ViewSonic PJ658 manual Image Menu, Over Scan, Position, Phase

Page 34

IMAGE Menu

IMAGE Menu

With the IMAGE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

������������

�����������

 

���������

��������������������

������

�����������������

������

������������������

������

������������������

�������

������������������

�������

��������������������

����������

��������������������

 

Item

Description

 

 

Using the buttons ▲/▼ switches the mode for aspect ratio.

 

 

 

For an RGB signal

 

 

 

NORMAL 4:3 16:9 SMALL

 

ASPECT

 

For a video signal, s-video signal or component video signal

 

 

4:3 16:9 14:9 SMALL

 

 

 

 

 

 

For a no signal

 

 

 

4:3 (fixed)

 

 

 

• The NORMAL mode keeps the original aspect ratio of the signal.

 

 

 

Using the buttons ▲/▼ adjusts the over-scan ratio.

 

OVER SCAN

 

Large (It reduces picture) Small (It magnifies picture)

 

 

• This item can be selected only for a video, s-video and component signal.

 

 

• When this adjustment is too large, certain degradation may appear

 

 

at the frame area of the picture. In such a case, please adjust small.

 

 

Using the buttons ▲/▼ adjusts the vertical position.

 

 

 

Up Down

 

 

 

Over-adjusting the vertical position may cause noise to appear

 

V POSITION

 

on the screen. If this occurs please reset the vertical position to the

 

default setting. Pressing the RESET button when V POSITION is

 

 

 

selected will reset the V POSITION to the default setting.

 

 

 

For a video signal, s-video signal or component video signal

 

 

 

The adjustable range of V.POSITION depends on the OVERSCAN setting.

 

 

It is not possible to adjust when the OVERSCAN is set to 10.

 

 

 

Using the buttons ▲/▼ adjusts the horizontal position.

 

 

 

Left Right

 

 

 

Over-adjusting the horizontal position may cause noise to appear

H POSITION

 

on the screen. If this occurs please reset the horizontal position to

 

 

the default setting. Pressing the RESET button when H POSITION

 

 

is selected will reset the H POSITION to the default setting.

 

 

 

For a video signal, s-video signal or component video signal

 

 

 

The adjustable range of H.POSITION depends on the OVERSCAN setting.

 

 

It is not possible to adjust when the OVERSCAN is set to 10.

 

 

 

Using the buttons ▲/▼ adjusts the horizontal phase to eliminate flicker.

H PHASE

 

Right Left

 

 

• This item can be selected only for an RGB signal or a component

 

 

 

 

video signal.

 

