Eiki owner manual Specifications, Product type Projector Model EIP-1600T Video system

Page 66

Specifications

Product type

Projector

 

Model

EIP-1600T

 

Video system

NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/

 

DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50

Display method

Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments

DMD panel

Panel size: 0.65", 1chip DMD

 

Drive method: Digital Light Processing (DLP™)

 

No. of dots: 983,040 dots (1280 [H] ⋅ 768 [V])

Lens

1–1.15 ⋅ zoom lens, F2.4–2.6, f = 19.0–21.9 mm

Projection lamp

275 W DC lamp

 

Component input signal

RCA connector

 

(INPUT1/2)

Y: 1.0 Vp-p, sync negative, 75 Ω terminated

 

PB (CB): 0.7 Vp-p, 75 Ω terminated

 

PR (CR): 0.7 Vp-p, 75 Ω terminated

S-video input signal

4-pin mini DIN connector

(INPUT 3)

Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated

 

C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated

Video input signal

RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω

(INPUT 4)

terminated

 

Computer RGB/

15-pin mini D-sub connector

Component input signal

RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated

(INPUT 5)

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)

 

VERTICAL SYNC. SIGNAL: Same as above

HDMI input signal

HDMI terminal (video signal only)

(INPUT 6)

 

 

Horizontal resolution

720 TV lines (DTV720P)

Vertical frequency

45–85 Hz

 

Horizontal frequency

15–70 kHz

 

Pixel clock

12–85 MHz

 

RS-232C terminal

9-pin mini DIN connector

TRIGGER terminal

Power jack: DC 12V output

Rated voltage

AC 100–240 V

 

Input current

3.7 A

 

Rated frequency

50/60 Hz

 

Power consumption

355 W (Lamp Setting

“Bright”)/

 

310 W (Lamp Setting

“Eco + Quiet”) with AC 100 V

 

340 W (Lamp Setting

“Bright”)/

 

300 W (Lamp Setting

“Eco + Quiet”) with AC 240 V

Power consumption (standby) 4 W (AC 100 V) – 5 W (AC 240 V)*1

Heat dissipation

1,335 BTU/hour (Lamp Setting “Bright”)/

 

1,165 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 100 V

 

1,280 BTU/hour (Lamp Setting “Bright”)/

 

1,130 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 240 V

Operating temperature

41°F to 95°F (+5°C to +35°C)

Storage temperature

–4°F to 140°F (–20°C to +60°C)

Cabinet

Plastic

 

I/R carrier frequency

38 kHz

 

Dimensions (approx.)

12 13/32" ⋅ 4 19/64" ⋅ 11 1/32" (315 (W) ⋅ 109 (H) ⋅ 280 (D) mm) (main body only)

 

12 13/32" ⋅ 4 47/64" ⋅ 11 37/64" (315 (W) ⋅ 120 (H) ⋅ 294 (D) mm) (including adjust-

 

ment foot and projecting parts)

Weight (approx.)

8.8 lbs. (4.0 kg)

 

Replacement parts

Remote control, Power cord for U.S. and Canada, etc., Power cord for Europe,

 

except U.K., Video cable, DIN-D-sub RS-232C adaptor, Quick Guide, Owner’s

 

manual

 

*1 When STANDBY Mode is set to “Eco”

As a part of policy of continuous improvement, EIKI reserves the right to make design and specification changes for product improvement without prior notice. The performance specifica- tion figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

