Eiki XG-705A Wired LAN Configurations, Connecting to the LAN Line, Network Environment Settings

Page 26

4. Wired LAN Configurations

Setting procedures and contents differ depending on the LAN installation location. When installing, consult your system administrator to set up the LAN appropriately.

Connecting to the LAN Line

Connect the LAN cable to the LAN connection terminal of the projector.

LAN Connection Terminal

USB

Link Lamp (Orange) Light orange when the terminal is correctly connected to the Network HUB with the LAN cable.

Access Lamp (Green)

Blink green when

exchanging data with the network.

* When the LAN setting is "Off", the two lamps will

not be on.

LAN Cable

Network Environment Settings

Set the Wired LAN network through the projector menu.

Detailed network settings will be made with browser. Refer to "6. Configurations with Browser". (p39-54)

First, complete the settings described in this chapter before performing steps in "6. Configurations with Browser".

Setting Procedure

1.Turn on the projector and select "Wired" from the input menu of the projector.

The projector's Link Lamp will be on and the Access Lamp will start to blink. If the "LAN setting" is "Off", it will not blink. Follow step 2 and 3 to blink the lamp.

2.Select "Wired Setting" in the projector menu, and press the SELECT button.

Select similar LAN environment among LAN1, 2 and 3 with the Point 7 8 buttons. (LAN1, 2, and 3 are the factory default setting environments. You can select three different environment among setting LAN1-3. For each setting, refer to the chart on page 31.)

When selecting "Off" in the "Wired setting", the LAN connection will be cut off. Use the function when disconnecting the projector from the network.

3.Press the Point button then "Please wait..." message will appear and switching operation will start. Switching will take a while and after completing the operation, the "Ready for use" message will appear. During the switching period, the projector cannot be operated.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Network Set-up Operation LAN adapter optionally available is requiredCompliance Federal Communication Commission NoticeTrademarks and Copyright Safety InstructionsUSB Wireless LAN Adapter Table of Contents Setting the Moderator Function Advanced SettingsChange Configuration Set Restart Easy Settings for Moderator FunctionOperating Environment and Configuration Required Operating Environment for ComputersNetwork Specifications of the Projector Modulation FormPage Chapter About LAN FunctionsImage Projecting System via LAN LAN Functions and the FeaturesAbout LAN Functions Flow of Image TransferAn Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Network Configuration has completed Setup ProceduresInstall the software on computers Installing the Software Setup Procedures Names and Functions of the Operation Screen Names and Functions of the Operation Screen Network Connection Standby DisplayNetworkModule Client Parts Names and Functions of the ScreenAdvanced Settings NetworkModule Moderator Page Wired LAN Configurations Network Environment Settings Wired LAN ConfigurationsConnecting to the LAN Line Setting ProcedureWired LAN Configurations Confirming the Operation English Wired Factory Default See the menu above User PIN CodeFactory Default Setting of the Wired LAN DNS Domain System Blank Password User PIN CodePage Wireless LAN Configurations Setting the Network Environment Wireless LAN ConfigurationsAttaching the USB Wireless LAN Adapter Setting ProceduresWireless LAN Configurations Easy Setting Computer environment and Wireless LAN connection Wireless InformationWireless Factory Default Wireless LAN Factory Default Settings Leap User Blank PasswordConfigurations with Browser Operation of Network ViewerIntroduction Configurations with BrowserBrowser Configuration Browser EnvironmentStarting up the Browser Screen of Wireless LAN Screen of Wired LAN InformationParameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Wireless Setting Name and the passwordMail Admin Password Have entered is displayed as . up to ASCII32 charactersUser PIN code Moderator Login Password Figure will be displayed as . The password consistsMiscellaneous Change Configuration Set LAN1-5,.SIMPLERestart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Use the Moderator Function Moderator FunctionPreparation for Using the Moderator Function Preparation Procedure for Using the Moderator FunctionSetting the Moderator Function Registration of the ModeratorRegistration of the Clients Participants Project the Clients Images How to Use the Moderator FunctionUnregister from Moderator Status Stop Projecting the Clients ImagesHow to Use Network Viewer Wireless LAN Infrastructure Communication Mode How to Use Network ViewerMechanism of NetworkViewer and the Flow of the Signal Wireless LAN AdHoc Communication ModeFunctional Conditions of FTP Server Which Provides Images Wired LAN Communication ModeOperation Projecting the Image Operating with the PJ ControllerSpecify the FTP server to provide image data Operating with the Browser Refresh Wireless LAN Operating with the projectorSet timing to switch images in Auto play mode -240 sec Page How to Use the PJ Controller How to Use the PJ Controller How to OperateInitial Settings Mail Setting Registering E-mail AddressCheck Option items Enter the message to attach the E-mailPower & Status Turning on/off the projectorCheck the status of the projector Control InputPC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Service Confirm the actual adjustmentLoading the Set Select Set Number and name the settingSave the setting Set Multi Control Turn on or off the projector Appendix Appendix TroubleshootingWireless LAN Connection cannot be established Computer cannot connect projectorsWEP Network Viewer does not work with the projector operation Cannot start up the browserProjector / PJ Controller cannot be turned on/off Speed of playing back images are very slowTerminology Setting up the IP address with arp + pingcommand

XG-705A specifications

The Eiki XG-705A is a high-performance, versatile projector designed for various applications, ranging from corporate presentations to educational purposes. Known for its exceptional image quality and robust build, the XG-705A is a go-to choice for professionals seeking reliability and ease of use.

One of the standout features of the Eiki XG-705A is its powerful lamp, which delivers bright and vibrant images with a lumens rating that ensures clarity even in well-lit environments. The projector boasts a resolution of 1024 x 768 pixels, providing crisp images that enhance the viewing experience. This model is capable of projecting larger images without compromising on quality, making it ideal for larger venues.

The XG-705A employs advanced color technology, ensuring that colors are rich and accurate. Its high contrast ratio enhances the depth of images, resulting in superb visual performance that is vital for presentations and video content. The projector also supports a variety of image formats, making it compatible with different media sources.

In terms of connectivity, the Eiki XG-705A is equipped with multiple input options, including HDMI, VGA, and composite inputs, allowing seamless integration with computers, laptops, and media players. This extensive range of inputs makes it easy to switch between devices during presentations, increasing efficiency and ease of use.

The projector features integrated audio capabilities, providing sufficient sound quality without the need for external speakers during small to medium-sized meetings. For larger setups, audio outputs are available for connection to external sound systems.

A user-friendly interface and intuitive remote control add to the convenience of the XG-705A. The onboard menu system is easy to navigate, allowing users to adjust settings such as brightness, contrast, and aspect ratio with minimal effort.

Durability is another key characteristic of the Eiki XG-705A. Its rugged design ensures it can withstand the rigors of frequent transport and installation, making it suitable for rental or permanent installations. The projector's lamp life is impressive, reducing the frequency of replacements and ultimately lowering the total cost of ownership.

In summary, the Eiki XG-705A stands out in the projector market for its combination of brightness, versatility, and durability. With advanced color technology, multiple connectivity options, and ease of use, it is a reliable choice for anyone in need of a quality projection solution. Whether for business presentations or educational settings, the Eiki XG-705A is designed to deliver exceptional performance.
Top Page Image Contents