iOptron MiniTower Pro instruction manual Typical Errors

Page 40

The upgrade is complete. Turn your mount power off then on again.

Typical Errors:

1.Invalid Port Number: in Device Manager: make sure you have the correct COM port number for CP210x.

2.Screen is now blank: Wrong “.bin” file: make sure you have the correct “.bin” file for firmware upgrade.

3.Wrong downloader: you should use iOptron Downloader instead of the Flash Downloader.

4.Use cp210x driver provided by iOptron. The newest version from SiLab may not work properly for iOptron’s hand controller.

40

Image 40

Contents SmartStar MiniTower ProTM Table of Content Go to the MoonNever USE a Telescope to Look AT the SUN MiniTower ProTM Features MiniTower ProTM OverviewLbs of Payload Extremely PortableAccurate Goto and Tracking MiniTower Pro in an aluminum caseAdditional Unique Features MiniTower Pro with dual scope setupMiniTower ProTM Components1 Shown in the pictureMiniTower ProTM Assembly MiniTower Pro Assembly#4 Rod #3 Knob OTA Mounting and Balancing This step is for attaching a second scopeOperate a MiniTower Pro on Batteries Gotonovatm 8401 Hand Controller Key DescriptionLCD Screen Connection to a ComputerSetting Up the Mount Getting StartedLevel and Align the Mount Initial PositionsSet Up Time Zone Press ENTER. Scroll down and select Set up siteSet Mount Type Set Up Daylight Saving TimeSet Anti-backlash Use the MiniTower Pro Turn Off the MountManual Operation of a Telescope Go to the MoonSlew to an Object Sync to Target Set Up ControllerElectric Focuser Align PEC OptionMaintenance and Servicing IOptron Customer Service Star Alignment accuracy Goto accuracyAppendix A. Technical Specifications GPSAppendix B. Gotonovatm 8401 HC Menu Structure MenuPage Appendix C. Gotonovatm Star List Gotonova Deep Sky Object List5373 Modern Constellations Gotonova Named Star List Gotonova Double Star List Appendix D. Set Up USB-PC Connection Page When finished installation, click Finish Page Page Page Page Appendix E. Firmware Upgrade Page Typical Errors Appendix F. Use a PC to Control an iOptron Mount Appendix G. RS-232 Command Set Command Gt# Response sDD*MMSS# Command GL# Response HHMMSS.S#Command GS# Response HHMMSS.S# Command GR# Response HHMMSS.S#Command Qn# Qs# Qe# Qw# Response none Command Q# Response noneCommand RG# Response none Command RC# Response noneCommand Sr HHMMSS.S# Response Command Sd sDD*MMSS# ResponseCommand F+# F-# FF# FS# FQ# Response none Command F1# F2# F3# F4# Response noneCommand SGS0#,SGS1#,SGS2#,SGS3# Response none Command GGS# Response ‘0’,’1’,2,’3’Command SE?# Response ‘0’,’1’ Command GAM# Response ‘0’,’1’, ‘2’Ioptron TWO Year TELESCOPE, MOUNT, and Controller Warranty