ViewSonic PJ1172 manual Phenomena That May Easily Be Mistaken For Machine Defects

Page 47

Phenomena That May Easily Be Mistaken For Machine Defects

WARNING

Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquid or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet After making sure that the smoke or odor has stopped, contact your dealer or service company.

Before requesting repair, please check in accordance with the following chart. If the situation cannot be corrected, please contact your dealer or service company.

NOTE

•Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and such do not constitute or imply a machine defect.

Phenomenon

Cases not involving a machine defect

Reference

page(s)

 

 

 

 

 

 

The power cord is not plugged in.

9

 

Correctly connect the power cord.

 

 

The power switch is not set to the on position.

13

 

Set the power switch to [ ] (On).

 

 

The main power source has been interrupted during opera-

 

 

tion such as by a power outage (blackout), etc.

13

Power does not

Please turn the power off, and allow the unit to cool down at

come on

least 20 minutes. After the projector has sufficiently cooled

 

 

down, please turn the power on again.

 

 

Either there is no lamp and/or lamp cover, or either of these

 

 

has not been properly fixed.

 

 

Please turn the power off, and allow the unit to cool down at

35, 36

 

least 45 minutes. After the projector has sufficiently cooled

 

 

 

down, please make confirmation of the attachment state of the

 

 

lamp and lamp cover, and then turn the power on again.

 

 

 

 

 

The signal cables are not correctly connected.

6, 7, 8

 

Correctly connect the connection cables.

 

Neither sounds

Signal source does not correctly work.

6, 7, 8

nor pictures are

Correctly set up the signal source device by referring to the

outputted.

manual of the source device.

 

 

The input changeover settings are mismatched.

14

 

Select the input signal, and correct the settings.

 

(This table is continued to the following page.)

ViewSonic PJ1172

42

Page 46 Page 48
Image 47
Page 46 Page 48
Contents ViewSonic CE Conformity Compliance InformationImportant Safety Instructions For Your Records Electronic Warranty RegistrationContents Preparation Projector FeaturesProjector Front/Right Projector Rear/Left Part NamesProjector Control Buttons Remote ControlLaser Indicator Remote ControlSide View Reference for the 43 aspect ratio Setting UpArrangement Side ViewAdjusting The Projector’s Elevator Plug-and-Play Capability Connecting Your DevicesExamples of connection with a computer Scart Examples of connection with a VCR/DVD PlayerConnecting The Power Supply About The Laser Pointer Remote ControlInstalling Batteries Using The Remote ID Feature Operating The Remote ControlUsing The Mouse/Keyboard Control Function Turning Off The Power Power On/OffTurning On The Power Operating Selecting An Input SignalAt a RGB signal Using The Automatic Adjustment FeatureAt a M1-D signal At a RGB signal not M1-D At a video signalCorrecting The Keystone Distortion Adjusting The Picture PositionTemporarily Blanking The Screen Adjusting The VolumeMuting The Sound Freezing The Screen Using The Magnify FeatureSelecting An Audio Input Displaying The Child WindowEx. Turning off the built-in speaker Multifunctional SettingsUsing The Menu Functions Main Menu Custom Menu PICTURE-1 MenuMY Memory PICTURE-2 Menu Input Menu P. Posit PowerupP. Input Video  S-VIDEOAuto Menu AdjustPower OFF Power onRGB BNC Video  S-VIDEO  Component SearchMenu Position Screen MenuBlank Start UPMessage How to register your picture as the MyScreenOption Menu Service Menu Dhcp SetupNetwork Menu Ex. Case of IP Address = Network Setting UpWhen you use a Network unsuitable to the Dhcp function About disposal of a lamp LampReplacing The Lamp Case of replacement by yourselfCaring For The Air Filter Air FilterCaring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingRegarding The Indicator Lamps Cooling fan is not operating It is time to clean the air filter, or there is no airEither there is no lamp and/or lamp cover, or Either of these has not been properly fixedPhenomena That May Easily Be Mistaken For Machine Defects Tion such as by a power outage blackout, etcVolume is adjusted to an extremely low level This specifications are subject to change without notice SpecificationsCountry/Region Web site = Telephone Customer SupportWhat the warranty does not cover What the warranty coversHow long the warranty is effective Who the warranty protectsPage Sales outside the U.S.A. and Canada Limitation of implied warrantiesExclusion of damages Effect of state law
Top Page Image Contents