Installing the Air Flow Guide
These steps assume you have removed the air flow guide, as described in “Removing the Air Flow Guide” on page 95 and your system is partially disassembled.
1.Place the air flow guide in the chassis.
2.Verify all three hooks in the chassis align with the corresponding three slots in the air flow guide as shown in the figure below.
AF001231
Figure 96. Installing the Air Flow Guide
3.Route loose cables through the cable guides at the rear of the air flow guide.
4.Determine your next course of action and refer to the appropriate steps:
—If you are following these steps as part of another procedure, return to that procedure.
—If you are ready to
✧The PCI card divider. For instructions, see “Installing the PCI Card Divider” on page 93.
Intel® Server System SR9000MK4U Product Guide | 97 |