Eiki XG-705A owner manual Safety Instructions, Trademarks and Copyright, USB Wireless LAN Adapter

Page 3

Safety Instructions

CAUTION IN USING THE PROJECTOR VIA NETWORKS

●When you find a problem with the projector, remove the power cable immediately and inspect the unit. Using the projector with failure may cause fire or other accidents.

●If you remotely use the projector via networks, carry out a safety check regularly and take particular care to its environment. Incorrect installation may cause fire or other accidents.

CAUTION IN USING NETWORK FUNCTION

●EIKI Co., Ltd. assumes no responsibility for the loss or damage of data, or damage of the computer caused by using this projector. Making back-up copies of valuable data in your computer is recommended.

Caution about Radio Wave

This unit operates in 2.4 GHz band, the same frequency band used for industrial, scientific, and medical equipment (such as pacemaker), as well as amateur radio stations.

Please read “Safety Instructions” section and make sure the following cautions.

1.Be sure that there are no other devices in the area that may use the same frequency band as Projector.

2.If any other devices are causing radio interferences, change the communication frequency channel or move to other location.

Trademarks and Copyright

Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Netscape Navigator and Netscape Communicator are registered trademarks or trademarks of Netscape Communications Corporation in the United States and other countries.

Pentium is a registered trademark of Intel Corp. in the United States.

Each name of corporation or product in this Owner’s Manual is either a registered trademark or a trademark of its respective corporation.

USB Wireless LAN Adapter

Use the optionally available USB Wireless LAN Adapter (Model : WL-30). If you use other product, the projector may not work properly.

The USB Wireless LAN Adapter is dedicated for our company's projectors. We cannot guarantee for using with other projectors.

Notes

●The contents of this manual are subject to change without notice.

●You may not copy the printed materials accompanying with the software.

●We shall not be responsible for any damages caused by reliance on this manual.

English

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents LAN adapter optionally available is required Network Set-up OperationFederal Communication Commission Notice ComplianceSafety Instructions USB Wireless LAN AdapterTrademarks and Copyright Table of Contents Easy Settings for Moderator Function Advanced SettingsChange Configuration Set Restart Setting the Moderator FunctionRequired Operating Environment for Computers Operating Environment and ConfigurationModulation Form Network Specifications of the ProjectorPage About LAN Functions ChapterFlow of Image Transfer LAN Functions and the FeaturesAbout LAN Functions Image Projecting System via LANAn Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Setup Procedures Install the software on computersNetwork Configuration has completed Installing the Software Setup Procedures Names and Functions of the Operation Screen Network Connection Standby Display Names and Functions of the Operation ScreenParts Names and Functions of the Screen NetworkModule ClientAdvanced Settings NetworkModule Moderator Page Wired LAN Configurations Setting Procedure Wired LAN ConfigurationsConnecting to the LAN Line Network Environment SettingsWired LAN Configurations Confirming the Operation English User PIN Code Wired Factory Default See the menu aboveDNS Domain System Blank Password User PIN Code Factory Default Setting of the Wired LANPage Wireless LAN Configurations Setting Procedures Wireless LAN ConfigurationsAttaching the USB Wireless LAN Adapter Setting the Network EnvironmentWireless LAN Configurations Easy Setting Wireless Information Wireless Factory DefaultComputer environment and Wireless LAN connection Leap User Blank Password Wireless LAN Factory Default SettingsOperation of Network Viewer Configurations with BrowserBrowser Environment Configurations with BrowserBrowser Configuration IntroductionStarting up the Browser Information Screen of Wireless LAN Screen of Wired LANParameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Name and the password Wireless SettingMail Have entered is displayed as . up to ASCII32 characters Admin PasswordUser PIN code Figure will be displayed as . The password consists Moderator Login PasswordMiscellaneous LAN1-5,.SIMPLE Change Configuration SetRestart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Moderator Function Use the Moderator FunctionPreparation Procedure for Using the Moderator Function Preparation for Using the Moderator FunctionRegistration of the Moderator Setting the Moderator FunctionRegistration of the Clients Participants Stop Projecting the Clients Images How to Use the Moderator FunctionUnregister from Moderator Status Project the Clients ImagesHow to Use Network Viewer Wireless LAN AdHoc Communication Mode How to Use Network ViewerMechanism of NetworkViewer and the Flow of the Signal Wireless LAN Infrastructure Communication ModeWired LAN Communication Mode OperationFunctional Conditions of FTP Server Which Provides Images Operating with the PJ Controller Projecting the ImageSpecify the FTP server to provide image data Operating with the Browser Refresh Operating with the projector Wireless LANSet timing to switch images in Auto play mode -240 sec Page How to Use the PJ Controller How to Operate How to Use the PJ ControllerInitial Settings Registering E-mail Address Mail SettingEnter the message to attach the E-mail Check Option itemsTurning on/off the projector Power & StatusCheck the status of the projector Input ControlPC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Confirm the actual adjustment ServiceSelect Set Number and name the setting Save the setting SetLoading the Set Multi Control Turn on or off the projector Appendix Computer cannot connect projectors TroubleshootingWireless LAN Connection cannot be established AppendixWEP Speed of playing back images are very slow Cannot start up the browserProjector / PJ Controller cannot be turned on/off Network Viewer does not work with the projector operationTerminology Setting up the IP address with arp + pingcommand

XG-705A specifications

The Eiki XG-705A is a high-performance, versatile projector designed for various applications, ranging from corporate presentations to educational purposes. Known for its exceptional image quality and robust build, the XG-705A is a go-to choice for professionals seeking reliability and ease of use.

One of the standout features of the Eiki XG-705A is its powerful lamp, which delivers bright and vibrant images with a lumens rating that ensures clarity even in well-lit environments. The projector boasts a resolution of 1024 x 768 pixels, providing crisp images that enhance the viewing experience. This model is capable of projecting larger images without compromising on quality, making it ideal for larger venues.

The XG-705A employs advanced color technology, ensuring that colors are rich and accurate. Its high contrast ratio enhances the depth of images, resulting in superb visual performance that is vital for presentations and video content. The projector also supports a variety of image formats, making it compatible with different media sources.

In terms of connectivity, the Eiki XG-705A is equipped with multiple input options, including HDMI, VGA, and composite inputs, allowing seamless integration with computers, laptops, and media players. This extensive range of inputs makes it easy to switch between devices during presentations, increasing efficiency and ease of use.

The projector features integrated audio capabilities, providing sufficient sound quality without the need for external speakers during small to medium-sized meetings. For larger setups, audio outputs are available for connection to external sound systems.

A user-friendly interface and intuitive remote control add to the convenience of the XG-705A. The onboard menu system is easy to navigate, allowing users to adjust settings such as brightness, contrast, and aspect ratio with minimal effort.

Durability is another key characteristic of the Eiki XG-705A. Its rugged design ensures it can withstand the rigors of frequent transport and installation, making it suitable for rental or permanent installations. The projector's lamp life is impressive, reducing the frequency of replacements and ultimately lowering the total cost of ownership.

In summary, the Eiki XG-705A stands out in the projector market for its combination of brightness, versatility, and durability. With advanced color technology, multiple connectivity options, and ease of use, it is a reliable choice for anyone in need of a quality projection solution. Whether for business presentations or educational settings, the Eiki XG-705A is designed to deliver exceptional performance.
Top Page Image Contents