Intel GS-SR168 manual PCI Expansion Card Installation

Hardware Installation Process

Step 3-5: PCI Expansion Card Installation

GS-SR168 provides expansion riser slot for one PCI-X 64/66MHz slot; and one with PCI-E x8 slot. To install the peripheral, please go through the following steps.

Note!! Before installing the PCI expansion card, please check the card size limitation. Size limitation for PCI-X height is 203.4 mm x 95 mm.

Step 1 Lift the riser bracket slightly, then pull it out from the server chassis.

Step 2 Align the expansion card with the guiding groove. Slide the expansion card into the slot until the card firmly seats.

Step 3 Align the riser bracket to the system module (see the arrow direction mark 1), and push it to locked position.

Step 4 Reverse Step 1 & 2 to lock the riser bracket firmly. Installation completed.

Step 1

Step 2

Step 3

1 5