Eiki XG-705A owner manual Wireless LAN Configurations, Attaching the USB Wireless LAN Adapter

Page 34

5. Wireless LAN Configurations

Attaching the USB Wireless LAN Adapter

Insert the USB Wireless LAN Adapter into the USB terminal of the projector. Inserting the adapter after verifying the shape of the connector in order not to break the terminal.

CAUTION: Use specified USB Wireless LAN Adapter (Model : WL-30). If you use other product, the projector will not be operated properly.

USB Terminal

USB

USB Lamp

 

After the USB Wireless LAN

 

Adapter becomes ready for use,

 

the lamp will start to blink green

 

when receiving data.

 

USB Wireless LAN Adapter

 

Optionally available. (Model : WL-30)

Setting the Network Environment

Set the Wireless LAN network through the projector menu.

Detailed network settings will be made with browser. Refer to "6. Configurations with Browser". (p39-54) Complete the settings described in this chapter before performing the steps in "6 Configurations with Browser".

Setting Procedures

With Easy setting, you can make Wireless LAN settings easily without any complicating settings. (p36)

1.Turn on the projector and select "Wireless" from the input menu of the projector. The Network connection standby display will appear and "Please wait..." message will be displayed. Refer to "3.Names and Functions of the Operation Screen" ➔ "Network Connection Standby Display". (p20)

After short time, the message changes to " Ready for use". If the USB Wireless LAN Adapter is not attached to the projector, "Wireless" cannot be selected.

2.Select "Wireless Setting" from the projector menu and press the SELECT button.

Select similar environment between LAN 4 and LAN 5 with the Point 7 8 buttons. (LAN 4, LAN 5 and SIMPLE* are factory default settings. Select similar environment to the installation location. For each settings, refer to the chart on p38.)

✳"SIMPLE" mode is used for simple setting without complicated LAN setting procedures to connect to the Wireless LAN. See "Easy Setting" (p36-37) for details.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Network Set-up Operation LAN adapter optionally available is requiredCompliance Federal Communication Commission NoticeUSB Wireless LAN Adapter Safety InstructionsTrademarks and Copyright Table of Contents Setting the Moderator Function Advanced SettingsChange Configuration Set Restart Easy Settings for Moderator FunctionOperating Environment and Configuration Required Operating Environment for ComputersNetwork Specifications of the Projector Modulation FormPage Chapter About LAN FunctionsImage Projecting System via LAN LAN Functions and the FeaturesAbout LAN Functions Flow of Image TransferAn Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Install the software on computers Setup ProceduresNetwork Configuration has completed Installing the Software Setup Procedures Names and Functions of the Operation Screen Names and Functions of the Operation Screen Network Connection Standby DisplayNetworkModule Client Parts Names and Functions of the ScreenAdvanced Settings NetworkModule Moderator Page Wired LAN Configurations Network Environment Settings Wired LAN ConfigurationsConnecting to the LAN Line Setting ProcedureWired LAN Configurations Confirming the Operation English Wired Factory Default See the menu above User PIN CodeFactory Default Setting of the Wired LAN DNS Domain System Blank Password User PIN CodePage Wireless LAN Configurations Setting the Network Environment Wireless LAN ConfigurationsAttaching the USB Wireless LAN Adapter Setting ProceduresWireless LAN Configurations Easy Setting Wireless Factory Default Wireless InformationComputer environment and Wireless LAN connection Wireless LAN Factory Default Settings Leap User Blank PasswordConfigurations with Browser Operation of Network ViewerIntroduction Configurations with BrowserBrowser Configuration Browser EnvironmentStarting up the Browser Screen of Wireless LAN Screen of Wired LAN InformationParameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Wireless Setting Name and the passwordMail Admin Password Have entered is displayed as . up to ASCII32 charactersUser PIN code Moderator Login Password Figure will be displayed as . The password consistsMiscellaneous Change Configuration Set LAN1-5,.SIMPLERestart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Use the Moderator Function Moderator FunctionPreparation for Using the Moderator Function Preparation Procedure for Using the Moderator FunctionSetting the Moderator Function Registration of the ModeratorRegistration of the Clients Participants Project the Clients Images How to Use the Moderator FunctionUnregister from Moderator Status Stop Projecting the Clients ImagesHow to Use Network Viewer Wireless LAN Infrastructure Communication Mode How to Use Network ViewerMechanism of NetworkViewer and the Flow of the Signal Wireless LAN AdHoc Communication ModeOperation Wired LAN Communication ModeFunctional Conditions of FTP Server Which Provides Images Projecting the Image Operating with the PJ ControllerSpecify the FTP server to provide image data Operating with the Browser Refresh Wireless LAN Operating with the projectorSet timing to switch images in Auto play mode -240 sec Page How to Use the PJ Controller How to Use the PJ Controller How to OperateInitial Settings Mail Setting Registering E-mail AddressCheck Option items Enter the message to attach the E-mailPower & Status Turning on/off the projectorCheck the status of the projector Control InputPC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Service Confirm the actual adjustmentSave the setting Set Select Set Number and name the settingLoading the Set Multi Control Turn on or off the projector Appendix Appendix TroubleshootingWireless LAN Connection cannot be established Computer cannot connect projectorsWEP Network Viewer does not work with the projector operation Cannot start up the browserProjector / PJ Controller cannot be turned on/off Speed of playing back images are very slowTerminology Setting up the IP address with arp + pingcommand

XG-705A specifications

The Eiki XG-705A is a high-performance, versatile projector designed for various applications, ranging from corporate presentations to educational purposes. Known for its exceptional image quality and robust build, the XG-705A is a go-to choice for professionals seeking reliability and ease of use.

One of the standout features of the Eiki XG-705A is its powerful lamp, which delivers bright and vibrant images with a lumens rating that ensures clarity even in well-lit environments. The projector boasts a resolution of 1024 x 768 pixels, providing crisp images that enhance the viewing experience. This model is capable of projecting larger images without compromising on quality, making it ideal for larger venues.

The XG-705A employs advanced color technology, ensuring that colors are rich and accurate. Its high contrast ratio enhances the depth of images, resulting in superb visual performance that is vital for presentations and video content. The projector also supports a variety of image formats, making it compatible with different media sources.

In terms of connectivity, the Eiki XG-705A is equipped with multiple input options, including HDMI, VGA, and composite inputs, allowing seamless integration with computers, laptops, and media players. This extensive range of inputs makes it easy to switch between devices during presentations, increasing efficiency and ease of use.

The projector features integrated audio capabilities, providing sufficient sound quality without the need for external speakers during small to medium-sized meetings. For larger setups, audio outputs are available for connection to external sound systems.

A user-friendly interface and intuitive remote control add to the convenience of the XG-705A. The onboard menu system is easy to navigate, allowing users to adjust settings such as brightness, contrast, and aspect ratio with minimal effort.

Durability is another key characteristic of the Eiki XG-705A. Its rugged design ensures it can withstand the rigors of frequent transport and installation, making it suitable for rental or permanent installations. The projector's lamp life is impressive, reducing the frequency of replacements and ultimately lowering the total cost of ownership.

In summary, the Eiki XG-705A stands out in the projector market for its combination of brightness, versatility, and durability. With advanced color technology, multiple connectivity options, and ease of use, it is a reliable choice for anyone in need of a quality projection solution. Whether for business presentations or educational settings, the Eiki XG-705A is designed to deliver exceptional performance.
Top Page Image Contents