Adjusting The Position
1Press the POSITION button.
As illustrated on the right, a dialog box will appear on the screen to aid you in adjusting the position.
2Use the (W), (X), (S), (T) buttons to adjust the position.
When you want to initialize the position, press the RESET button during adjustment.
Press the POSITION button again to close the dialog box and complete this operation. (Even if you don't do anything, the dialog box will automatically disappear after a few seconds.) This function is only available for RGB input.
NOTE:
Position adjustment applies to OSD menu and not the position of the picture.
17 ViewSonic PJ510