ViewSonic PJ1172 manual Operating, Selecting An Input Signal

Page 19

Operating

Selecting An Input Signal

1Select an input signal.

Using the INPUT dial

Turn the INPUT dial of the projector.

Turning the dial cycles through the input ports as shown below. Select the signal you wish to project.

Using SEARCH button

Press the SEARCH button of the projector or the remote control.

Pressing the button automatically cycles through input ports and displays the picture of retrieved signal.

memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will turn to the state it was in prior to the search.

Using RGB button

Press the RGB button of the remote control. Pressing the button toggles between the RGB ports as shown below Select the signal you wish to project.

Using VIDEO button

Press the VIDEO button of the remote control. Pressing the button toggles between the VIDEO ports as shown below Select the signal you wish to project.

2Use the ZOOM buttons to adjust the screen size.

3Use the FOCUS buttons to adjust the focus.

SEARCH button

INPUT dial

VIDEO button

RGB button

SEARCH button

ZOOM FOCUS

buttons buttons

ViewSonic PJ1172

14

Image 19

Contents ViewSonic CE Conformity Compliance InformationImportant Safety Instructions For Your Records Electronic Warranty RegistrationContents Preparation Projector FeaturesProjector Part NamesProjector Front/Right Projector Rear/Left Control Buttons Remote ControlLaser Indicator Remote ControlSide View Reference for the 43 aspect ratio Setting UpArrangement Side ViewAdjusting The Projector’s Elevator Plug-and-Play Capability Connecting Your DevicesExamples of connection with a computer Scart Examples of connection with a VCR/DVD PlayerConnecting The Power Supply Installing Batteries Remote ControlAbout The Laser Pointer Using The Remote ID Feature Operating The Remote ControlUsing The Mouse/Keyboard Control Function Turning On The Power Power On/OffTurning Off The Power Operating Selecting An Input SignalAt a RGB signal Using The Automatic Adjustment FeatureAt a M1-D signal At a RGB signal not M1-D At a video signalCorrecting The Keystone Distortion Adjusting The Picture PositionMuting The Sound Adjusting The VolumeTemporarily Blanking The Screen Freezing The Screen Using The Magnify FeatureSelecting An Audio Input Displaying The Child WindowUsing The Menu Functions Multifunctional SettingsEx. Turning off the built-in speaker Main Menu Custom Menu PICTURE-1 MenuMY Memory PICTURE-2 Menu Input Menu P. Posit PowerupP. Input Video  S-VIDEOAuto Menu AdjustPower OFF Power onRGB BNC Video  S-VIDEO  Component SearchMenu Position Screen MenuBlank Start UPMessage How to register your picture as the MyScreenOption Menu Service Menu Network Menu SetupDhcp When you use a Network unsuitable to the Dhcp function Network Setting UpEx. Case of IP Address = About disposal of a lamp LampReplacing The Lamp Case of replacement by yourselfCaring For The Air Filter Air FilterCaring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingRegarding The Indicator Lamps Cooling fan is not operating It is time to clean the air filter, or there is no airEither there is no lamp and/or lamp cover, or Either of these has not been properly fixedPhenomena That May Easily Be Mistaken For Machine Defects Tion such as by a power outage blackout, etcVolume is adjusted to an extremely low level This specifications are subject to change without notice SpecificationsCountry/Region Web site = Telephone Customer SupportWhat the warranty does not cover What the warranty coversHow long the warranty is effective Who the warranty protectsPage Sales outside the U.S.A. and Canada Limitation of implied warrantiesExclusion of damages Effect of state law