Adjusting The Picture Position
memo This function is available only for RGB signals.
1Press the POSITION button.
As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the picture position.
2Use the cursor buttons S/T/W/X to adjust the position.
memo When you want to initialize the position, press the RESET button during adjustment.
3Press the POSITION button again to close the dialo and complete this operation.
memo Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
Correcting The Keystone Distortion
1Press the KEYSTONE button.
As illustrated on the right, a dialog will appear on the screen to aid you in correcting the keystone distortion.
2Use the cursor buttons W/X to select the direction of distortion to correct ( 
or 
).
3Use the cursor buttons S/T to correct the distortion.
4Press the KEYSTONE button again to close the dialog and complete this operation.
memo Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
Cursor buttons
POSITION button
RESET button
Cursor buttons
KEYSTONE button
ViewSonic PJ1172 | 16 |