ViewSonic PJ1172 manual Connecting Your Devices, Plug-and-Play Capability

Page 11

Connecting Your Devices

WARNING

Whenever attempting to connect other devices to the projector, read thoroughly the “Quick Start Guide”, this manual and the manual of each device to be connected. Incorrect connections could result in fire or electrical shock.

CAUTION

Turn off all devices prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector.

ATTENTION

Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector. Refer to the section “Technical” of this manual for the pin assignment of connectors and RS-232C communication data.

Some cables may have to be used with core set. Use the accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector.

Secure the screws on the connectors and tighten.

Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.

NOTE

Some computers may have multiple display screen modes. Use of some of these modes may not be compatible with this projector.

For some RGB input modes, an optional Mac adapter is necessary.

When the image resolution is changed on a computer, depending on an input, automatic adjust function may take some time and may not be completed. In this case, you may not be able to see a check box to select “Yes/No” for the new resolution on Windows, and the resolution will go back to the original. It might be recommended to use other CRT or TFT monitors to change the resolution.

NOTE

Plug-and-Play Capability

Plug-and-Play is a system incorporated in the computer, its operating system and peripheral equipment (i.e. display devices).

This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel) compatible.

Please take advantage of this function by connecting the accessory RGB cable to the RGB port (DDC 1/2B compatible). Plug-and-Play may no t work properly if any other type of connection is attempted.

Please use the standard drivers in your computer, as this projector is a Plug-and-Play monitor.

Please refer to the following (for example) for connecting your devices. See the rear of the projector. You can see the ports.

ViewSonic PJ1172

6

Image 11
Contents ViewSonic CE Conformity Compliance InformationImportant Safety Instructions For Your Records Electronic Warranty RegistrationContents Preparation Projector FeaturesProjector Front/Right Projector Rear/Left Part NamesProjector Control Buttons Remote ControlLaser Indicator Remote ControlSide View Reference for the 43 aspect ratio Setting UpArrangement Side ViewAdjusting The Projector’s Elevator Plug-and-Play Capability Connecting Your DevicesExamples of connection with a computer Scart Examples of connection with a VCR/DVD PlayerConnecting The Power Supply About The Laser Pointer Remote ControlInstalling Batteries Using The Remote ID Feature Operating The Remote ControlUsing The Mouse/Keyboard Control Function Turning Off The Power Power On/OffTurning On The Power Operating Selecting An Input SignalAt a RGB signal Using The Automatic Adjustment FeatureAt a M1-D signal At a RGB signal not M1-D At a video signalCorrecting The Keystone Distortion Adjusting The Picture PositionTemporarily Blanking The Screen Adjusting The VolumeMuting The Sound Freezing The Screen Using The Magnify FeatureSelecting An Audio Input Displaying The Child WindowEx. Turning off the built-in speaker Multifunctional SettingsUsing The Menu Functions Main Menu Custom Menu PICTURE-1 MenuMY Memory PICTURE-2 Menu Input Menu P. Posit PowerupP. Input Video  S-VIDEOAuto Menu AdjustPower OFF Power onRGB BNC Video  S-VIDEO  Component SearchMenu Position Screen MenuBlank Start UPMessage How to register your picture as the MyScreenOption Menu Service Menu Dhcp SetupNetwork Menu Ex. Case of IP Address = Network Setting UpWhen you use a Network unsuitable to the Dhcp function About disposal of a lamp LampReplacing The Lamp Case of replacement by yourselfCaring For The Air Filter Air FilterCaring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingRegarding The Indicator Lamps Cooling fan is not operating It is time to clean the air filter, or there is no airEither there is no lamp and/or lamp cover, or Either of these has not been properly fixedPhenomena That May Easily Be Mistaken For Machine Defects Tion such as by a power outage blackout, etcVolume is adjusted to an extremely low level This specifications are subject to change without notice SpecificationsCountry/Region Web site = Telephone Customer SupportWhat the warranty does not cover What the warranty coversHow long the warranty is effective Who the warranty protectsPage Sales outside the U.S.A. and Canada Limitation of implied warrantiesExclusion of damages Effect of state law