Eiki XG-705A owner manual Wireless Setting, Name and the password

Page 47

6. Configurations with Browser

Wireless Setting

Wireless related items can be configured on this screen.

This screen will not be displayed at Wired LAN setting.

Parameter

Description

Wireless Mode

Select the Communication standard 802.11b or 802.11b.g

Network Type

Select either “Infrastructure” or “AdHoc”.

SSID*

Set the SSID/ESSID. (up to ASCII 32 characters)

 

SSID/ESSID is case-sensitive. Even though all characters on the

 

Wireless information is uppercase, it is necessary to distinguish

 

between upper case and lower case characters.

Channel

If you use the projector in 802.11AdHoc mode, select the channel, from 1 to

 

11.

WEP Security

Select "Enable" or "Disable" the WEP(encryption).

 

When using WEP, select any of following items corresponding to this

 

WEP; "Enable 40-bit", "Enable 104-bit", "Enable 128-bit" and "Enable

 

(802.1x"LEAP")"

 

When enabling WEP (Encryption), the image transfer speed may become

 

slower.

WEP Key#1- Key#4

Set WEP key in the hexadecimal notation (0 to F). 5 bytes are set for 40-

 

bit WEP, 13 bytes are set for 104-bit, and 16 bytes are set for 128-bit

 

WEP. Four WEP keys can be set, however, the only one with check on

 

its radio button is in effect. Both of the number and value of the WEP

 

key in effect must be same as those of your computer and the access

 

point.

 

Depending on computers and access points, you may be allowed to

 

select only one WEP key. In this case, use WEP key 1.

LEAP Username / Password

When selecting 802.1 x "LEAP" in WEP security, enter the user name

 

and the password. Enter with ASCII 64-byte capital characters and one-

 

byte characters. Consult your system administrator about the user

 

name and the password.

APPLY button

Click the APPLY button to update. The screen to restart the projector will be

 

displayed.

REFRESH button

Update and show the adjusted data.

RESTORE Factory Default Settings button....Restore the Wireless Settings to the values at the factory.

English

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents LAN adapter optionally available is required Network Set-up OperationFederal Communication Commission Notice ComplianceTrademarks and Copyright Safety InstructionsUSB Wireless LAN Adapter Table of Contents Easy Settings for Moderator Function Advanced SettingsChange Configuration Set Restart Setting the Moderator FunctionRequired Operating Environment for Computers Operating Environment and ConfigurationModulation Form Network Specifications of the ProjectorPage About LAN Functions ChapterFlow of Image Transfer LAN Functions and the FeaturesAbout LAN Functions Image Projecting System via LANAn Example of the Connection LAN Connection Modes Operate the computer mouse with the remote control Page Setup Procedures Network Configuration has completed Setup ProceduresInstall the software on computers Installing the Software Setup Procedures Names and Functions of the Operation Screen Network Connection Standby Display Names and Functions of the Operation ScreenParts Names and Functions of the Screen NetworkModule ClientAdvanced Settings NetworkModule Moderator Page Wired LAN Configurations Setting Procedure Wired LAN ConfigurationsConnecting to the LAN Line Network Environment SettingsWired LAN Configurations Confirming the Operation English User PIN Code Wired Factory Default See the menu aboveDNS Domain System Blank Password User PIN Code Factory Default Setting of the Wired LANPage Wireless LAN Configurations Setting Procedures Wireless LAN ConfigurationsAttaching the USB Wireless LAN Adapter Setting the Network EnvironmentWireless LAN Configurations Easy Setting Computer environment and Wireless LAN connection Wireless InformationWireless Factory Default Leap User Blank Password Wireless LAN Factory Default SettingsOperation of Network Viewer Configurations with BrowserBrowser Environment Configurations with BrowserBrowser Configuration IntroductionStarting up the Browser Information Screen of Wireless LAN Screen of Wired LANParameters and descriptions of Information Quick Setup One-byte characters. The name set here will be displayed on TCP / IP Name and the password Wireless SettingMail Have entered is displayed as . up to ASCII32 characters Admin PasswordUser PIN code Figure will be displayed as . The password consists Moderator Login PasswordMiscellaneous LAN1-5,.SIMPLE Change Configuration SetRestart Project the Image via the Networks Project the Image via the Networks Use the Moderator Function Moderator Function Use the Moderator FunctionPreparation Procedure for Using the Moderator Function Preparation for Using the Moderator FunctionRegistration of the Moderator Setting the Moderator FunctionRegistration of the Clients Participants Stop Projecting the Clients Images How to Use the Moderator FunctionUnregister from Moderator Status Project the Clients ImagesHow to Use Network Viewer Wireless LAN AdHoc Communication Mode How to Use Network ViewerMechanism of NetworkViewer and the Flow of the Signal Wireless LAN Infrastructure Communication ModeFunctional Conditions of FTP Server Which Provides Images Wired LAN Communication ModeOperation Operating with the PJ Controller Projecting the ImageSpecify the FTP server to provide image data Operating with the Browser Refresh Operating with the projector Wireless LANSet timing to switch images in Auto play mode -240 sec Page How to Use the PJ Controller How to Operate How to Use the PJ ControllerInitial Settings Registering E-mail Address Mail SettingEnter the message to attach the E-mail Check Option itemsTurning on/off the projector Power & StatusCheck the status of the projector Input ControlPC adjustment System Adjustment Image Adjustment Screen Setting Select On to automatically set the PC adjustment Confirm the actual adjustment ServiceLoading the Set Select Set Number and name the settingSave the setting Set Multi Control Turn on or off the projector Appendix Computer cannot connect projectors TroubleshootingWireless LAN Connection cannot be established AppendixWEP Speed of playing back images are very slow Cannot start up the browserProjector / PJ Controller cannot be turned on/off Network Viewer does not work with the projector operationTerminology Setting up the IP address with arp + pingcommand