ViewSonic

PJ658

30

Image 34
Contents ViewSonic Compliance Information Important Safety Instructions Copyright Information Product Registration For Your RecordsContents of package About this manualContent About contents of package Fastening the lens cover Part names ProjectorCB/PB ComponentCR/PR Control buttons Remote controlMagnify Setting up Arrangement Min Max DownAdjusting the projectors elevator Elevator feet Elevator buttonHow to attach Using the Security BarSecurity Bar Anti-theft chain or wire sold separately Connecting your devices About Plug-and-Play capabilityExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output RS-232C USBCB/PB Examples of connection with a VCR/DVD playerCR/PR Connecting power supply AC inlet Connector Power cordRemote control Putting batteriesUsing the remote control Tion MenuTurning off the power Power on/offTurning on the power Blinking in orangeOperating Adjusting the volumeSelecting an input signal Temporarily muting the soundSelecting an input signal Searching an input signalAdjusting the zoom and focus Selecting an aspect ratio For a video signal or s-video signal Using the automatic adjustment featureAdjusting the position  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenUSB mouse and keyboard control Available function Remote control operationOperating the computer screen Move pointerEasy Menu Multifunctional settingsUsing the menu function Advanced MenuEasy Menu Easy Menu Using the buttons / switches the Gamma mode Using the buttons / adjusts the brightness. Light  DarkUsing the buttons / adjusts the contrast. Strong  Weak Picture MenuPicture Menu Color TempMY Memory LOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Over Scan PhaseImage Menu PositionSize Auto AdjustImage Menu ExecuteVideo NR Input MenuProgressive Color SpaceVideo Format Input MenuComponent Frame LockResolution Custom Resolution BOXSetup Menu Normal  WhisperVolume Setup MenuUsing the buttons / switches the mode for mirror status AudioScreen Menu BlankStart UP Screen MenuMyScreen Lock Message No Input is Detected Sync is OUT of RangeSource Name Stone Option MenuAuto Search Auto onAuto OFF Reset  CancelOption Menu Lamp TimeGhost ServiceFAN Speed Filter Message1NORMAL  2HIGH Factory ResetRemote Freq InformationChanging the Password Using Security FeaturesInputting the Password SecurityTurning on the MyScreen Password Using the MyScreen Password FunctionDescription If you have forgotten your Password Setting the PasswordTurning the Password off Using the PIN Lock FunctionRegistering the PIN Code Turning Off the PIN Lock Function If you have forgotten your PIN CodeSetting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off Maintenance LampType number = RLC-017 Case of replacement by yourselfLamp Lamp cover Screw ScrewsAir filter Handle Filter coverAir filter Air filter’s knobPJ658 Internal temperature is rising TroubleshootingThere is no input signal Related messagesRegarding the indicator lamps Regarding the indicator lamps Signal cables are not correctly connected Electrical power cord is not pluggedPower switch is not set to the on position Signal source does not correctly workColor settings are not correctly adjusted Volume is adjusted to an extremely low levelAudio setting is not correct Color Space setting is not suitableWhisper function is working Not properly adjustedEither the focus and/or horizontal phase settings are Lamp is approaching the end of its product life TimeWarranty and after-service SpecificationsSpecifications Customer Support Country Web Site =Telephone Mail Region =FaxLimited Warranty ViewSonic Projector What the warranty covers

PJ658 specifications

The ViewSonic PJ658 is a versatile and powerful portable projector, designed to meet the needs of both business professionals and educators. Combining advanced technologies with user-friendly features, this projector stands out in the crowded market of portable projection solutions.

One of the main features of the PJ658 is its impressive brightness level. With a high lumen output, the projector delivers vivid and clear images even in well-lit environments. This makes it an ideal choice for conference rooms or classrooms where ambient light can be a challenge. The ability to project bright, detailed images ensures that presentations are engaging and easily viewable by all attendees.

The PJ658 utilizes DLP technology, which is known for its reliability and high-quality image production. DLP projectors are recognized for their sharpness, color accuracy, and ability to produce high contrast ratios, allowing for vibrant colors and deep blacks. This technology also contributes to the PJ658's ability to deliver smooth motion graphics, making it an excellent choice for video presentations as well.

Another notable feature of the PJ658 is its versatile connectivity options. Equipped with HDMI, VGA, and USB ports, this projector enables seamless connections to a variety of devices, including laptops, tablets, and external media players. This flexibility allows users to easily switch between devices during presentations without any technical hitches.

Portability is a key characteristic of the PJ658. Its compact and lightweight design allows users to easily transport the projector from one location to another. Whether moving from office to office or carrying it to a remote training session, the PJ658 is designed for convenience. Additionally, it features an easy-to-use interface, enabling users to set up and start presentations in no time.

The PJ658 also comes with built-in speakers, which add to its usability in various settings. This feature eliminates the need for external audio equipment, making it even more convenient for mobile users. Whether for a meeting, lecture, or casual viewing, the PJ658 is equipped to handle audio output effectively.

In terms of lamp life, the PJ658 boasts an extended lifespan, reducing the frequency and cost of lamp replacements. This not only enhances the projector's longevity but also provides users with a cost-effective solution in the long run.

Overall, the ViewSonic PJ658 combines robust performance, advanced technologies, and user-friendly design, making it a top choice for anyone in need of a reliable portable projector. Its brightness, image quality, and connectivity options set it apart, making it suitable for various professional and educational applications.