Eiki EIP-1600T owner manual Regarding the Lamp, Resetting the Lamp Timer

Page 60

Regarding the Lamp (Continued)

4 Remove the lamp unit.

Handle

• Loosen the securing screws from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow. At this time, keep the lamp unit horizontal and do not tilt it.

5 Insert the new lamp unit.

•Press the lamp unit firmly into the lamp unit compartment. Fasten the securing screws.

6 Replace the lamp unit cover.

•Align the tab on the lamp unit cover (1) and place it while pressing the tab (2) to close it. Then tighten the user service screw to secure the lamp unit cover.

Info

•If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is con- nected to the projector.

Securing screws

2

1

Resetting the Lamp Timer

Reset the lamp timer after replacing the lamp.

Info

•Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use the same lamp, this may cause the lamp to become damaged or ex- plode.

1Connect the power cord.

•Plug the power cord into the AC socket of the projector.

2Reset the lamp timer.

•While simultaneously holding down rMENU, pENTER and R on the projec- tor, press oSTANDBY-ON on the projec- tor.

•“LAMP 0000H” is displayed, indicating that the lamp timer is reset.

56

AC socket

STANDBY-ON button

ENTER button

MENU button

R button

EIP-1600T_EN_l

56

06.1.24, 1:09 PM

Page 59 Page 61
Image 60
Page 59 Page 61
Contents EIP-1600T EIP-1600TENa 06.1.16, 906 AM Model No. EIP-1600T Serial No EIP-1600TENa 06.1.24, 100 PM Introduction Information Esperanza Rancho Santa Margarita, CA 92688-2132 TELUsing the Menu Screen For Future ReferenceContents Maintenance Maintenance Indicators Regarding the Lamp ReferenceCleaning AccessoriesPower Sources Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check OverloadingRest your eyes occasionally PeratureDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment Accessories Optional accessoryPower Indicator Focus ring For adjusting the focusPart Names and Functions ProjectorPart Names and Functions Rear ViewUsing the Kensington Lock on the projector Inserting the Batteries Attach the cover and slide it until it clicks into placeUsable Range Setup and Projection Quick StartAdjust the focus, image size, and projector angle PP Setting up the Projector Setting up the ProjectorStandard Setup Front Projection Ceiling-mount SetupProjection PRJ Mode 174⋅98Setting up the Projector When using a wide screen 169 and projecting 169 imagePicture Screen Size and Projection Distance When using a normal screen 43 and projecting 169 image Samples of Cables for Connection Connecting to Video Equipment Connecting to Video Equipment Video cableWhen connecting to equipment with Hdmi output teminal INPUT6 Connecting to a Computer Computer To RGB output terminalTo INPUT5 terminal RGB cable commercially available Controlling the Projector by a Computer To RS-232C terminalConnecting the Power Cord Lamp indicator Power indicator STANDBY-ON button On buttonTurning the Projector On/Off Turning the Projector onSwitching the Input Mode Unplug the power cord from the ACImage Projection Outlet after the cooling fan stopsAdjusting the Projected Image Adjust lever Make small adjustmentsImage Projection Rotate the zoom ring to enlarge or shrink the screen sizeUse the rear adjustment foot to make the projector level Correcting Trapezoidal Distortion Display disappears For correcting an image byDesignating the corner Projected imageRepeat the same procedure with Press i Enter to set the posi- tionPositions for the upper right Lower right and lower left ImageKeystone Resize Mode On the projector On the remote control Resize buttonAbout Copyrights ComputerOperating with the Remote Control Switching the Iris SettingSelecting the Picture Mode Shifting the Projected Im- age Vertically Image ShiftMenu Items Picture menuMenu Items Fine Sync menuUsing the Menu Screen Menu Selections AdjustmentsIcon to adjust Press dMENUUsing the Menu Screen To adjust the projected image while watching itPress P or R to select the item to adjust Press O or Q to adjust the item selectedPicture Adjustment Picture menu 1Selecting the Picture Mode2Adjusting the Image Menu operation nPicture Adjustment Picture menu 3Adjusting the Color Temperature4Adjusting the Colors Progressive6Reducing Image Noise 7Switching the Iris Setting8Lamp Setting 1Adjusting Computer Image 2Special Modes Setting3Auto Sync Auto Sync Adjustment 4Checking the Input SignalUsing the Options Menu 1Adjusting the Image Position2Adjusting the Overscan ButtonUsing the Options Menu 9Auto Power Off Function 0Checking the Lamp Life StatusReversing/Inverting Projected Images 4Fan Mode Setting 5Returning to the Default Settings2Selectingthe Transmission Speed RS-232C 6Selecting the On-screen Display LanguageMaintenance Cleaning the projectorMaintenance Indicators Temperature warning indicator Lamp indicator Power indicatorOff Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Disconnect the power cordRemove the lamp unit cover Resetting the Lamp Timer Regarding the LampConnecting Pin Assignments GNDRS-232C Specifications and Command Settings Connecting Pin AssignmentsReturn code 0DH R Return code 0DHComputer Compatibility Chart Vesa HdmiTroubleshooting 23-27Black levels Specifications Product type Projector Model EIP-1600T Video systemDimensions Index Canada Eastern EuropeDeutschland & Österreich Japan & Worldwide

EIP-1600T specifications

The Eiki EIP-1600T is an advanced, high-performance projector designed to meet the needs of educational institutions, corporate environments, and large venues. This model stands out for its exceptional image quality, versatile connectivity options, and user-friendly features, making it a popular choice for various presentation settings.

One of the main features of the EIP-1600T is its impressive brightness level, boasting up to 6,000 ANSI lumens. This level of brightness enables clear and vivid projections even in well-lit rooms, ensuring that presentations remain visible without the need to dim ambient light. The projector also offers a full HD resolution of 1920 x 1080 pixels, which allows for sharp images and detailed visuals that enhance the viewing experience.

In terms of technology, the Eiki EIP-1600T utilizes DLP (Digital Light Processing) technology, which is renowned for its reliability and superior color accuracy. This feature ensures that colors are vibrant and lifelike, making it ideal for displaying multimedia content, including videos, images, and presentations. Additionally, the DLP chip used in this projector guarantees a longer lifespan compared to other projection technologies, delivering longevity and consistent performance.

Connectivity is another strong point of the EIP-1600T. The projector is equipped with multiple input options, including HDMI, VGA, composite video, and USB ports. These versatile connectivity options make it compatible with a wide range of devices, from laptops to media players, allowing presenters to switch between sources seamlessly. Furthermore, the projector supports wireless connectivity through optional adapters, enabling users to project content from smartphones, tablets, or laptops without the hassle of tangled cables.

The EIP-1600T also incorporates user-friendly features such as a built-in speaker and a comprehensive remote control. The onboard speaker produces adequate sound for small to medium-sized rooms, enhancing the overall presentation experience. The intuitive remote makes navigating menus and adjusting settings easy, thus simplifying the setup process.

In conclusion, the Eiki EIP-1600T is a powerful projector that combines high brightness, excellent resolution, and versatile connectivity, making it suitable for a variety of applications. Its robust construction and user-friendly features further contribute to its appeal, ensuring reliable performance in any professional setting. Companies and educational institutions looking for a dependable, high-quality projection solution will find the EIP-1600T to be a valuable asset.
Top Page Image Contents