Intel 100BASE-T4 manual Technical Specifications

Page 33

A P P E N D I X

B Optional Equipment and Technical Specifications

Technical Specifications

Network Protocol and Standards Compatibility

IEEE 802.3u 100BASE-T

Data Rate

T4: 100 Mbps with 8B/6T coding scheme

TX: 100 Mbps with 4B/5B coding scheme

FX: 100 Mbps with 4B/5B coding scheme

Electrical Specifications

Input power:	160 W
Thermal rating:	550 BTU/hr
AC line frequency:	47–63 Hz
Input voltage (rms):	90–264 V AC
Volt amperes rating:	250 VA

Physical Specifications

Dimensions: 11.18 (l) by 17.25 (w) by 2.57 (h) in. 28.40 (l) by 43.82 (w) by 6.53 (h) cm.

Weight:	10.0 lbs (4.5 kg) with filler panels installed
	12.3 lbs (5.6 kg) with an NMM and a media adapter
	installed (optional equipment)

Environmental Specifications

Operating temperature:	5° to 40° C
Storage temperature:	–25° to 70° C
Operating humidity:	85% maximum relative humidity,
	noncondensing
Storage humidity:	95% maximum relative humidity,
	noncondensing
Operating altitude:	10,000 ft (3,000 m) maximum
Storage altitude:	10,000 ft (3,000 m) maximum

31

Image 33

Contents User Guide First edition August Second edition Contents Index Customer Support Inside back cover Plug power cords into each hub, then check LEDs Install the hubsQuick Start Connect the stackOverview FeaturesPhysical Description Front panelRJ-45 100BASE-T4 ports Pwr LED matrixStat ColMedia Data %Adapter ExpansionPower receptacle Cascade connectorsRear panel Optional equipment Media adapter slotExpansion slot Installing Express HubRequirements A P T E R 2 Intel Express 100BASE-T4 Stackable Hub Installing a Single HubStacking Hubs A P T E R 2 Installing the Express HubRemoving a Hub from a Stack Installing Uplink ModulesAdding a Network Management Module NMM Connecting Cables to the Hub DevicesConnectingChecking the LEDs Color Status indications LEDPartitioned Ports Unit Numbering ConventionUsing a Switch to Connect Hubs 100BASE-TX Uplink Module Connecting to 100BASE-TX devicesConnecting to 100BASE-FX devices Connecting to 10BASE-T devicesRouting server 100BASE-TX Uplink Module and 10/100 Downlink 100BASE-TX Uplink Module and 10/100 switching hubPhysical Layer Media Specifications Fast EthernetTopology Rules Distance limitations Basic Rules100BASE-T4 and 100BASE-TX 100BASE-T4 and 100BASE-FXRepeater rules Network Topology Extensions Fast Ethernet Topology Rules P E N D I Optional Equipment SpecificationsTechnical Optional EquipmentCascade cables Network Management Module NMMTechnical Specifications Safety Agency Approvals Repeater TypeInterface Options Electromagnetic Emissions Statement of ConditionsElectromagnetic Susceptibility Voluntary Control Council for Interference Vcci StatementAvertissement Avvertenza Limited Warranty Returning a defective productLimitation of liability and remedies 100BASE-T IndexUTP NMM 100BASE-FX 100BASE-TX Intel Automated Customer Support