Selecting An Input Signal
1Using the projector’s control button
Press the INPUT button.
As illustrated below, each time you press the INPUT button, the projector switches between its input signal ports. Select the signal you wish to project.
Selecting a RGB signal, using the remote control Press the RGB button.
When this button is pressed, the projector switches to the RGB port.
Selecting a video signal, using the remote control Press the VIDEO button.
As illustrated below, each time you press the VIDEO button, the projector switches between its input signal ports. Select the signal you wish to project.
2Use the zoom ring to adjust the screen size.
3Use the focus ring to focus the picture.
INPUT button
RGB button
VIDEO button
Zoom knob
Focus ring
ViewSonic PJ510 | 14 |