62

EIP-1600T_EN_m

62

06.1.24, 1:09 PM

Page 65 Page 67
Image 66
Page 65 Page 67
Contents EIP-1600T EIP-1600TENa 06.1.16, 906 AM Model No. EIP-1600T Serial No EIP-1600TENa 06.1.24, 100 PM Introduction Information Esperanza Rancho Santa Margarita, CA 92688-2132 TELUsing the Menu Screen For Future ReferenceContents Maintenance Maintenance Indicators Regarding the Lamp ReferencePower Sources CleaningAccessories Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingRest your eyes occasionally PeratureDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment Accessories Optional accessoryPart Names and Functions Power IndicatorFocus ring For adjusting the focus ProjectorPart Names and Functions Rear ViewUsing the Kensington Lock on the projector Inserting the Batteries Attach the cover and slide it until it clicks into placeUsable Range Setup and Projection Quick StartAdjust the focus, image size, and projector angle PP Standard Setup Front Projection Setting up the ProjectorSetting up the Projector Ceiling-mount SetupProjection PRJ Mode 174⋅98Setting up the Projector When using a wide screen 169 and projecting 169 imagePicture Screen Size and Projection Distance When using a normal screen 43 and projecting 169 image Samples of Cables for Connection Connecting to Video Equipment Connecting to Video Equipment Video cableWhen connecting to equipment with Hdmi output teminal INPUT6 Connecting to a Computer Computer To RGB output terminalTo INPUT5 terminal RGB cable commercially available Controlling the Projector by a Computer To RS-232C terminalTurning the Projector On/Off Connecting the Power CordLamp indicator Power indicator STANDBY-ON button On button Turning the Projector onImage Projection Switching the Input ModeUnplug the power cord from the AC Outlet after the cooling fan stopsImage Projection Adjusting the Projected ImageAdjust lever Make small adjustments Rotate the zoom ring to enlarge or shrink the screen sizeUse the rear adjustment foot to make the projector level Correcting Trapezoidal Distortion Designating the corner Display disappearsFor correcting an image by Projected imagePositions for the upper right Repeat the same procedure withPress i Enter to set the posi- tion Lower right and lower left ImageKeystone Resize Mode On the projector On the remote control Resize buttonAbout Copyrights ComputerSelecting the Picture Mode Operating with the Remote ControlSwitching the Iris Setting Shifting the Projected Im- age Vertically Image ShiftMenu Items Picture menuMenu Items Fine Sync menuIcon to adjust Using the Menu ScreenMenu Selections Adjustments Press dMENUPress P or R to select the item to adjust Using the Menu ScreenTo adjust the projected image while watching it Press O or Q to adjust the item selected2Adjusting the Image Picture Adjustment Picture menu1Selecting the Picture Mode Menu operation n4Adjusting the Colors Picture Adjustment Picture menu3Adjusting the Color Temperature Progressive6Reducing Image Noise 7Switching the Iris Setting8Lamp Setting 3Auto Sync Auto Sync Adjustment 1Adjusting Computer Image2Special Modes Setting 4Checking the Input Signal2Adjusting the Overscan Using the Options Menu1Adjusting the Image Position ButtonUsing the Options Menu 9Auto Power Off Function 0Checking the Lamp Life StatusReversing/Inverting Projected Images 2Selectingthe Transmission Speed RS-232C 4Fan Mode Setting5Returning to the Default Settings 6Selecting the On-screen Display LanguageMaintenance Cleaning the projectorMaintenance Indicators Temperature warning indicator Lamp indicator Power indicatorOff Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Disconnect the power cordRemove the lamp unit cover Resetting the Lamp Timer Regarding the LampConnecting Pin Assignments GNDReturn code 0DH RS-232C Specifications and Command SettingsConnecting Pin Assignments R Return code 0DHComputer Compatibility Chart Vesa HdmiTroubleshooting 23-27Black levels Specifications Product type Projector Model EIP-1600T Video systemDimensions Index Deutschland & Österreich CanadaEastern Europe Japan & Worldwide

EIP-1600T specifications

The Eiki EIP-1600T is an advanced, high-performance projector designed to meet the needs of educational institutions, corporate environments, and large venues. This model stands out for its exceptional image quality, versatile connectivity options, and user-friendly features, making it a popular choice for various presentation settings.

One of the main features of the EIP-1600T is its impressive brightness level, boasting up to 6,000 ANSI lumens. This level of brightness enables clear and vivid projections even in well-lit rooms, ensuring that presentations remain visible without the need to dim ambient light. The projector also offers a full HD resolution of 1920 x 1080 pixels, which allows for sharp images and detailed visuals that enhance the viewing experience.

In terms of technology, the Eiki EIP-1600T utilizes DLP (Digital Light Processing) technology, which is renowned for its reliability and superior color accuracy. This feature ensures that colors are vibrant and lifelike, making it ideal for displaying multimedia content, including videos, images, and presentations. Additionally, the DLP chip used in this projector guarantees a longer lifespan compared to other projection technologies, delivering longevity and consistent performance.

Connectivity is another strong point of the EIP-1600T. The projector is equipped with multiple input options, including HDMI, VGA, composite video, and USB ports. These versatile connectivity options make it compatible with a wide range of devices, from laptops to media players, allowing presenters to switch between sources seamlessly. Furthermore, the projector supports wireless connectivity through optional adapters, enabling users to project content from smartphones, tablets, or laptops without the hassle of tangled cables.

The EIP-1600T also incorporates user-friendly features such as a built-in speaker and a comprehensive remote control. The onboard speaker produces adequate sound for small to medium-sized rooms, enhancing the overall presentation experience. The intuitive remote makes navigating menus and adjusting settings easy, thus simplifying the setup process.

In conclusion, the Eiki EIP-1600T is a powerful projector that combines high brightness, excellent resolution, and versatile connectivity, making it suitable for a variety of applications. Its robust construction and user-friendly features further contribute to its appeal, ensuring reliable performance in any professional setting. Companies and educational institutions looking for a dependable, high-quality projection solution will find the EIP-1600T to be a valuable asset.
Top Page Image Contents