INPUT Menu
INPUT Menu
With the INPUT menu, the items shown in the table below can be performed.
Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.
������������ | ����������� | |
��������� | � | � |
���������������� | ||
������� | ����������������� | |
������� | ������������������ | |
������� | ����������������������� | |
�������� | ������������������ | |
�������� | ����������� | ������� |
����������� | ������� |
|
� | ����������� |
|
Item
Description
| Using the buttons ▲/▼ switches the progress mode. | |
| TV FILM TURN OFF | |
| • This function is performed only for an interlaced signal of a VIDEO | |
| input, an | |
PROGRESSIVE | or 625i (576i) signal. | |
• When TV or FILM is selected, the screen image will be sharp. | ||
| ||
| FILM adapts to the | |
| may cause a certain defect (for example, jagged line) of the picture | |
| for a quick moving object. In such a case, please select TURN OFF, | |
| even though the screen image may lose the sharpness. | |
| Using the buttons ▲/▼ switches the noise reduction mode. | |
| HIGH MID LOW | |
VIDEO NR | • This function performs only at a VIDEO input, an | |
COMPONENT VIDEO input of 525i(480i) or 625i(576i) signal. | ||
| ||
| • When this function is excessive, it may cause a certain degrada- | |
| tion of the picture. | |
| Using the buttons ▲/▼ switches the mode for color space. | |
| AUTO RGB SMPTE240 REC709 REC601 | |
COLOR SPACE | • This item can be selected only for an RGB signal or a component | |
video signal (except signals of SCART RGB from the component | ||
| video port). | |
| • The AUTO mode automatically selects the optimum mode. | |
| • The AUTO operation may not work well at some signals. In such a | |
| case, it might be good to select a suitable mode except AUTO. |
ViewSonic | PJ658 | 32 |