ViewSonic PJ510 manual Warranty And After-Service, Color settings are not correctly adjusted

Page 43

Phenomenon	Cases not involving a machine defect, and Items to be confirmed

Colors have a faded-	Color settings are not correctly adjusted.
out appearance, or	Perform picture adjustments by changing the COLOR BAL R, COLOR BAL G,
Color tone is poor.	COLOR BAL B, COLOR, and/or the TINT settings, etc.

	The brightness setting and/or contrast setting has not been properly adjusted.
	Perform picture adjustments by changing the BRIGHT and/or CONTRAST settings,
	etc.
Pictures appear dark.
Pictures appear dark.	The WHISPER mode is the current setting.
	Change (by releasing) from the WHISPER mode.

	Lamp is approaching the end of its product lifetime.
	Exchange the old lamp with a new lamp.

Pictures appear	Either the FOCUS setting or the H PHASE is not properly adjusted.
blurry.
blurry.	Adjust the focus and the H PHASE setting.

Warranty And After-Service

If a problem occurs with the equipment, first refer to the “Troubleshooting” section of this manual, and run through the suggested checks. If this does not resolve the problem contact your dealer or service company. They will tell you what warranty condition is applied.

ViewSonic PJ510

40

Image 43

Contents User Guide Contents Air Filter TroubleshootingSpecifications Customer Support LampFor Your Records Projector Features FeaturesProjector Part NamesProjector Front/Right Fastening The Lens Cap Projector Rear/Left Remote Control Reference for the 169 aspect ratio Setting UpArrangement Reference for the 43 aspect ratioAdjusting The Projector’s Elevator About Plug-and-Play Capability Connecting Your DevicesIf using a Scart RGB input Connecting to a computerConnecting to a DVD/VCR player Connecting Power Supply Putting Batteries Remote ControlOperating The Remote Control Turning On The Power Power ON/OFFPress the Input button Selecting An Input SignalTurning Off The Power Operating Adjusting The VolumeTemporarily Muting The Sound Adjusting The Position Correcting Keystone Distortions Using The Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Automatic Adjustment for Video InputFreezing The Screen Using The Magnify FeatureRGB input Signal SearchingSelecting The Aspect Ratio Temporarily Blanking The ScreenUsing The Menu Functions Multifunctional SettingsEx. Adjusting Volume Main Menu PICTURE-1 Menu PICTURE-2 Menu Input Menu S2-ASPECT Video NRProgressive InformationSearch AdjustPower OFF Auto MenuMenu Position Screen MenuBlank Start UPLamp Time VolumeOption Menu Screen TypeLamp High Voltage High Temperature High PressureReplacing The Lamp Caring For The Air Filter Air FilterReplacing The Air Filter Caring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingReplace the air filter and filter cover Power Lamp Regarding The Indicator LampsViewSonic PJ510 Phenomena That May Easily Be Mistaken For Machine Defects Power outage blackout, etcColor settings are not correctly adjusted Warranty And After-ServiceSpecification Specifications= FAX Customer SupportWhat the warranty does not cover What the warranty coversHow long the warranty is effective Who the warranty protectsAppendix Power Cord Safety GuidelinesUser Information for all Countries Compliance Information for U.S.ACompliance Information for Canada Compliance Information for European CountriesViewSonic Corporation