SCREEN Menu
SCREEN Menu (continued)
Item | Description |
|
|
| |
| Using the buttons ▲/▼ turns on/off the message function. | |
| TURN ON TURN OFF |
|
| When the TURN ON is selected, the following message function works. | |
| “AUTO IN PROGRESS” while automatically adjusting | |
| ”NO INPUT IS DETECTED” |
|
| ”SYNC IS OUT OF RANGE” |
|
| “Searching….” while searching for the input |
|
MESSAGE | ”Detecting….” while an input signal is detected | |
| The indication of the input signal displayed by changing | |
| The indication of the aspect ration displayed by changing | |
| The indication of the My Memory displayed by changing | |
| The indication of the Picture Mode displayed by changing | |
| The indication of “FREEZE” and “II” while freezing the screen by | |
| pressing the FREEZE button. |
|
| • When the TURN OFF is selected, please remember if the picture | |
| is freezing. Do not mistake freezing for a malfunction. | |
| Each input port for this projector can have a name applied to it. | |
| (1) Use the ▲/▼ buttons on the SCREEN | ����������� |
| menu to select SOURCE NAME and press | ������������ |
| the ► button. The SOURCE NAME menu | ���������������������� |
| will be displayed. | ��������������� |
| (2) Use the ▲/▼ buttons on the SCREEN | ������������������ |
| ��������������� | |
| NAME menu to select the port to be named | SOURCE NAME MENU |
| and press the ► button. The SOURCE | |
| *Right side of the menu is blank | |
| NAME dialog will be displayed. | until a name is specified |
|
| (3) The current name will be displayed on | � | |
|
| the first line. Use the ◄/►/▲/▼ and EN- | ������������������� | |
|
| �������� | ||
|
| TER or INPUT buttons to select and enter | ����������������������� � | |
|
| characters. The RESET button can be used | ��������������������������� | |
|
| ��������������������������� | ||
|
| to erase 1 character at a time. The name | ������������������������������������������ | |
|
| can be a maximum of 16 characters. | ||
SOURCE NAME | ��������������� | |||
(4) To change an already inserted charac- | ����������������� �������������� | |||
|
| � | ||
|
| ter, press the ▲ button while the cursor is | ||
|
| on the | ������������������� | |
|
| �������� | ||
|
| name displayed on the first line and use | �������������������������������������������������� | |
|
| the ◄/► buttons to select character to be | � | |
|
| ��������������������������� | ||
|
| changed. Once a character in the name is | ����������������������� | |
|
| ������������������� | ||
|
| selected use the ▼ button to move the cur- | ��������������� | |
|
| sor back down to the character entry area | ����������������� | |
|
| to select and enter characters as described | ������������������� | |
|
| above. |
| ��������� |
|
|
|
| |
|
| (5) Select | and press the ENTER or IN- | ��������������������������� |
|
| ����������������������� � | ||
|
| PUT buttons when finished entering text. | ||
|
| ��������������������������� | ||
|
| To revert to the previous name without sav- | ����������������������� | |
|
| ������������������� | ||
|
| ing changes press the ESC or ◄ button and | ��������������� | |
|
| the INPUT button simultaneously. | ����������������� �������������� | |
|
|
|
| |
ViewSonic | PJ658 |
| 39 |