWare Sub SpecificationsFeatures IntroductionPlacement SoundWare Sub ConfigurationUnpacking the System Connections Power ConnectionAny other components to it Audio Signal Input Operation Control AdjustmentsInitial Control Settings Final AdjustmentsFor EU Customers Only Maintenance and ServiceLimited Warranty If Service Seems NecessaryInstrucciones DE Seguridad Importantes SoundWare Sub de Boston Acoustics EspecificacionesIntroducción CaracterísticasDesembalaje del sistema Configuración de SoundWare SubColocación De alta potencia. No use una barra de salidas ConexionesConexión de alimentación De un cable muy reforzado para aplicacionesEntrada de la señal de audio Ajustes finales Configuración de los controles inicialesFuncionamiento Ajustes de los controlesSólo para clientes de la UE Mantenimiento y servicioGarantía Limitada Si cree que necesita servicio técnicoImportanti Istruzioni DI Sicurezza Servirsi unicamente di accessori specificati dal produttoreIntroduzione SpecificheCaratteristiche Disimballaggio del sistema Configurazione SoundWare SubCollocazione Collegamento dellalimentazione ConnessioniPer applicazioni ad elevata potenza. Non Ingresso segnale audio Regolazioni finali FunzionamentoRegolazioni dei comandi Impostazioni iniziali dei comandiClienti UE Manutenzione e serviziGaranzia limitata Caso di necessità di assistenzaWichtige Sicherheitsanweisungen Einleitung SpezifikationenAusstattung Konfiguration des SoundWare Sub Auspacken des SystemsAufstellung Netzanschluss AnschlüsseEingang des Audiosignals Letzte Anpassungen BetriebReglereinstellungen Grundlegende ReglereinstellungenNur für Kunden in der EU Wartung und KundendienstEingeschränkte Garantie Falls ein Kundendienst notwendig erscheintInstructions DE Sécurité Importantes Caractéristiques SpécificationsCaisson de basse SoundWare de Boston Acoustics Déballage du système Configuration du caisson de basse SoundWarePositionnement Branchement électrique BranchementsSil est capable de supporter des niveaux de Entrée du signal audio Réglage final Réglage des commandesRéglage initial des commandes FonctionnementOu veuillez nous contacter par e-mail  Maintenance et service après-venteDemande de service après-vente Garantie limitéeViktiga Säkerhetsanvisningar Denna symbol på enheten indikerar risk för farlig spänningInledning SpecifikationerFunktioner SoundWare Sub-konfiguration Packa upp systemetPlacering Strömanslutning AnslutningarAndra komponenter anslutas till dem Ljudsignalingång Finjusteringar AnvändningKontrolljusteringar Initiala kontrollinställningarEndast för kunder inom EU Underhåll och serviceOm service tycks vara nödvändig Begränsad garantiJubilee Drive, Peabody, MA 01960 USA

SoundWare Sub specifications

The Boston Acoustics SoundWare Sub stands out as a versatile and compact subwoofer designed to enhance your audio experience, particularly in home theater and music systems. This powerful subwoofer combines advanced technology with practical features, making it an ideal addition to any sound setup.

One of the key features of the SoundWare Sub is its innovative design. The subwoofer boasts a unique satellite shape that allows it to blend seamlessly into various environments, whether in a living room or a home theater. Its compact footprint enables placement in tight spaces, making it a flexible option for users with limited room.

At the heart of the SoundWare Sub lies a potent 10-inch down-firing driver, which is responsible for delivering deep and impactful bass. This driver is meticulously engineered to reproduce low frequencies with precision, creating an immersive listening experience that's felt as much as it is heard. Providing a frequency response that extends down to 28 Hz, users can expect rumbling lows that add depth and excitement to music, movies, and gaming.

The subwoofer also features a built-in amplifier designed to optimize performance. With a power rating of 200 watts, the SoundWare Sub is capable of producing high output levels without distortion, ensuring that dynamic ranges are faithfully reproduced. The amplifier's efficiency contributes to the overall sound quality, maintaining clarity even at higher volumes.

Connectivity options are another strong point of the Boston Acoustics SoundWare Sub. It includes both speaker-level and line-level inputs, allowing for compatibility with various audio setups. This makes it easy to integrate the subwoofer into existing systems, whether for a simple stereo setup or a more complex home theater arrangement.

To ensure optimal performance in any room, the SoundWare Sub includes adjustable volume control and a variable crossover frequency. This feature allows users to tailor the bass output to their specific preferences, ensuring a personalized audio experience.

Additionally, the compact design does not compromise on build quality, and the cabinet is constructed from durable materials that minimize resonance and enhance overall sound quality.

In summary, the Boston Acoustics SoundWare Sub offers a blend of compact design, powerful performance, and flexible connectivity that makes it a compelling choice for audiophiles and casual listeners alike. Its ability to deliver deep, rich bass while fitting easily into any space sets it apart as a valuable addition to any audio setup. Whether you're watching the latest blockbuster or enjoying music at home, this subwoofer promises to elevate your audio experience.
Top Page Image Contents