Eiki EIP-1600T owner manual Using the Options Menu

Using the “Options” Menu (Continued)

4Setting On-screen Display

Selectable	Description
items
On	All On-screen Displays are displayed.
Off	INPUT/FREEZE/AUTO SYNC/RESIZE/
	PICTURE MODE are not displayed.

5Setting the Video

System

This function can only be set in INPUT 3 or INPUT 4.

The video input system mode is factory preset to “Auto”;however, a clear picture from the con- nected audio-visual equipment may not be re- ceived, depending on the video signal difference. In that case, switch the video signal.

Selectable items	Description
PAL	When connected to PAL video
	equipment.
SECAM	When connected to SECAM
	video equipment.
NTSC4.43	When reproducing NTSC
	signals in PAL video equipment.
NTSC3.58	When connected to NTSC video
	equipment.

Menu operation n Page 41

6Signal Type Setting

This function allows you to select the input sig- nal type (RGB or Component) for INPUT 5 or INPUT 6.

Selectable items	Description
Auto	Automatically selects the
	appropriate input signal
	between RGB and Component.
RGB	Set when RGB signals are
	received.
Component	Set when component signals
	are received.

Note

•You can also select “Signal Type” using g RGB/COMP. on the remote control (INPUT 5 or INPUT 6).

7Selecting the HDMI Setting

When there is an HDMI-capable device con- nected to INPUT 6, an optimum picture may not be displayed if the device’s output signal type and the projector’s input signal type do not match. If this should occur, switch the HDMI Setting.

Selectable items	Description
Standard	When the black levels of the
	image show banding or appear
	faded, select the option that
	results in the best picture
Enhanced
	quality. (In most circumstances,
	“Standard” should be selected.)

Note

• The HDMI Setting can be selected only when INPUT 6 is selected.

8Selecting the Background

Image

Selectable items	Description
Blue	Blue screen
None	— (Black screen)

48

EIP-1600T_EN_k 48 06.1.24, 1:08 PM