ViewSonic PJ658 manual Screen Menu, Start UP, MyScreen Lock

Page 42

SCREEN Menu

SCREEN Menu (continued)

Item

 

Description

 

 

 

 

 

 

Using the buttons ▲/▼ switches the mode for the start-up screen.

 

 

The start-up screen is a screen displayed when no signal or an

 

 

 

unsuitable signal is detected.

 

 

 

MyScreen ORIGINAL TURN OFF

 

 

 

MyScreen is a screen you can register as a desired screen.The

 

 

 

ORIGINAL screen is the existing standard screen. When TURN

 

START UP

 

OFF is selected, the BLACK screen is used.

 

 

• To avoid remaining as an afterimage, the MyScreen and the

 

 

 

 

 

 

ORIGINAL screens will change to the BLANK screen after several

 

 

 

minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it

 

 

will change to the BLACK screen.

 

 

 

• For the MyScreen, please refer to the item MyScreen below. For

 

 

 

the BLANK screen, please refer to the BLANK item.

 

 

 

• This function will be unavailable and fixed to Myscreen when

 

 

MyScreen Password in the Security Menu is on.

 

 

 

This item functions for capturing the MyScreen of the blank screen

 

 

and the start-up screen. Please execute displaying the input includ-

 

 

ing the picture you want to capture.

 

 

 

1. Selecting this item displays a dialog titled “MyScreen”. It will ask

 

 

 

you if you start capturing the picture from the current screen.

 

 

 

Please wait for the target picture to be displayed, and press the

 

 

 

ENTER button on the remote control when the picture is displayed.

 

 

The picture will freeze and the frame for capturing appears.

 

 

 

To stop performing, press the RESET or ESC button on the re-

 

 

 

mote control.

 

 

 

2. Using the buttons ◄/►/▲/▼ adjusts the frame position. Please

 

 

 

move the frame to the position of the picture which you want to use.

MyScreen

 

The frame may not be able to be moved for some input signals.

 

 

To start registration, press the ENTER button on the remote con-

 

 

 

 

 

 

trol.

 

 

 

To restore the screen and return to the previous dialog, press the

 

 

RESET or ESC button on the remote control.

 

 

 

Registration takes several minutes. When the registration is com-

 

 

 

pleted, the registered screen and the message “MyScreen registra-

 

 

tion is finished.” are displayed for several seconds. If the registra-

 

 

 

tion failed, the message “A capturing error has occurred. Please try

 

 

again.” is displayed.

 

 

 

• This function will be unavailable when MyScreen Password in the

 

 

Security Menu is on.

 

 

 

NOTE : The KEYSTONE cannot be adjusted while using the

 

 

 

MyScreen function.

 

 

 

Using the buttons ▲/▼ turns on/off the MyScreen lock function.

 

 

 

TURN ON TURN OFF

 

MyScreen Lock

When the TURN ON is selected, the item MyScreen is locked. Use

this function for protecting the current MyScreen.

 

 

 

 

 

 

• This function will be unavailable when MyScreen Password in the

 

 

Security Menu is on.

 