XG-705A specifications

The Eiki XG-705A is a high-performance, versatile projector designed for various applications, ranging from corporate presentations to educational purposes. Known for its exceptional image quality and robust build, the XG-705A is a go-to choice for professionals seeking reliability and ease of use.

One of the standout features of the Eiki XG-705A is its powerful lamp, which delivers bright and vibrant images with a lumens rating that ensures clarity even in well-lit environments. The projector boasts a resolution of 1024 x 768 pixels, providing crisp images that enhance the viewing experience. This model is capable of projecting larger images without compromising on quality, making it ideal for larger venues.

The XG-705A employs advanced color technology, ensuring that colors are rich and accurate. Its high contrast ratio enhances the depth of images, resulting in superb visual performance that is vital for presentations and video content. The projector also supports a variety of image formats, making it compatible with different media sources.

In terms of connectivity, the Eiki XG-705A is equipped with multiple input options, including HDMI, VGA, and composite inputs, allowing seamless integration with computers, laptops, and media players. This extensive range of inputs makes it easy to switch between devices during presentations, increasing efficiency and ease of use.

The projector features integrated audio capabilities, providing sufficient sound quality without the need for external speakers during small to medium-sized meetings. For larger setups, audio outputs are available for connection to external sound systems.

A user-friendly interface and intuitive remote control add to the convenience of the XG-705A. The onboard menu system is easy to navigate, allowing users to adjust settings such as brightness, contrast, and aspect ratio with minimal effort.

Durability is another key characteristic of the Eiki XG-705A. Its rugged design ensures it can withstand the rigors of frequent transport and installation, making it suitable for rental or permanent installations. The projector's lamp life is impressive, reducing the frequency of replacements and ultimately lowering the total cost of ownership.

In summary, the Eiki XG-705A stands out in the projector market for its combination of brightness, versatility, and durability. With advanced color technology, multiple connectivity options, and ease of use, it is a reliable choice for anyone in need of a quality projection solution. Whether for business presentations or educational settings, the Eiki XG-705A is designed to deliver exceptional performance.
Top Page Image Contents