To enable wireless adapters
1.Open the Motion Dashboard. From the Windows task bar, tap the Motion Dashboard
icon .
2.Tap Wireless.
3.Tap the check boxes next to all wireless networks you intend to use:
•Enable Bluetooth Internal Wireless
•Enable 802.11 Internal Wireless
•Enable Mobile Broadband with GPS (If this option is not listed, your CL900 does not have mobile broadband capabilities.)
NOTE: To extend battery life, enable only the wireless devices that you will be using.
Set up Wi-Fi
Connect to the Internet and other computers wirelessly over
To set up Wi-Fi
1.Enable
2.From the notification area, tap the wireless network icon .
3.Tap the desired wireless network from the list of available networks.
Set up mobile broadband with GPS
If you purchased your CL900 with the optional mobile broadband module, you can connect to
To set up mobile broadband
1.Enable mobile broadband from the Motion Dashboard.
2.Start the Motion Connection Manager. From the Start menu, select All Programs > Motion Computing > Motion CM.
3.Tap the help icon and select the help topic, Setting up mobile broadband.
4.Follow the instructions to set up a network profile and connect to the mobile broadband network.
NOTE: Before you can connect to a mobile broadband network, you must have an active account with a cellular network provider. Some providers require a SIM card for mobile broadband access; if you are not sure whether you need one, contact your mobile broadband provider.
Chapter 1 Getting Started | Where to begin with your CL900 9 |