ViewSonic

PJ658

38

Page 41 Page 43
Image 42
Page 41 Page 43
Contents ViewSonic Compliance Information Important Safety Instructions Copyright Information Product Registration For Your RecordsContents of package About this manualContent About contents of package Fastening the lens cover Part names ProjectorComponent CB/PBCR/PR Remote control Control buttonsMagnify Setting up Arrangement Min Max DownAdjusting the projectors elevator Elevator feet Elevator buttonUsing the Security Bar How to attachSecurity Bar Anti-theft chain or wire sold separately Connecting your devices About Plug-and-Play capabilityExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output RS-232C USBExamples of connection with a VCR/DVD player CB/PBCR/PR Connecting power supply AC inlet Connector Power cordRemote control Putting batteriesUsing the remote control Tion MenuTurning off the power Power on/offTurning on the power Blinking in orangeOperating Adjusting the volumeSelecting an input signal Temporarily muting the soundSelecting an input signal Searching an input signalAdjusting the zoom and focus Selecting an aspect ratio For a video signal or s-video signal Using the automatic adjustment featureAdjusting the position  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenUSB mouse and keyboard control Available function Remote control operationOperating the computer screen Move pointerEasy Menu Multifunctional settingsUsing the menu function Advanced MenuEasy Menu Easy Menu Using the buttons / switches the Gamma mode Using the buttons / adjusts the brightness. Light  DarkUsing the buttons / adjusts the contrast. Strong  Weak Picture MenuPicture Menu Color TempMY Memory LOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Over Scan PhaseImage Menu PositionSize Auto AdjustImage Menu ExecuteVideo NR Input MenuProgressive Color SpaceVideo Format Input MenuComponent Frame LockResolution Custom Resolution BOXSetup Menu Normal  WhisperVolume Setup MenuUsing the buttons / switches the mode for mirror status AudioScreen Menu BlankScreen Menu Start UPMyScreen Lock No Input is Detected Sync is OUT of Range MessageSource Name Stone Option MenuAuto Search Auto onAuto OFF Reset  CancelOption Menu Lamp TimeGhost ServiceFAN Speed Filter Message1NORMAL  2HIGH Factory ResetRemote Freq InformationChanging the Password Using Security FeaturesInputting the Password SecurityTurning on the MyScreen Password Using the MyScreen Password FunctionDescription If you have forgotten your Password Setting the PasswordUsing the PIN Lock Function Turning the Password offRegistering the PIN Code Turning Off the PIN Lock Function If you have forgotten your PIN CodeUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off Maintenance LampType number = RLC-017 Case of replacement by yourselfLamp Lamp cover Screw ScrewsAir filter Handle Filter coverAir filter Air filter’s knobPJ658 Internal temperature is rising TroubleshootingThere is no input signal Related messagesRegarding the indicator lamps Regarding the indicator lamps Signal cables are not correctly connected Electrical power cord is not pluggedPower switch is not set to the on position Signal source does not correctly workColor settings are not correctly adjusted Volume is adjusted to an extremely low levelAudio setting is not correct Color Space setting is not suitableWhisper function is working Not properly adjustedEither the focus and/or horizontal phase settings are Lamp is approaching the end of its product life TimeWarranty and after-service SpecificationsSpecifications Customer Support Country Web Site =Telephone Mail Region =FaxLimited Warranty ViewSonic Projector What the warranty covers

PJ658 specifications

The ViewSonic PJ658 is a versatile and powerful portable projector, designed to meet the needs of both business professionals and educators. Combining advanced technologies with user-friendly features, this projector stands out in the crowded market of portable projection solutions.

One of the main features of the PJ658 is its impressive brightness level. With a high lumen output, the projector delivers vivid and clear images even in well-lit environments. This makes it an ideal choice for conference rooms or classrooms where ambient light can be a challenge. The ability to project bright, detailed images ensures that presentations are engaging and easily viewable by all attendees.

The PJ658 utilizes DLP technology, which is known for its reliability and high-quality image production. DLP projectors are recognized for their sharpness, color accuracy, and ability to produce high contrast ratios, allowing for vibrant colors and deep blacks. This technology also contributes to the PJ658's ability to deliver smooth motion graphics, making it an excellent choice for video presentations as well.

Another notable feature of the PJ658 is its versatile connectivity options. Equipped with HDMI, VGA, and USB ports, this projector enables seamless connections to a variety of devices, including laptops, tablets, and external media players. This flexibility allows users to easily switch between devices during presentations without any technical hitches.

Portability is a key characteristic of the PJ658. Its compact and lightweight design allows users to easily transport the projector from one location to another. Whether moving from office to office or carrying it to a remote training session, the PJ658 is designed for convenience. Additionally, it features an easy-to-use interface, enabling users to set up and start presentations in no time.

The PJ658 also comes with built-in speakers, which add to its usability in various settings. This feature eliminates the need for external audio equipment, making it even more convenient for mobile users. Whether for a meeting, lecture, or casual viewing, the PJ658 is equipped to handle audio output effectively.

In terms of lamp life, the PJ658 boasts an extended lifespan, reducing the frequency and cost of lamp replacements. This not only enhances the projector's longevity but also provides users with a cost-effective solution in the long run.

Overall, the ViewSonic PJ658 combines robust performance, advanced technologies, and user-friendly design, making it a top choice for anyone in need of a reliable portable projector. Its brightness, image quality, and connectivity options set it apart, making it suitable for various professional and educational applications.
Top Page Image Contents