Intel 100BASE-T4 manual Led, Color Status indications

Page 19

C H A P T E R 3

Connecting the Devices

•The Data % LEDs light green on each hub, indicating the overall network utilization percentage of the Ethernet segment. Because a stack of hubs is a single segment, utilization is the same for each hub in the stack.

•If an optional uplink module is installed in the media adapter slot, the appropriate cable is connected to the media adapter port, and the link status is good, the Media Adapter LED lights green. When this LED is on, port 1 on the hub is disabled.

•If an NMM is installed in the expansion slot, the Enbl LEDs on each hub in the stack light green, indicating the hub is properly connected to the other hubs in the stack and is actively managed by an NMM.

•If an NMM is installed in the expansion slot, the Management LEDs light as follows:

–The Stat LED lights green, indicating the NMM passed the confidence test and is operating normally.

–The Mstr LED lights green, indicating the NMM is the master NMM in the stack.

•A Port Status LED for each port on the hub provides port status.

LED	Color	Status indications
Hub ports 1–12	Green	Link is good, port is not
		partitioned (disabled).
	Amber	Link is good, port is
		partitioned.
	Off	Link is not detected.

17

Image 19

Contents User Guide First edition August Second edition Contents Index Customer Support Inside back cover Connect the stack Install the hubsPlug power cords into each hub, then check LEDs Quick StartOverview FeaturesFront panel Physical DescriptionRJ-45 100BASE-T4 ports Col LED matrixPwr StatExpansion Data %Media AdapterCascade connectors Power receptacleRear panel Media adapter slot Optional equipmentExpansion slot Express Hub InstallingRequirements A P T E R 2 Intel Express 100BASE-T4 Stackable Hub Installing a Single HubStacking Hubs A P T E R 2 Installing the Express HubRemoving a Hub from a Stack Installing Uplink ModulesAdding a Network Management Module NMM Connecting Cables to the Hub DevicesConnectingChecking the LEDs Color Status indications LEDPartitioned Ports Unit Numbering ConventionUsing a Switch to Connect Hubs 100BASE-TX Uplink Module Connecting to 100BASE-TX devicesConnecting to 10BASE-T devices Connecting to 100BASE-FX devicesRouting server 100BASE-TX Uplink Module and 10/100 Downlink 100BASE-TX Uplink Module and 10/100 switching hubFast Ethernet Physical Layer Media SpecificationsTopology Rules 100BASE-T4 and 100BASE-FX Basic RulesDistance limitations 100BASE-T4 and 100BASE-TXRepeater rules Network Topology Extensions Fast Ethernet Topology Rules P E N D I Optional Equipment SpecificationsOptional Equipment TechnicalCascade cables Network Management Module NMMTechnical Specifications Repeater Type Safety Agency ApprovalsInterface Options Voluntary Control Council for Interference Vcci Statement Statement of ConditionsElectromagnetic Emissions Electromagnetic SusceptibilityAvertissement Avvertenza Returning a defective product Limited WarrantyLimitation of liability and remedies 100BASE-T IndexUTP NMM 100BASE-FX 100BASE-TX Intel Automated Customer Support