Removing a Hard Drive
Cautions:
•Before performing the procedures in this chapter, except for when
•If you attempt to replace a faulty hard drive using inappropriate procedures may result in data corruption.
•Before replacing any hard drives, back up all data.
•Replacing a hard drive that has not failed may corrupt data on the drive. Remove only the failed drive.
•Do not subject the hard drive to vibrations or impacts. Drive failure may result from vibrations or impact.
1.Push down on the button at the top of the drive carrier lever. See letter “A” in the figure below.
2.Pull forward on the lever to open it. See letter “B”.
3.Continue pulling on the lever to slide the carrier from the system.
B A
AF001108
Figure 28. Pulling Down on the Hard Drive Carrier Lever
40 | Intel® Server System SR9000MK4U Product Guide |