Optional Information
How to Change Port 1
4 from MDI-X to MDI
•All ports on the switch are
Intel® Express 410T Standal |
MDI | 1 | 2 | 3 | 4 |
English
button
MDI
Access the
5 Configuration Screen
•Connect your PC to the Management module’s serial port using the
•Set a
- 9600 baud | - 8 data bits |
- No parity | - 1 stop bit |
- No flow control |
|
Press Eto connect to the Configura- tion screen.
• Navigate the menus with these keys:
TMove to next item.
BMove to previous item.
zToggle options within a field.
c+ S Save changes to configuration.
c+ R Repaint the screen.
•<Auto> is the default setting for the ports. You only need to configure the port settings if you are having difficulty connecting to a device.
Configuration Screen: Items surrounded by angle
brackets < > indicate a toggle field. Use the zto toggle selections.
Speed | Auto = all port settings are | |
|
| automatically negotiated. |
| 100 = port set to 100Mbps. | |
| 10 = port set to 10Mbps. | |
Duplex | Half = port set to half duplex. | |
| Full = port set to full duplex. | |
| – = port set to auto mode. | |
Flow | enable = Flow control is enabled in full | |
Control |
| duplex mode. Back pressure is |
|
| enabled in half duplex mode. |
| disable = flow control is off. | |
| – | = port set to auto mode. |
|
|
|
3