ViewSonic PJ658 manual Using the remote control, Tion Menu

Page 20

Remote control

Using the remote control

CAUTION ►Be careful in handling the remote control.

•Do not drop or expose the remote control to physical impact.

•Do not get the remote control wet or place it on wet objects. It may result in malfunction.

•Remove the batteries from the remote control and store them in a safe place if you won’t be using the remote control for an extended period.

•Replace the batteries whenever the remote control starts malfunctioning.

•When strong lights (such as direct sunlight) or light from an extremely close range (such as from an inverter fluorescent lamp), hit the projector’s remote sensor, the remote control may cause to function. Adjust the direction of the projector to keep the light from directly hitting the projector’s remote sensor.

The signal settings for the remote control transmitter and the projector's remote sensor can be changed. If the remote control does not function properly try changing the signal setting.

Changing the signal setting for the remote control transmitter (1)Setting 1 (FREQ. : NORMAL)

Simultaneously press and hold the MUTE and RESET buttons for about 3 seconds. (2)Setting 2 (FREQ. : HIGH)

Simultaneously press and hold the MAGNIFY OFF and ESC buttons for about 3 seconds.

•Setting 1 is the factory default setting.

•When the batteries are removed from the remote control, user-specified settings are saved for about half a day. If the batteries are removed from the remote control for longer than half a day, the remote will reset to Setting 1.

Changing the signal setting for the projector's remote sensor

Switch between Setting 1 and 2 using the SERVICE/REMOTE FREQ. item found in OP-

TION MENU.

If the remote control does not seem to function properly, try changing the settings for the remote control and the projector's remote sensor.

The remote control will not function properly if the remote control transmitter settings and the projector's remote sensor settings are not the same.

The remote control works with the projector’s remote sensor.

30º

approx. 3 meters

30º

 

•The range of the remote sensor is 3 meters with a 60 degree range (30 degrees to the left and right of the remote sensor).

•Also a remote signal reflected in the screen etc. may be available. If it is difficult to send a remote signal to the sensor directly, please try to use the reflected signal.

•Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the remote control in an area free from obstacles that could block the re- mote control’s output signal to the projector.

ViewSonic

PJ658

16

Page 19 Page 21
Image 20
Page 19 Page 21
Contents ViewSonic Compliance Information Important Safety Instructions Copyright Information Product Registration For Your RecordsContents of package About this manualContent About contents of package Fastening the lens cover Part names ProjectorCR/PR ComponentCB/PB Magnify Remote controlControl buttons Setting up Arrangement Min Max DownAdjusting the projectors elevator Elevator feet Elevator buttonSecurity Bar Anti-theft chain or wire sold separately Using the Security BarHow to attach Connecting your devices About Plug-and-Play capabilityConnecting to a monitor output Connecting to a speaker with amplifier outputExamples of connection with a computer RS-232C USBCR/PR Examples of connection with a VCR/DVD playerCB/PB Connecting power supply AC inlet Connector Power cordRemote control Putting batteriesUsing the remote control Tion MenuPower on/off Turning on the powerTurning off the power Blinking in orangeAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Adjusting the zoom and focusSelecting an input signal Selecting an aspect ratioUsing the automatic adjustment feature Adjusting the position For a video signal or s-video signal  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenAvailable function Remote control operation Operating the computer screenUSB mouse and keyboard control Move pointerMultifunctional settings Using the menu functionEasy Menu Advanced MenuEasy Menu Easy Menu Using the buttons / adjusts the brightness. Light  Dark Using the buttons / adjusts the contrast. Strong  WeakUsing the buttons / switches the Gamma mode Picture MenuPicture Menu Color TempMY Memory LOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Phase Image MenuOver Scan PositionAuto Adjust Image MenuSize ExecuteInput Menu ProgressiveVideo NR Color SpaceInput Menu ComponentVideo Format Frame LockResolution Custom Resolution BOXSetup Menu Normal  WhisperSetup Menu Using the buttons / switches the mode for mirror statusVolume AudioScreen Menu BlankMyScreen Lock Screen MenuStart UP Source Name No Input is Detected Sync is OUT of RangeMessage Option Menu Auto SearchStone Auto onReset  Cancel Option MenuAuto OFF Lamp TimeService FAN SpeedGhost Filter MessageFactory Reset Remote Freq1NORMAL  2HIGH InformationUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function Description If you have forgotten your PasswordTurning on the MyScreen Password Setting the PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off Turning Off the PIN Lock Function If you have forgotten your PIN CodeTurning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password Setting the Transition Detector off Maintenance LampCase of replacement by yourself LampType number = RLC-017 Lamp cover Screw ScrewsAir filter Handle Filter coverAir filter Air filter’s knobPJ658 Troubleshooting There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Electrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly workVolume is adjusted to an extremely low level Audio setting is not correctColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Either the focus and/or horizontal phase settings areWhisper function is working Lamp is approaching the end of its product life TimeWarranty and after-service SpecificationsSpecifications Customer Support Country Web Site =Telephone Mail Region =FaxLimited Warranty ViewSonic Projector What the warranty covers

PJ658 specifications

The ViewSonic PJ658 is a versatile and powerful portable projector, designed to meet the needs of both business professionals and educators. Combining advanced technologies with user-friendly features, this projector stands out in the crowded market of portable projection solutions.

One of the main features of the PJ658 is its impressive brightness level. With a high lumen output, the projector delivers vivid and clear images even in well-lit environments. This makes it an ideal choice for conference rooms or classrooms where ambient light can be a challenge. The ability to project bright, detailed images ensures that presentations are engaging and easily viewable by all attendees.

The PJ658 utilizes DLP technology, which is known for its reliability and high-quality image production. DLP projectors are recognized for their sharpness, color accuracy, and ability to produce high contrast ratios, allowing for vibrant colors and deep blacks. This technology also contributes to the PJ658's ability to deliver smooth motion graphics, making it an excellent choice for video presentations as well.

Another notable feature of the PJ658 is its versatile connectivity options. Equipped with HDMI, VGA, and USB ports, this projector enables seamless connections to a variety of devices, including laptops, tablets, and external media players. This flexibility allows users to easily switch between devices during presentations without any technical hitches.

Portability is a key characteristic of the PJ658. Its compact and lightweight design allows users to easily transport the projector from one location to another. Whether moving from office to office or carrying it to a remote training session, the PJ658 is designed for convenience. Additionally, it features an easy-to-use interface, enabling users to set up and start presentations in no time.

The PJ658 also comes with built-in speakers, which add to its usability in various settings. This feature eliminates the need for external audio equipment, making it even more convenient for mobile users. Whether for a meeting, lecture, or casual viewing, the PJ658 is equipped to handle audio output effectively.

In terms of lamp life, the PJ658 boasts an extended lifespan, reducing the frequency and cost of lamp replacements. This not only enhances the projector's longevity but also provides users with a cost-effective solution in the long run.

Overall, the ViewSonic PJ658 combines robust performance, advanced technologies, and user-friendly design, making it a top choice for anyone in need of a reliable portable projector. Its brightness, image quality, and connectivity options set it apart, making it suitable for various professional and educational applications.
Top Page Image Contents