ViewSonic PJ1172 manual Multifunctional Settings, Using The Menu Functions

Multifunctional Settings

Using The Menu Functions

This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, SCREEN, OPTION and NETWORK. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.

1Press the MENU button. The menu will

	appear on the screen.	Cursor
2	Use the cursor	buttons
	buttons S/T to
	select a menu, then	MENU
	press the X (or the	button
	ENTER) button to
	progress.	RESET
	The display of the	button
	selected menu will
	appear.	ESC
3	Use the cursor	button
	buttons S/T to
	select an item, then
	press the X (or the
	ENTER) button to	X/
	progress.	ENTER
	The operation display	button

of the selected item will appear.

4Use the cursor buttons S/T to operate the item.

memo When you want to reset the adjustment, press the RESET button during the operation. Note that the items whose functions are performed simultaneously with operating (ex. LANGUAGE, WHISPER, H PHASE etc.) are not reset.

memo When you want to return to the previous display, press the W button or ESC button.

5Press the MENU button again to close the menu display and complete this operation. memo Even if you don’t do anything, the menu will automatically disappear after a few seconds.

ex. Turning off the built-in speaker

1)Press the MENU button.

2)Select the “OPTION” using the T button, then press the X button.

3)Select the “SPEAKER” using the T button, then press the X button.

4)Use the cursor button T to select the “TURN OFF”.

5) Press the MENU button again.

ViewSonic PJ1172 20