Installing and Removing the Hard Drive Backplane Cover
Before beginning these steps, power down your server system and unplug all AC power cords.
You will need to remove the hard drive backplane cover to perform the following operations:
•To install or remove the fan box
•To install or remove the hard drive backplane
•To install or remove the mounting plate
Removing the Hard Drive Backplane Cover
Before beginning these steps, you must remove the top cover from the system. For instructions, see “Removing the Top Cover” on page 36.
1.Use the finger grip and lever to pull and hold the two levers at the top of the hard drive backplane cover.
2.Pull the backplane cover from the system.
B
A
AF001217
Figure 88. Removing the Hard Drive Backplane Cover
3.Determine your next course of action and refer to the appropriate steps:
—If you are following these steps as part of another procedure, return to that procedure.
—Reinstall the hard drive backplane cover. For instructions, see “Installing the Hard Drive Backplane Cover” on page 88.
Intel® Server System SR9000MK4U Product Guide | 87 |