ViewSonic PJ510 manual Main Menu

MAIN Menu

With the MAIN menu, the items shown in the Table below can be performed. Perform each operation in accordance with the instructions in the table below.

Item		Description
KEYSTONE	Adjust the Keystone (Vertical) Distortion:
	Upper in the data (S)↔(T) Lower in the data
	•	The adjustable range of this function will vary with the type of input signal. At some signals, this
		function may not work well.
	•	When the V:INVERT or the H&V:INVERT is selected under the MIRROR item, if the projector
		screen is inclined or if the projector is angled downward, this function may not work correctly.
	•	When the WIDE is selected under the ASPECT item of the MAIN menu, this adjustment is
		ignored.
	•	When the zoom adjustment is set to the TELE side, this correction may be excessive. This
		function should be used with zoom set to WIDE whenever possible.
BRIGHT	Adjust the Brightness: Light (S)↔(T) Dark
CONTRAST	Adjust the Contrast: Strong (S)↔(T) Weak
ASPECT	Select an Aspect Ratio
	At a RGB input:
	4:3 (S)↔(T) 16:9 (S)↔(T) 15:9 (S)↔(T) 32:15
	•	At a RGB input, selecting an aspect ratio may display the message “SYNC IS OUT OF RANGE”.
		In this case, please select one of other aspect ratios.
	At a VIDEO input, a S-VIDEO input or a COMPONENT VIDEO input:
	4:3 (S)↔(T) 16:9 (S)↔(T) WIDE (S)↔(T) ZOOM
	•	At a COMPONENT VIDEO input of 16:9 Hi-Vision of 1125i(1035i/1080i)/750p, only 16:9 can be
		selected.
	• When the 4:3 is selected under the SCREEN TYPE item of the OPTION menu, WIDE and
		ZOOM cannot be selected.
WHISPER	Select the Whisper Mode:
	NORMAL (S)↔(T) WHISPER
	•	When the WHISPER is selected, acoustic noise and screen brightness are reduced.
MIRROR	Select a Mirror Status:
	NORMAL(S)↔(T)H:INVERT (S)↔(T) V:INVERT (S)↔(T) H&V:INVERT
LANGUAGE	Select a Menu Language:
RESET	Reset the MAIN Menu Items:
	Selecting the EXECUTE performs this function.
	EXECUTE (S)← CANCEL
	•	The items of the MAIN menu are collectively returned to the initial setting. Note that the items
		WHISPER and LANGUAGE are not reset

ViewSonic PJ510 22