TIP: You may find it helpful to use a small screw driver or something similar to assist threading the loop through the tight space of the tether attach point.
You can purchase pens from the Motion Computing Accessories page.
Connect the tablet to a docking station
The CL900 docking station is a separate accessory that you can purchase from the Motion Computing Accessories page. The docking station has:
•Three USB ports to connect a keyboard, mouse, or other USB devices
•An Ethernet port to connect to a local network
•A pen tether attach point
To connect the tablet to a docking station
1.Connect the AC adapter to the port on the back of the docking station.
2.If desired, connect a mouse and or keyboard to USB ports on the back of the docking station.
3.With the front of the dock facing you and holding the tablet upright, slip the tablet into the dock.
TIP: You will know if the tablet is seeded properly if the battery gauge located on the left side of the tablet lights up.
Connect the tablet to a display monitor
Connect a display monitor directly to the CL900 tablet itself using the
To set up an external monitor
1.Connect the monitor cable from the external monitor into the
2.Plug in the external monitor and turn it on.
3.If necessary, install software and drivers for the monitor. See the manufacturer’s documentation for more information.
After connecting the monitor, set up the external display from the Motion Dashboard as described in “Setting up an external display” on page 40.
Chapter 1 Getting Started | Optional setup tasks 13 |