Intel Ethernet Switch Boards manual ETX Solution, Computer-On-Modules / ETX,  ETX Starter-KIT

Computer-On-Modules / ETX

 ETX – The Standard for Custom Designs

ETX module			Application board
X86 core		PCI bus
			Expansion
CPU		ISA bus
(MGX,	Chipset
VIA Eden,		IDE 1/2	Storage
Pentium,
Pentium III)
		12C. SMB		Control
		USB 1-4
	PC/AT I/O
		LPT or floppy
			Standard I/O
		COM 1 / 2
		Mouse/keyboard
		LVDS	Flat panel
	Video
	processor
		Analog VGA	CRT monitor
DRAM
(SODIMM)			Optional	Speaker /
	Audio	Analog audio
			audio amp.	microphone
	Ethernet	LAN	LAN / WAN

ETX-to-application board connection

Application board-to-external connection

The ETX Solution

 ETX

Features	ETX-PM
CPU	Intel® Pentium® M,
	Intel® Celeron® M
CPU Clock	600 MHz up to 1.8 GHz
Cache	1 MByte (L2 on chip)
	0 MByte up to 2 MByte (L2 on chip)
Chipset	Intel® 855 GME
Bus Speed	400 MHz
DRAM	1024 MByte (DDR-SDRAM)
DRAM socket	1x S0-DIMM, 200 pin
SM Bus Support	
Flash Disk	-
USB	4 ports USB 2.0
USB Boot/Legacy Support	/
Ethernet	10/100Base-Tx
Ethernet Controller	Intel® 82562
Audio Controller	VIA® VT1612A AC97
Graphics Controller	Intel® Extreme Graphics2
Graphics Memory	up to 32 MByte UMA
Flat Panel Interface	JILI Interface (LVDS)
Power Management	ACPI, APM 1.2
Power Consumption (typ.)	12.5 W @ 1.1 GHz
RoHS compliant	

				Available
				Q4/2005
ETX-P3Tx	ETX-P3T	ETX-P3m	ETX-VE	ETX-VEGA	ETX-e.lite
Intel® Celeron® Processor	Intel® Celeron® Processor	Mobile Intel® Pentium®	VIA® Eden ESP3000,	STPC® VEGA	STPC® ELITE
& ATI® Graphics		III Processor-M, Intel®	ESP4000, ESP7000,
		Celeron® Processor®	C3-800, ESP10000
733 MHz, 1 GHz	400 MHz, 733 MHz,	400, 650, 800, 933 MHz	300, 400, 700, 800	200 MHz	100 MHz
	1 GHz		MHz, 1 GHz
256 kByte (L2 on chip)	256 kByte (L2 on chip)	ETX-P3m: 512/256	64 kByte (L2 on chip)	16 kByte (L1)	8 kByte (L1)
		kByte (L2 on chip)
Intel® 815	Intel® 815	VIA® Twister™ T	VIA® Twister™ T	integrated	integrated
100 MHz	100 MHz	133 MHz	133 MHz	200 MHz	-
512 MByte (SDRAM)	512 MByte (SDRAM)	1024 MByte (SDRAM)	512 MByte (SDRAM)	256 MByte (SDRAM)	16/32/64 MByte SDRAM
					onboard (soldered)
1x S0-DIMM, 144 pin	1x S0-DIMM, 144 pin	1x S0-DIMM, 144 pin	1x S0-DIMM, 144 pin	1x S0-DIMM, 144 pin	-
				-	-
-	-	-	n.a.	CompactFlash Socket	CompactFlash Socket
4 ports USB 2.0	4 ports USB 2.0	4 ports USB 1.1	4 ports USB 1.1	2 ports USB 1.1,	2 ports USB 1.1
				4 ports USB 2.0 optional
/	/	/	/	/	/
10/100Base-Tx	10/100Base-Tx	10/100Base-Tx	10/100Base-Tx	10/100Base-Tx	10Base-Tx
Intel® 82562	Intel® 82562	Intel® 82551ER	Intel® 82551ER	Davicom DM9102A/D	Davicom DM9102AT
	(Davicom opt.)
VIA® VT1612A AC97	VIA® VT1612A AC97	VIA® VT1612A AC97	VIA® VT1612A AC97	PCI C-Media CMI8738	(optional)
ATI® Radeon Mobility M6	Intel® Extreme Graphics	VT8603C (S3Savage 4)	VT8603C (S3 Savage 4)	Silicon Motion Lynx 3DM	-
	(integrated)
up to 32 MByte UMA	up to 32 MByte UMA	up to 32 MByte UMA	up to 32 MByte UMA	up to 2 MByte Video	-
				Memory
JILI Interface (LVDS)	JILI Interface (LVDS)	JILI Interface (LVDS)	JILI Interface (LVDS)	JILI Interface (LVDS) or	-
				JIDI (digital) Interface
ACPI, APM 1.2	ACPI, APM 1.2	ACPI, APM 1.2	ACPI, APM 1.2	APM 1.2	APM 1.2
tbd.	14.5 W @ 733 MHz	12.5 W @ 800 MHz,	10 W @ 400 MHz	5 W @ 200 MHz	4 W @ 100 MHz
		22 W @ 1.2 GHz
					

ETX Computer-On-Modules are the perfect solution for embedded applications that require full PC functionality and high performance CPUs. They support x86 CPUs from 100 MHz to 1.8 GHz and offer a full complement of PC/AT I/O such as keyboard, serial, parallel and IDE interfaces. The full-featured ETX series also includes onboard USB, Ethernet, graphics and sound. ETX modules are installed on the application-specific baseboard much like an inte- grated circuit component, in a hostsite comprised of four low profile, surface mount connectors.

The baseboard provides the drive electronics and physical connectors for the I/O originating on the ETX. Additional I/O and application-specific subsystems may be integrated on the baseboard designed as PCI or ISA bus peripherals.

For more information download the Design Guide at www.kontron.com/techlib/whitepapers/ ETXDesignGuide116.pdf

The Thermal Concept

ETX Heatspreader provides:

Identical mechanical size - all ETX modules fit in the same system.

The only surface that needs cooling is the top of the heatspreader.

ETX Starter-KIT

Complete Starterkit for immediate evaluation purposes.

Includes all required hard- and software components for a quick start.

Choose your Module for the starterkit.

16

17