Eiki EIP-1600T owner manual Removing and Installing the Lamp Unit, Disconnect the power cord

Page 59

Removing and Installing the Lamp Unit

Warning!

•The lamp unit becomes very hot while the pro- jector is operating. Do not remove the lamp unit from the projector right after use. The lamp and parts around the lamp will be very hot and may cause burns or injury.

Optional

Lamp unit

accessory

AH-11201

Info

•Make sure that you remove the lamp unit by the handle. Do not touch the glass surface of the lamp unit or the inside of the projector.

•To avoid injury to yourself and damage to the lamp, be sure to carefully follow the steps below.

•Do not loosen other screws except for the lamp unit cover and lamp unit.

1Press oSTANDBY-ON on the pro- jector or aSTANDBY on the re- mote control to put the projector into standby mode.

•Wait until the cooling fan stops.

2Disconnect the power cord.

•Unplug the power cord from the AC socket.

•Leave the lamp until it has fully cooled down (about 1 hour).

3Remove the lamp unit cover.

•Turn the projector over. Loosen the user service screw (1) that secures the lamp unit cover. Remove the lamp unit cover (2).

STANDBY-ON button

AC socket

1

2

User service screw (for lamp unit cover)

55

EIP-1600T_EN_l

55

06.1.24, 1:08 PM

Page 58 Page 60
Image 59
Page 58 Page 60
Contents EIP-1600T EIP-1600TENa 06.1.16, 906 AM Model No. EIP-1600T Serial No EIP-1600TENa 06.1.24, 100 PM Introduction Esperanza Rancho Santa Margarita, CA 92688-2132 TEL InformationFor Future Reference Using the Menu ScreenContents Reference Maintenance Maintenance Indicators Regarding the LampPower-Cord Protection CleaningAccessories Power SourcesOverloading Damage Requiring ServiceReplacement Parts Safety CheckDo not block the exhaust and intake vents Rest your eyes occasionallyPerature Other connected equipment Using the projector in other countriesTemperature monitor function Optional accessory AccessoriesProjector Power IndicatorFocus ring For adjusting the focus Part Names and FunctionsRear View Part Names and FunctionsUsing the Kensington Lock on the projector Attach the cover and slide it until it clicks into place Inserting the BatteriesUsable Range Quick Start Setup and ProjectionAdjust the focus, image size, and projector angle PP Ceiling-mount Setup Setting up the ProjectorSetting up the Projector Standard Setup Front Projection174⋅98 Projection PRJ ModePicture Screen Size and Projection Distance Setting up the ProjectorWhen using a wide screen 169 and projecting 169 image When using a normal screen 43 and projecting 169 image Samples of Cables for Connection Connecting to Video Equipment Video cable Connecting to Video EquipmentWhen connecting to equipment with Hdmi output teminal INPUT6 To INPUT5 terminal RGB cable commercially available Connecting to a ComputerComputer To RGB output terminal To RS-232C terminal Controlling the Projector by a ComputerTurning the Projector on Connecting the Power CordLamp indicator Power indicator STANDBY-ON button On button Turning the Projector On/OffOutlet after the cooling fan stops Switching the Input ModeUnplug the power cord from the AC Image ProjectionRotate the zoom ring to enlarge or shrink the screen size Adjusting the Projected ImageAdjust lever Make small adjustments Image ProjectionUse the rear adjustment foot to make the projector level Correcting Trapezoidal Distortion Projected image Display disappearsFor correcting an image by Designating the cornerLower right and lower left Image Repeat the same procedure withPress i Enter to set the posi- tion Positions for the upper rightKeystone On the projector On the remote control Resize button Resize ModeComputer About CopyrightsShifting the Projected Im- age Vertically Image Shift Operating with the Remote ControlSwitching the Iris Setting Selecting the Picture ModePicture menu Menu ItemsFine Sync menu Menu ItemsPress dMENU Using the Menu ScreenMenu Selections Adjustments Icon to adjustPress O or Q to adjust the item selected Using the Menu ScreenTo adjust the projected image while watching it Press P or R to select the item to adjustMenu operation n Picture Adjustment Picture menu1Selecting the Picture Mode 2Adjusting the ImageProgressive Picture Adjustment Picture menu3Adjusting the Color Temperature 4Adjusting the Colors8Lamp Setting 6Reducing Image Noise 7Switching the IrisSetting 4Checking the Input Signal 1Adjusting Computer Image2Special Modes Setting 3Auto Sync Auto Sync AdjustmentButton Using the Options Menu1Adjusting the Image Position 2Adjusting the OverscanUsing the Options Menu Reversing/Inverting Projected Images 9Auto Power Off Function0Checking the Lamp Life Status 6Selecting the On-screen Display Language 4Fan Mode Setting5Returning to the Default Settings 2Selectingthe Transmission Speed RS-232CCleaning the projector MaintenanceTemperature warning indicator Lamp indicator Power indicator Maintenance IndicatorsOff Replacing the Lamp Regarding the LampLamp Remove the lamp unit cover Removing and Installing the Lamp UnitDisconnect the power cord Regarding the Lamp Resetting the Lamp TimerGND Connecting Pin AssignmentsR Return code 0DH RS-232C Specifications and Command SettingsConnecting Pin Assignments Return code 0DHVesa Hdmi Computer Compatibility Chart23-27 TroubleshootingBlack levels Product type Projector Model EIP-1600T Video system SpecificationsDimensions Index Japan & Worldwide CanadaEastern Europe Deutschland & Österreich

EIP-1600T specifications

The Eiki EIP-1600T is an advanced, high-performance projector designed to meet the needs of educational institutions, corporate environments, and large venues. This model stands out for its exceptional image quality, versatile connectivity options, and user-friendly features, making it a popular choice for various presentation settings.

One of the main features of the EIP-1600T is its impressive brightness level, boasting up to 6,000 ANSI lumens. This level of brightness enables clear and vivid projections even in well-lit rooms, ensuring that presentations remain visible without the need to dim ambient light. The projector also offers a full HD resolution of 1920 x 1080 pixels, which allows for sharp images and detailed visuals that enhance the viewing experience.

In terms of technology, the Eiki EIP-1600T utilizes DLP (Digital Light Processing) technology, which is renowned for its reliability and superior color accuracy. This feature ensures that colors are vibrant and lifelike, making it ideal for displaying multimedia content, including videos, images, and presentations. Additionally, the DLP chip used in this projector guarantees a longer lifespan compared to other projection technologies, delivering longevity and consistent performance.

Connectivity is another strong point of the EIP-1600T. The projector is equipped with multiple input options, including HDMI, VGA, composite video, and USB ports. These versatile connectivity options make it compatible with a wide range of devices, from laptops to media players, allowing presenters to switch between sources seamlessly. Furthermore, the projector supports wireless connectivity through optional adapters, enabling users to project content from smartphones, tablets, or laptops without the hassle of tangled cables.

The EIP-1600T also incorporates user-friendly features such as a built-in speaker and a comprehensive remote control. The onboard speaker produces adequate sound for small to medium-sized rooms, enhancing the overall presentation experience. The intuitive remote makes navigating menus and adjusting settings easy, thus simplifying the setup process.

In conclusion, the Eiki EIP-1600T is a powerful projector that combines high brightness, excellent resolution, and versatile connectivity, making it suitable for a variety of applications. Its robust construction and user-friendly features further contribute to its appeal, ensuring reliable performance in any professional setting. Companies and educational institutions looking for a dependable, high-quality projection solution will find the EIP-1600T to be a valuable asset.
Top Page Image Contents