Eiki XG-705A owner manual Easy Setting, Setting Procedures

Page 36

5. Wireless LAN Configurations

Easy Setting

With this setting, you do not need any complex LAN setting procedures. The LAN mode will be AdHoc IEEE802.11b.

CAUTION: This function can be used only when logged in by Administrative right with Windows XP. Cannot be used with Windows98SE / Me, Windows2000. Windows XP should be Service Pack 1 or later version.

Setting Procedures

1.Turn on the projector and select "Wireless" from the input menu of the projector.

2.Select "Wireless Setting" from the projector menu and press the SELECT button.

3.Select "SIMPLE" with the Point 7 8 buttons. Press the Point button then "Please wait..." message will appear and switching operation will start. Switching will take a while and after completing the operation the message "Ready for use" will appear. During the switching period, the projector cannot be operated. ( "SIMPLE" LAN settings will be shown by pressing the SELECT button. The settings cannot be changed.)

4.Activate "NetworkModule Client" or " NetworkModule Moderator" which is installed in the computer.

5.Click the Easy setting button on the operation screen. The Wireless LAN setting screen will appear and the computer will start to set up the Wireless LAN setting. (Adjust the computer's Wireless LAN environment to the "SIMPLE" setting LAN environment.)

After completing the settings, the projector will start searching the projector which was set as "SIMPLE" and will display the name of the projector or the MAC address on the projector list.

Confirm whether the LAN has been set correctly and work properly. Refer to "4. Wired LAN configurations" ➔ "Confirming the Operation" (p28-29) for the confirmation procedures.

If the network setup is not succeeded, the error screen will appear.

Setting screen

Error screen

Easy setting button

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Network Set-up Operation LAN adapter optionally available is requiredCompliance Federal Communication Commission NoticeSafety Instructions USB Wireless LAN AdapterTrademarks and Copyright Table of Contents Advanced Settings Change Configuration Set RestartSetting the Moderator Function Easy Settings for Moderator FunctionOperating Environment and Configuration Required Operating Environment for ComputersNetwork Specifications of the Projector Modulation FormPage Chapter About LAN FunctionsLAN Functions and the Features About LAN FunctionsImage Projecting System via LAN Flow of Image TransferAn Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Setup Procedures Install the software on computersNetwork Configuration has completed Installing the Software Setup Procedures Names and Functions of the Operation Screen Names and Functions of the Operation Screen Network Connection Standby DisplayNetworkModule Client Parts Names and Functions of the ScreenAdvanced Settings NetworkModule Moderator Page Wired LAN Configurations Wired LAN Configurations Connecting to the LAN LineNetwork Environment Settings Setting ProcedureWired LAN Configurations Confirming the Operation English Wired Factory Default See the menu above User PIN CodeFactory Default Setting of the Wired LAN DNS Domain System Blank Password User PIN CodePage Wireless LAN Configurations Wireless LAN Configurations Attaching the USB Wireless LAN AdapterSetting the Network Environment Setting ProceduresWireless LAN Configurations Easy Setting Wireless Information Wireless Factory DefaultComputer environment and Wireless LAN connection Wireless LAN Factory Default Settings Leap User Blank PasswordConfigurations with Browser Operation of Network ViewerConfigurations with Browser Browser ConfigurationIntroduction Browser EnvironmentStarting up the Browser Screen of Wireless LAN Screen of Wired LAN InformationParameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Wireless Setting Name and the passwordMail Admin Password Have entered is displayed as . up to ASCII32 charactersUser PIN code Moderator Login Password Figure will be displayed as . The password consistsMiscellaneous Change Configuration Set LAN1-5,.SIMPLERestart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Use the Moderator Function Moderator FunctionPreparation for Using the Moderator Function Preparation Procedure for Using the Moderator FunctionSetting the Moderator Function Registration of the ModeratorRegistration of the Clients Participants How to Use the Moderator Function Unregister from Moderator StatusProject the Clients Images Stop Projecting the Clients ImagesHow to Use Network Viewer How to Use Network Viewer Mechanism of NetworkViewer and the Flow of the SignalWireless LAN Infrastructure Communication Mode Wireless LAN AdHoc Communication ModeWired LAN Communication Mode OperationFunctional Conditions of FTP Server Which Provides Images Projecting the Image Operating with the PJ ControllerSpecify the FTP server to provide image data Operating with the Browser Refresh Wireless LAN Operating with the projectorSet timing to switch images in Auto play mode -240 sec Page How to Use the PJ Controller How to Use the PJ Controller How to OperateInitial Settings Mail Setting Registering E-mail AddressCheck Option items Enter the message to attach the E-mailPower & Status Turning on/off the projectorCheck the status of the projector Control InputPC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Service Confirm the actual adjustmentSelect Set Number and name the setting Save the setting SetLoading the Set Multi Control Turn on or off the projector Appendix Troubleshooting Wireless LAN Connection cannot be establishedAppendix Computer cannot connect projectorsWEP Cannot start up the browser Projector / PJ Controller cannot be turned on/offNetwork Viewer does not work with the projector operation Speed of playing back images are very slowTerminology Setting up the IP address with arp + pingcommand

XG-705A specifications

The Eiki XG-705A is a high-performance, versatile projector designed for various applications, ranging from corporate presentations to educational purposes. Known for its exceptional image quality and robust build, the XG-705A is a go-to choice for professionals seeking reliability and ease of use.

One of the standout features of the Eiki XG-705A is its powerful lamp, which delivers bright and vibrant images with a lumens rating that ensures clarity even in well-lit environments. The projector boasts a resolution of 1024 x 768 pixels, providing crisp images that enhance the viewing experience. This model is capable of projecting larger images without compromising on quality, making it ideal for larger venues.

The XG-705A employs advanced color technology, ensuring that colors are rich and accurate. Its high contrast ratio enhances the depth of images, resulting in superb visual performance that is vital for presentations and video content. The projector also supports a variety of image formats, making it compatible with different media sources.

In terms of connectivity, the Eiki XG-705A is equipped with multiple input options, including HDMI, VGA, and composite inputs, allowing seamless integration with computers, laptops, and media players. This extensive range of inputs makes it easy to switch between devices during presentations, increasing efficiency and ease of use.

The projector features integrated audio capabilities, providing sufficient sound quality without the need for external speakers during small to medium-sized meetings. For larger setups, audio outputs are available for connection to external sound systems.

A user-friendly interface and intuitive remote control add to the convenience of the XG-705A. The onboard menu system is easy to navigate, allowing users to adjust settings such as brightness, contrast, and aspect ratio with minimal effort.

Durability is another key characteristic of the Eiki XG-705A. Its rugged design ensures it can withstand the rigors of frequent transport and installation, making it suitable for rental or permanent installations. The projector's lamp life is impressive, reducing the frequency of replacements and ultimately lowering the total cost of ownership.

In summary, the Eiki XG-705A stands out in the projector market for its combination of brightness, versatility, and durability. With advanced color technology, multiple connectivity options, and ease of use, it is a reliable choice for anyone in need of a quality projection solution. Whether for business presentations or educational settings, the Eiki XG-705A is designed to deliver exceptional performance.
Top Page Image Contents