Adjusting The Projector’s Elevator
CAUTION
If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.
1Press and hold in the elevator buttons.
Elevator buttons
2Raise or lower the projector to the desired height and then release the elevator buttons. When you release the elevator buttons, the elevator feet will lock position.
Elevator feet
3As necessary, you can also adjust the height of the projector by twisting the elevator feet by hand.
7 ViewSonic PJ510